The Proton Pump Inhibitor (Lansoprazole Drug) As a Corrosion Inhibitor for High Carbon Steel in Hydrochloric Acid Solution

Author(s):  
Ameena M. Al-bonayan ◽  
Ahmed El-Hossiany ◽  
Dalia M. Eid ◽  
Abd El-Aziz S. Fouda

Abstract The proton pump inhibitor lansoprazole (PPIL) drug is examined as corrosion inhibitor for high carbon steel (HCS) dipped in 1.0M HCl. The study was conducted utilizing ac impedance spectroscopy (EIS), Mass loss (Ml), polarization tests, and surface checks were utilized to illustrate the importance of this PPIL extract to the prevent corrosion process for HCS. The influence of temperature and concentration of PPIL on the efficiency of inhibition were tested. The corrosion mechanism occurs, when the PPIL extract molecules block the active center in the electrode surface. The inhibition efficiency (%IF) of HCS occurs by the adsorption procedure and HCS is subject to the adsorption of Langmuir. Polarization curves showed that PPIL drug is a mixed- type inhibitor that retards the dissolution of HCS. IF % was deliberated with altering in the concentration of PPIL various temperature of the medium. From the outcome data we get that the good agreement in the all methods.

2005 ◽  
Vol 495-497 ◽  
pp. 369-374 ◽  
Author(s):  
Artur Walentek ◽  
Xiahua Hu ◽  
Marc Seefeldt ◽  
Paul van Houtte

This paper presents simulations of the texture development during cold rolling of fully pearlitic steel. In order to investigate the importance of including microstructural aspects into texture simulations the calculations were carried out with the FC Taylor Pearlite model which takes the lamellar microstructure into account and with the FC Taylor and LAMEL model which are dedicated for one phase materials. The results are compared with those for ULC steel. For both materials the LAMEL model results are in good agreement with experimental data, while for the pearlitic steel, the FC Taylor Pearlite model improves the predictions only slightly with respect to the FC Taylor model.


2001 ◽  
Vol 81 (12) ◽  
pp. 2797-2808
Author(s):  
Rustem Bagramov, Daniele Mari, Willy Benoi

2019 ◽  
Vol 2019 (3) ◽  
pp. 29-37
Author(s):  
A.A. Polishko ◽  
◽  
L.B. Medovar ◽  
A.P. Stovpchenko ◽  
E.V. Antipin ◽  
...  

1967 ◽  
Vol 53 (11) ◽  
pp. 1342-1344
Author(s):  
Akira NAKAGAWA ◽  
Akihiro SUZUKI ◽  
Tadatsugu KISHIGAMI ◽  
Norio NAGAI

Alloy Digest ◽  
1991 ◽  
Vol 40 (3) ◽  

Abstract UNS No. G 10600 is a high-carbon steel of low hardenability. It may be used in the as-rolled, annealed, normalized or quenched and-tempered condition, depending on the desired properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-129. Producer or source: Carbon steel mills.


Sign in / Sign up

Export Citation Format

Share Document