scholarly journals Development of Fused Deposition Modeling Using Five-Axis Machine and Printing Methods

2021 ◽  
Author(s):  
Haiguang zhang ◽  
Kunlong zhao ◽  
Di Liu ◽  
Qingxi Hu ◽  
Herfried Lammer
Keyword(s):  
Degrees Of Freedom ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Industrial Applications ◽  
3D Printer ◽  
Lightweight Structures ◽  
Fused Deposition ◽  
3D Geometry ◽  
Deposition Modeling ◽  
Five Axis

Abstract Fused deposition modeling (FDM) is one of most widely used 3D printing technologies due to inexpensive equipment and materials, and easy to operate. FDM forms a 3D geometry by slicing a model along the XY-plane and assembling the resulting individual layers along the Z-axis, with extruded thermoplastic filaments. FDM printed parts usually need supporting structures, have stair step effect, and unfavorable mechanical properties. In order to address these deficiencies, a five-axis 3D printer and corresponding printing methods are proposed and developed in this paper. The 3D printer was designed five degrees of freedom through adding a platform that can rotate and swing. Based on the obtained results from different case studies, the discussed machine and methods could become more significant in industrial applications such as low cost, fabricating parts with better surface quality and lightweight structures.

Development of Four-Axis 3D Printer with Fused Deposition Modeling Technology

2017 ◽  
Vol 11 (2) ◽  
pp. 278-286 ◽  
Author(s):  
Kyosuke Kawagishi ◽  
◽  
Shoma Umetani ◽  
Ken Tanaka ◽  
Eiji Ametani ◽  
...  
Keyword(s):  
Machine Tool ◽  
Degrees Of Freedom ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
3D Printer ◽  
Modeling Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Complex Features ◽  
Five Axis

A new four-axis 3D printer using fused-deposition modeling (FDM) technology has been developed. The hardware components, consisting of a mechanical structure and servo-control system, and an original computer-aided machining (CAM) system were developed. Three-dimensional printers, particularly those using FDM technology, have gained popularity even in hobby use for the easy modeling of special and original parts. Three-axis control systems using stepping motors or servomotors are generally used for the development of conventional 3D printers. The nozzle portion is therefore constrained in one direction. This leads to limitations in modeling 3D shapes. Adding degrees of freedom is necessary to create more complex features. We designed a new 3D printer with multi-axis control to address this problem. Our final goal is the development of a five-axis 3D printer. We started with a four-Axis 3D printer as a first step. The number of lamination directions is increased from three to four. As conventional CAM systems cannot be used to program the desired lamination for a four-axis 3D printer, a new CAM system using the Kodatuno kernel was developed. The system can determine the nozzle orientation based on the machine tool formulation. This paper reports the developmental background and an overview of the developed machine tool as well as its characteristics, its evaluation results, and our future plans.

scholarly journals 3D Printed Fully Recycled TiO2-Polystyrene Nanocomposite Photocatalysts for Use against Drug Residues

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2144
Author(s):  
Maria Sevastaki ◽  
Mirela Petruta Suchea ◽  
George Kenanakis
Keyword(s):  
Tio2 Nanoparticles ◽  
Large Scale ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Real Life ◽  
3D Printer ◽  
Alternative Route ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed

In the present work, the use of nanocomposite polymeric filaments based on 100% recycled solid polystyrene everyday products, enriched with TiO2 nanoparticles with mass concentrations up to 40% w/w, and the production of 3D photocatalytic structures using a typical fused deposition modeling (FDM)-type 3D printer are reported. We provide evidence that the fabricated 3D structures offer promising photocatalytic properties, indicating that the proposed technique is indeed a novel low-cost alternative route for fabricating large-scale photocatalysts, suitable for practical real-life applications.

scholarly journals Design and Validation of an Open Source 3D Printer Based on Digital Ultraviolet Light Processing (DLP), for the Improvement of Traditional Artistic Casting Techniques for Microsculptures

