scholarly journals Plasmonic Refractive Index Sensor and Plasmonic Bandpass Filter Including Waveguide and Four Teeth Based On Fano Resonances

2022 ◽  
Author(s):  
Vahid Najjari ◽  
Saeed Mirzanejhad ◽  
Amin Ghadi
Keyword(s):  
Refractive Index ◽  
Bandpass Filter ◽  
Resonance Wavelength ◽  
Maximum Sensitivity ◽  
Refractive Index Sensor ◽  
Fano Resonances ◽  
Line Shapes ◽  
Metal Waveguide ◽  
Metal Insulator Metal ◽  
Difference Time

Abstract A plasmonic refractive index sensor including a Metal-Insulator-Metal waveguide (MIM) with four teeth is proposed. Transmittance (T), Sensitivity (S) and Figure of Merit (FOM) investigated numerically and analysed via Finite Difference Time Domain method (FDTD). The simulation results show the generation of double Fano resonances in the system that the resonance wavelength and the resonance line-shapes can be adjusted by changing the geometry of the device. By optimizing the structure in the initial configuration, the maximum sensitivity of 1078nm/RIU and FOM of 3.62×105 is achieved. Then change the structure parameters. In this case, the maximum sensitivity and FOM are 1041nm/RIU and 2.94×104 respectively, thus two detection points can be used for the refractive index sensor. Due to proper performance and adjustable Fano resonance points, this structure is significant for fabricating sensitive refractive index sensor and plasmonic bandpass filter.

scholarly journals A Plasmonic Chip-Scale Refractive Index Sensor Design Based on Multiple Fano Resonances

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3181 ◽  
Author(s):  
Kunhua Wen ◽  
Li Chen ◽  
Jinyun Zhou ◽  
Liang Lei ◽  
Yihong Fang
Keyword(s):  
Refractive Index ◽  
Fdtd Method ◽  
High Sensitivity ◽  
Refractive Index Sensor ◽  
Fano Resonances ◽  
Metal Insulator Metal ◽  
High Figure ◽  
On Chip ◽  
Difference Time ◽  
Sub Wavelength

In this paper, multiple Fano resonances preferred in the refractive index sensing area are achieved based on sub-wavelength metal-insulator-metal (MIM) waveguides. Two slot cavities, which are placed between or above the MIM waveguides, can support the bright modes or the dark modes, respectively. Owing to the mode interferences, dual Fano resonances with obvious asymmetrical spectral responses are achieved. High sensitivity and high figure of merit are investigated by using the finite-difference time-domain (FDTD) method. In view of the development of chip-scale integrated photonics, two extra slot cavities are successively added to the structure, and consequently, three and four ultra-sharp Fano peaks with considerable performances are obtained, respectively. It is believed that this proposed structure can find important applications in the on-chip optical sensing and optical communication areas.

scholarly journals Refractive index sensor and filter of metal-insulator-metal waveguide based on ring resonator embedded by cross structure

2018 ◽  
Vol 67 (19) ◽  
pp. 197301
Author(s):  
Qi Yun-Ping ◽  
Zhang Xue-Wei ◽  
Zhou Pei-Yang ◽  
Hu Bing-Bing ◽  
Wang Xiang-Xian
Keyword(s):  
Refractive Index ◽  
Ring Resonator ◽  
Refractive Index Sensor ◽  
Metal Insulator ◽  
Metal Waveguide ◽  
Metal Insulator Metal ◽  
Cross Structure

scholarly journals Highly Sensitive and Tunable Plasmonic Sensor Based on a Nanoring Resonator with Silver Nanorods

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1399 ◽  
Author(s):  
Chung-Ting Chou Chao ◽  
Yuan-Fong Chou Chau ◽  
Hung Ji Huang ◽  
N. T. R. N. Kumara ◽  
Muhammad Raziq Rahimi Kooh ◽  
...  
Keyword(s):  
Refractive Index ◽  
System Response ◽  
Refractive Index Sensor ◽  
Plasmonic Sensor ◽  
Refractive Index Sensitivity ◽  
Silver Nanorods ◽  
Metal Waveguide ◽  
Highly Sensitive ◽  
Metal Insulator Metal ◽  
Index Sensitivity

