scholarly journals Simple Defocus Laser Irradiation to Suppress Self-Absorption in Laser-Induced Breakdown Spectroscopy (LIBS)

Author(s):  
Alion Mangasi Marpaung ◽  
Edward Harefa ◽  
Marincan Pardede ◽  
Indra Karnadi ◽  
Rinda Hedwig ◽  
...  

Abstract This study introduces a novel and extremely simple way for suppressing the self-absorption effect in laser-induced breakdown spectroscopy (LIBS) by utilizing a defocusing laser irradiation technique. It is claimed that defocusing laser irradiation produces more uniform laser plasma due to lower fluence than tight focus laser irradiation, hence greatly lowering the effect of self-absorption in the laser plasma. KCl and NaCl pellet samples were used to demonstrate this achievement. When the defocus position is adjusted to – 6 mm for KCl and NaCl samples, the self-reversal emission lines K I 766.4 nm, K I 769.9 nm, Na I 588.9 nm, and Na I 589.5 nm vanish. Meanwhile, the FWHM values of K I 766.4 and K I 769.9 nm are 0.29 nm and 0.23 nm, respectively, during -6 mm defocus laser irradiation, as opposed to 1.24 nm and 0.86 nm, under tight focus laser irradiation. Additionally, this work demonstrates that when the laser energy is changed in between 10 to 50 mJ, no self-reversal emission occurs when -6 mm defocus laser irradiation is applied. Finally, a linear calibration curve is generated using KCl at a high concentration ranging between K concentration from 16.6–29%. This simple change of defocus laser irradiation will undoubtedly contribute to the suppression of the self-absorption phenomenon, which disrupts LIBS analytical results.

2020 ◽  
Vol 1 (2) ◽  
pp. 5-8
Author(s):  
Komang Gde Suastika, Heri Suyanto, Gunarjo, Sadiana, Darmaji

Abstract - Laser-Induced Breakdown Spectroscopy (LIBS) is one method of atomic emission spectroscopy using laser ablation as an energy source. This method is used to characterize the type of amethysts that originally come from Sukamara, Central Kalimantan. The result of amethyst characterization can be used as a reference for claiming the natural wealth of the amethyst. The amethyst samples are directly taken from the amethyst mining field in the District Gem Amethyst and consist of four color variations: white, black, yellow, and purple. These samples were analyzed by LIBS, using laser energy of 120 mJ, delay time detection of 2 μs and accumulation of 3, with and without cleaning. The purpose of this study is to determine emission spectra characteristics, contained elements, and physical characteristics of each amethyst sample. The spectra show that the amethyst samples contain some elements such as Al, Ca, K, Fe, Gd, Ba, Si, Be, H, O, N, Cl and Pu with various emission intensities. The value of emission intensity corresponds to concentration of element in the sample. Hence, the characteristics of the amethysts are based on their concentration value. The element with the highest concentration in all samples is Si, which is related to the chemical formula of SiO2. The element with the lowest concentration in all samples is Ca that is found in black and yellow amethysts. The emission intensity of Fe element can distinguish between white, purple, and yellow amethyst. If Fe emission intensity is very low, it indicates yellow sample. Thus, we may conclude that LIBS is a method that can be used to characterize the amethyst samples.Key words: amethyst, impurity, laser-induced, breakdown spectroscopy, characteristic, gemstones


2021 ◽  
Vol 51 (3) ◽  
Author(s):  
Hussein Salloom ◽  
Tagreed Hamad

In this work, laser-induced breakdown spectroscopy (LIBS) analysis is optimized for direct estimation of elemental composition, thermal conductivity and hardness for Ni-Cr-Nb alloys. These alloys were chosen with a variable elemental content of niobium and chromium. The influence of laser energy and shot numbers on measuring line intensity was investigated. Based on the ratio between two spectral lines, calibration curves were formed to estimate the element concentration and LIBS results were confirmed with related energy-dispersive X-ray spectroscopy (EDS) data. Hardness and thermal conductivity estimation using LIBS were done by measuring the ratio between two spectral lines, plasma excitation temperature and electron density for different samples. Semi-empirical formulas correlated hardness and thermal conductivity with plasma temperature were established.


2020 ◽  
Vol 35 (7) ◽  
pp. 1495-1495
Author(s):  
Rongxing Yi ◽  
Lianbo Guo ◽  
Changmao Li ◽  
Xinyan Yang ◽  
Jiaming Li ◽  
...  

Correction for ‘Investigation of the self-absorption effect using spatially resolved laser-induced breakdown spectroscopy’ by Rongxing Yi et al., J. Anal. At. Spectrom., 2016, 31, 961–967, DOI: 10.1039/C5JA00500K.