2021 ◽  
Vol 11 (7) ◽  
pp. 3197
Author(s):  
Jose Luis Saorin ◽  
Manuel Drago Diaz-Alemán ◽  
Jorge De la Torre-Cantero ◽  
Cecile Meier ◽  
Ithaisa Pérez Conesa
Keyword(s):  
Open Source ◽  
Ultraviolet Light ◽  
Fused Deposition Modeling ◽  
Liquid Crystal Display ◽  
Low Cost ◽  
3D Printer ◽  
Digital Light Processing ◽  
Fused Deposition ◽  
3D Printers ◽  
Deposition Modeling

The adoption of open-source digital manufacturing technologies in small art workshops may improve their competitiveness. Pieces modeled by computer and made with FDM (Fused Deposition Modeling) 3D printers that use PLA (polylactic acid) can be implemented in the procedures of artistic casting. However, models printed by PLA are limited to approximate minimum sizes of 3 cm, and the optimal layer height resolution is 0.1 mm. These sizes and resolutions are not suitable for creating microsculptures used, in many cases, in jewelry. An alternative to solve this limitation, is to use a DMLS (Direct Metal Laser Sintering) 3D printer. However, due to its high cost, it is a technology that is difficult to introduce in small artistic foundries. This work detailed the design and validation of a DLP (Digital Light Processing) 3D printer, using backlit LCD (Liquid Crystal Display) screens with ultraviolet light. Its development is totally “open source” and is proposed as a kit made up of electronic components, based on Arduino and easy to access mechanical components in the market. Most parts can be manufactured in low cost FDM (Fused Deposition Modeling) 3D printers. The result is an affordable, high resolution (0.021 mm), and open-design printer that can be implemented in artistic contexts.

The feasibility of printing polylactic acid-nanohydroxyapatite composites using a low-cost fused deposition modeling 3D printer

2016 ◽  
Vol 134 (13) ◽  
Author(s):  
Carola Esposito Corcione ◽  
Francesca Gervaso ◽  
Francesca Scalera ◽  
Francesco Montagna ◽  
Alessandro Sannino ◽  
...  
Keyword(s):  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
3D Printer ◽  
Fused Deposition ◽  
Deposition Modeling

Comparison on Dimensional Accuracy Using a Newly Developed Nozzle for Open-Source 3D Printer

2016 ◽  
Vol 859 ◽  
pp. 15-19 ◽  
Author(s):  
Nor Aiman Sukindar ◽  
Mohd Khairol Anuar Mohd Ariffin ◽  
B.T. Hang Tuah bin Baharudin ◽  
Che Nor Aiza Jaafar ◽  
Mohd Idris Shah Ismail
Keyword(s):  
Open Source ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Dimensional Accuracy ◽  
3D Printer ◽  
Constant Heat ◽  
New Era ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Increasing Demand

Fused Deposition Modeling (FDM) or also known as RepRap (Replicating Rapid Prototyper) is a technology that is synonym with 3D printing. This technology has entered a new era with an increasing demand among the community. It has grown commercially in the market of open-source system and it is relatively low cost. Many efforts have been put towards the development of the system in both hardware and software to increase the quality and the performance. The research highlights the development of a new nozzle to evaluate the performance on dimensional accuracy in comparison to the original nozzle. The nozzle emphasizes the die angle for the polylactic acid (PLA) material, the liquefier design which provide constant heat in the liquefier chamber, as well as insulator for the liquefier using highly insulated material. The dimensional accuracies of both nozzles were compared where the result showed that the new nozzle provided better accuracy and stability on the extruding PLA material.

An Update on the Use of Alginate in Additive Biofabrication Techniques

2019 ◽  
Vol 25 (11) ◽  
pp. 1249-1264 ◽  
Author(s):  
Amoljit Singh Gill ◽  
Parneet Kaur Deol ◽  
Indu Pal Kaur
Keyword(s):  
Fused Deposition Modeling ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Layer By Layer ◽  
Three Dimension ◽  
Anionic Polymer ◽  
Fused Deposition ◽  
The Status ◽  
Deposition Modeling ◽  
Extrusion Printing