We numerically and theoretically investigate a highly sensitive and tunable plasmonic refractive index sensor that is composed of a metal-insulator-metal waveguide with a side-coupled nanoring, containing silver nanorods using the finite element method. Results reveal that the presence of silver nanorods in the nanoring has a significant impact on sensitivity and tunability performance. It gives a flexible way to tune the system response in the proposed structure. Our designed sensor has a sensitivity of 2080 nm/RIU (RIU is the refractive index unit) along with a figure of merit and a quality factor of 29.92 and 29.67, respectively. The adequate refractive index sensitivity can increase by adding the silver nanorods in a nanoring, which can induce new surface plasmon polaritons (SPPs) modes that cannot be found by a regular nanoring. For a practical application, a valid introduction of silver nanorods in the nanoring can dramatically reduce the dimension of the proposed structure without sacrificing performance.

scholarly journals Refractive Index Sensor Based on Fano Resonances in Metal-Insulator-Metal Waveguides Coupled with Resonators

Sensors ◽  
2017 ◽  
Vol 17 (4) ◽  
pp. 784 ◽  
Author(s):  
Yue Tang ◽  
Zhidong Zhang ◽  
Ruibing Wang ◽  
Zhenyin Hai ◽  
Chenyang Xue ◽  
...  
Keyword(s):  
Refractive Index ◽  
Refractive Index Sensor ◽  
Fano Resonances ◽  
Metal Insulator ◽  
Metal Insulator Metal

scholarly journals Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide

Sensors ◽  
2018 ◽  
Vol 18 (5) ◽  
pp. 1348 ◽  
Author(s):  
Zicong Guo ◽  
Kunhua Wen ◽  
Qinyang Hu ◽  
Wenhui Lai ◽  
Jiyan Lin ◽  
...  
Keyword(s):  
Refractive Index ◽  
Refractive Index Sensor ◽  
Metal Insulator ◽  
Metal Waveguide ◽  
Metal Insulator Metal

A refractive index sensor based on an analogy T shaped metal–insulator–metal waveguide

Optik ◽  
2018 ◽  
Vol 172 ◽  
pp. 1199-1204 ◽  
Author(s):  
Liu Wang ◽  
Ya-Ping Zeng ◽  
Zhi-Yong Wang ◽  
Xiong-Ping Xia ◽  
Qiu-Qun Liang
Keyword(s):  
Refractive Index ◽  
Refractive Index Sensor ◽  
Metal Insulator ◽  
Metal Waveguide ◽  
Metal Insulator Metal

scholarly journals Numerical investigation of a small footprint plasmonic Bragg grating structure with a high extinction ratio

2020 ◽  
Vol 12 (3) ◽  
pp. 82
Author(s):  
Muhammad Ali Butt
Keyword(s):  
Refractive Index ◽  
Bragg Grating ◽  
Refractive Index Sensor ◽  
Metal Insulator ◽  
Grating Structure ◽  
Refractive Index Sensing ◽  
Sensing Applications ◽  
Metal Waveguide ◽  
Metal Insulator Metal ◽  
Small Footprint

In this paper, miniaturized design of a plasmonic Bragg grating filter is investigated via the finite element method (FEM). The filter is based on a plasmonic metal-insulator-metal waveguide deposited on a quartz substrate. The corrugated Bragg grating designed for near-infrared wavelength range is structured on both sides of the waveguide. The spectral characteristics of the filter are studied by varying the geometric parameters of the filter design. As a result, the maximum ER and bandwidth of 36.2 dB and 173 nm is obtained at λBragg=976 nm with a filter footprint of as small as 1.0 x 8.75 µm2, respectively. The ER and bandwidth can be further improved by increasing the number of grating periods and the strength of the grating, respectively. Moreover, the Bragg grating structure is quite receptive to the refractive index of the medium. These features allow the employment of materials such as polymers in the metal-insulator-metal waveguide which can be externally tuned or it can be used for refractive index sensing applications. The sensitivity of the proposed Bragg grating structure can offer a sensitivity of 950 nm/RIU. We believe that the study presented in this paper provides a guideline for the realization of small footprint plasmonic Bragg grating structures which can be employed in filter and refractive index sensing applications. Full Text: PDF ReferencesJ. W. Field et al., "Miniaturised, Planar, Integrated Bragg Grating Spectrometer", 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference (CLEO/Europe-EQEC), Munich, Germany, 2019, CrossRef L. Cheng, S. Mao, Z. Li, Y. Han, H.Y. Fu, "Grating Couplers on Silicon Photonics: Design Principles, Emerging Trends and Practical Issues", Micromachines, 11, 666 (2020). CrossRef J. Missinne, N. T. Beneitez, M-A. Mattelin, A. Lamberti, G. Luyckx, W. V. Paepegem, G. V. Steenberge, "Bragg-Grating-Based Photonic Strain and Temperature Sensor Foils Realized Using Imprinting and Operating at Very Near Infrared Wavelengths", Sensors, 18, 2717 (2018). CrossRef M. A. Butt, S.N. Khonina, N.L. Kazanskiy, "Numerical analysis of a miniaturized design of a Fabry–Perot resonator based on silicon strip and slot waveguides for bio-sensing applications", Journal of Modern Optics, 66, 1172-1178 (2019). CrossRef H. Qiu, J. Jiang, P. Yu, T. Dai, J. Yang, H. Yu, X. Jiang, "Silicon band-rejection and band-pass filter based on asymmetric Bragg sidewall gratings in a multimode waveguide", Optics Letters, 41, 2450 (2016). CrossRef M. A. Butt, S.N. Khonina, N.L. Kazanskiy, "Optical elements based on silicon photonics", Computer Optics, 43, 1079-1083 (2019). CrossRef N. L. Kazanskiy, S.N. Khonina, M.A. Butt, "Plasmonic sensors based on Metal-insulator-metal waveguides for refractive index sensing applications: A brief review", Physica E, 117, 113798 (2020). CrossRef L. Lu et al, "Mode-Selective Hybrid Plasmonic Bragg Grating Reflector", IEEE Photonics Technology Letters, 22, 1765-1767 (2012). CrossRef R. Negahdari, E. Rafiee, F. Emami, "Design and simulation of a novel nano-plasmonic split-ring resonator filter", Journal of Electromagnetic Waves and Applications, 32, 1925-1938 (2018). CrossRef M. Janfaza, M. A. Mansouri-Birjandi, "Tunable plasmonic band-pass filter based on Fabry–Perot graphene nanoribbons", Applied Physics B, 123, 262 (2017). CrossRef C. Wu, G. Song, L. Yu, J.H. Xiao, "Tunable narrow band filter based on a surface plasmon polaritons Bragg grating with a metal–insulator–metal waveguide", Journal of Modern Optics, 60, 1217-1222 (2013). CrossRef J. Zhu, G. Wang, "Sense high refractive index sensitivity with bragg grating and MIM nanocavity", Results in Physics, 15, 102763 (2019). CrossRef Y. Binfeng, H. Guohua, C. Yiping, "Design of a compact and high sensitive refractive index sensor base on metal-insulator-metal plasmonic Bragg grating", Optics Express, 22, 28662-28670 (2014). CrossRef A.D. Simard, Y. Painchaud, S. Larochelle, "Small-footprint integrated Bragg gratings in SOI spiral waveguides", International Quantum Electronics Conference Lasers and Electro-Optics Europe, IEEE, Munich, Germany (2013). CrossRef C. Klitis, G. Cantarella, M. J. Strain, M. Sorel, "High-extinction-ratio TE/TM selective Bragg grating filters on silicon-on-insulator", Optics Letters, 42, 3040 (2017). CrossRef J. Ctyroky et al., "Design of narrowband Bragg spectral filters in subwavelength grating metamaterial waveguides", Optics Express, 26, 179 (2018). CrossRef M.A. Butt, N.L. Kazanskiy, S.N. Khonina, "Hybrid plasmonic waveguide race-track µ-ring resonator: Analysis of dielectric and hybrid mode for refractive index sensing applications", Laser Phys., 30, 016202 (2020). CrossRef M. A. Butt, N.L. Kazanskiy, S.N. Khonina, "Label-free detection of ambient refractive index based on plasmonic Bragg gratings embedded resonator cavity sensor", Journal of Modern Optics, 66, 1920-1925 (2019). CrossRef N. L. Kazanskiy, M.A. Butt, Photonics Letters of Poland, 12, 1-3 (2020). CrossRef Z. Guo, K. Wen, Q. Hu, W. Lai, J. Lin, Y. Fang, "Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide", Sensors, 18, 1348 (2018). CrossRef