Background: Solid free forming (SFF) technique also called additive manufacturing process is immensely popular for biofabrication owing to its high accuracy, precision and reproducibility. Method: SFF techniques like stereolithography, selective laser sintering, fused deposition modeling, extrusion printing, and inkjet printing create three dimension (3D) structures by layer by layer processing of the material. To achieve desirable results, selection of the appropriate technique is an important aspect and it is based on the nature of biomaterial or bioink to be processed. Result & Conclusion: Alginate is a commonly employed bioink in biofabrication process, attributable to its nontoxic, biodegradable and biocompatible nature; low cost; and tendency to form hydrogel under mild conditions. Furthermore, control on its rheological properties like viscosity and shear thinning, makes this natural anionic polymer an appropriate candidate for many of the SFF techniques. It is endeavoured in the present review to highlight the status of alginate as bioink in various SFF techniques.

scholarly journals 3D Printing of Functional Assemblies with Integrated Polymer-Bonded Magnets Demonstrated with a Prototype of a Rotary Blood Pump

2018 ◽  
Vol 8 (8) ◽  
pp. 1275 ◽  
Author(s):  
Kai von Petersdorff-Campen ◽  
Yannick Hauswirth ◽  
Julia Carpenter ◽  
Andreas Hagmann ◽  
Stefan Boës ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Permanent Magnets ◽  
Low Cost ◽  
Magnetic Bearing ◽  
Blood Pump ◽  
Rotary Blood Pump ◽  
Pump Impeller ◽  
Fused Deposition ◽  
Magnetic Components ◽  
Deposition Modeling

Conventional magnet manufacturing is a significant bottleneck in the development processes of products that use magnets, because every design adaption requires production steps with long lead times. Additive manufacturing of magnetic components delivers the opportunity to shift to agile and test-driven development in early prototyping stages, as well as new possibilities for complex designs. In an effort to simplify integration of magnetic components, the current work presents a method to directly print polymer-bonded hard magnets of arbitrary shape into thermoplastic parts by fused deposition modeling. This method was applied to an early prototype design of a rotary blood pump with magnetic bearing and magnetic drive coupling. Thermoplastics were compounded with 56 vol.% isotropic NdFeB powder to manufacture printable filament. With a powder loading of 56 vol.%, remanences of 350 mT and adequate mechanical flexibility for robust processability were achieved. This compound allowed us to print a prototype of a turbodynamic pump with integrated magnets in the impeller and housing in one piece on a low-cost, end-user 3D printer. Then, the magnetic components in the printed pump were fully magnetized in a pulsed Bitter coil. The pump impeller is driven by magnetic coupling to non-printed permanent magnets rotated by a brushless DC motor, resulting in a flow rate of 3 L/min at 1000 rpm. For the first time, an application of combined multi-material and magnet printing by fused deposition modeling was shown. The presented process significantly simplifies the prototyping of products that use magnets, such as rotary blood pumps, and opens the door for more complex and innovative designs. It will also help postpone the shift to conventional manufacturing methods to later phases of the development process.

scholarly journals Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 523 ◽  
Author(s):  
Wei Goh ◽  
Michinao Hashimoto
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Microfluidic Devices ◽  
High Impact ◽  
3D Printer ◽  
Original Design ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Indispensable Tool ◽  
Single Material

Fused deposition modeling (FDM) has become an indispensable tool for 3D printing of molds used for sacrificial molding to fabricate microfluidic devices. The freedom of design of a mold is, however, restricted to the capabilities of the 3D printer and associated materials. Although FDM has been used to create a sacrificial mold made with polyvinyl alcohol (PVA) to produce 3D microchannels, microchannels with free-hanging geometries are still difficult to achieve. Herein, dual sacrificial molding was devised to fabricate microchannels with overhang or helical features in PDMS using two complementary materials. The method uses an FDM 3D printer equipped with two extruders and filaments made of high- impact polystyrene (HIPS) and PVA. HIPS was initially removed in limonene to reveal the PVA mold harboring the design of microchannels. The PVA mold was embedded in PDMS and subsequently removed in water to create microchannels with 3D geometries such as dual helices and multilayer pyramidal networks. The complementary pairing of the HIPS and PVA filaments during printing facilitated the support of suspended features of the PVA mold. The PVA mold was robust and retained the original design after the exposure to limonene. The resilience of the technique demonstrated here allows us to create microchannels with geometries not attainable with sacrificial molding with a mold printed with a single material.

Sign in / Sign up

Export Citation Format

Share Document