Independently tunable dual resonant dip refractive index sensor based on metal-insulator-metal waveguide with Q-shaped resonant cavity

2022 ◽  
Author(s):  
Haowen Chen ◽  
Yunping Qi ◽  
Jinghui Ding ◽  
Yujiao Yuan ◽  
Zhenting Tian ◽  
...  
Keyword(s):  
Refractive Index ◽  
Resonant Cavity ◽  
Fdtd Method ◽  
High Sensitivity ◽  
Refractive Index Sensor ◽  
Metal Insulator ◽  
Metal Waveguide ◽  
Metal Insulator Metal ◽  
Simulation Results ◽  
Refractive Index Sensors

Abstract A plasmonic resonator system consisting of a metal-insulator-metal waveguide and a Q-shaped resonant cavity is proposed in this paper. The transmission properties of surface plasmon polaritons in this structure are investigated using the finite difference in time domain (FDTD) method, and the simulation results contain two resonant dips. And the physical mechanism is studied by the multimode interference coupled mode theory (MICMT), the theoretical results are in highly consistent with the simulation results. Furthermore, the parameters of the Q-shaped cavity can be controlled to adjust two dips respectively. The refractive index sensor with a sensitivity of 1578nm/RIU and figure of merit (FOM) of 175, performs better than most of the similar structures. Therefore, the results of the study are instructive for the design and application of high sensitivity nanoscale refractive index sensors.

Plasmonic refractive index sensor with multi-channel Fano resonances based on MIM waveguides

2020 ◽  
Vol 34 (16) ◽  
pp. 2050173
Author(s):  
Yihong Fang ◽  
Kunhua Wen ◽  
Zhengfeng Li ◽  
Bingye Wu ◽  
Zicong Guo
Keyword(s):  
Refractive Index ◽  
Optical Filter ◽  
High Sensitivity ◽  
Refractive Index Sensor ◽  
Fano Resonances ◽  
Coupled Mode ◽  
Dual Channel ◽  
Metal Insulator Metal ◽  
Group Delays ◽  
Coupled Cavity

A multi-channel Fano resonant structure is proposed and analyzed based on subwavelength metal–insulator–metal (MIM) waveguides. First, two MIM output ports associated with specific side-coupled cavities are designed to locate at the center and quarter positions of an end-coupled cavity, respectively. Since the interference between the dark and bright modes, dual-channel Fano resonances with asymmetrical lines shapes are obtained at both ports, respectively. High sensitivity and figure of merits are investigated. Besides, phase shifts are also investigated leading to positive and negative group delays available at the Fano peaks and dips, respectively. Likewise, two extra output ports with identical resonant cavities are placed on the other side of the end-coupled cavity. In this case, four-channel Fano resonances with considerable performances are obtained. The proposed structure is analyzed by the coupled mode theory and the finite difference time domain method. It is believed this device can be used as a chip-scale refractive index sensor and optical filter.

Sign in / Sign up

Export Citation Format

Share Document