2017 ◽  
Vol 32 (11) ◽  
pp. 2189-2193 ◽  
Author(s):  
Jiaming Li ◽  
Yun Tang ◽  
Zhongqi Hao ◽  
Nan Zhao ◽  
Xinyan Yang ◽  
...  

This paper describes the quantitative evaluation of the self-absorption reduction of minor elements in laser-induced breakdown spectroscopy assisted with laser-stimulated absorption.


2011 ◽  
Vol 179-180 ◽  
pp. 1183-1186 ◽  
Author(s):  
Dong Qing Yuan ◽  
Jian Ting Xu

The plasma was generated by focusing a pulsed Nd:YAG laser at 1064nm and 10ns on the surface of ITO. We investigated the relationship between the signal intensity of LIBS and the pulse energy of laser, and found the signal of the analyze lines of In and Sn increased with the laser energy enhanced proportional. A series of measurements were made to found the optimum time delay between the laser pulse and the beginning of the LIBS spectra acquisition. Through calibration-free method we obtain the temperature of plasma,at the same time we measured the content of In and Sn by the program which writed with matlab.


2000 ◽  
Vol 54 (3) ◽  
pp. 331-340 ◽  
Author(s):  
Andrew K. Knight ◽  
Nancy L. Scherbarth ◽  
David A. Cremers ◽  
Monty J. Ferris

Early in the next century, several space missions are planned with the goal of landing craft on asteroids, comets, the Moon, and Mars. To increase the scientific return of these missions, new methods are needed to provide (1) significantly more analyses per mission lifetime, and (2) expanded analytical capabilities. One method that has the potential to meet both of these needs for the elemental analysis of geological samples is laser-induced breakdown spectroscopy (LIBS). These capabilities are possible because the laser plasma provides rapid analysis and the laser pulse can be focused on a remotely located sample to perform a stand-off measurement. Stand-off is defined as a distance up to 20 m between the target and laser. Here we present the results of a characterization of LIBS for the stand-off analysis of soils at reduced air pressures and in a simulated Martian atmosphere (5–7 torr pressure of CO2) showing the feasibility of LIBS for space exploration. For example, it is demonstrated that an analytically useful laser plasma can be generated at distances up to 19 m by using only 35 mJ/pulse from a compact laser. Some characteristics of the laser plasma at reduced pressure were also investigated. Temporally and spectrally resolved imaging showed significant changes in the plasma as the pressure was reduced and also showed that the analyte signals and mass ablated from a target were strongly dependent on pressure. As the pressure decreased from 590 torr to the 40–100 torr range, the signals increased by a factor of about 3–4, and as the pressure was further reduced the signals decreased. This behavior can be explained by pressure-dependent changes in the mass of material vaporized and the frequency of collisions between species in the plasma. Changes in the temperature and the electron density of the plasmas with pressure were also examined and detection limits for selected elements were determined.


2016 ◽  
Vol 31 (4) ◽  
pp. 961-967 ◽  
Author(s):  
Rongxing Yi ◽  
Lianbo Guo ◽  
Changmao Li ◽  
Xinyan Yang ◽  
Jiaming Li ◽  
...  

This study discovered the distributional difference of self-absorption effect in laser-induced breakdown spectroscopy, and investigated the method to reduce the self-absorption effect.


2020 ◽  
Vol 74 (3) ◽  
pp. 340-346 ◽  
Author(s):  
Mark Gragston ◽  
Paul Hsu ◽  
Anil Patnaik ◽  
Zhili Zhang ◽  
Sukesh Roy

Time-gated picosecond laser-induced breakdown spectroscopy (ps-LIBS) for the determination of local equivalence ratios in atmospheric-pressure adiabatic methane–air flames is demonstrated. Traditional LIBS for equivalence-ratio measurements employ nanosecond (ns)-laser pulses, which generate excessive amounts of continuum, reducing measurement accuracy and precision. Shorter pulse durations reduce the continuum emission by limiting avalanche ionization. Furthermore, by contrast the use of femtosecond lasers, plasma emission using picosecond-laser excitation has a high signal-to-noise ratio (S/N), allowing single-shot measurements suitable for equivalence-ratio determination in turbulent reacting flows. We carried out an analysis of the dependence of the plasma emission ratio Hα (656 nm)/NII (568 nm) on laser energy and time-delay for optimization of S/N and minimization of measurement uncertainties in the equivalence ratios. Our finding shows that higher laser energy and shorter time delay reduces measurement uncertainty while maintaining high S/N. In addition to atmospheric-pressure flame studies, we also examine the stability of the ps-LIBS signal in a high-pressure nitrogen cell. The results indicate that the plasma emission and spatial position could be stable, shot-to-shot, at elevated pressure (up to 40 bar) using a lower excitation energy. Our work shows the potential of using ps-duration pulses to improve LIBS-based equivalence-ratio measurements, both in atmospheric and high-pressure combustion environments.


2009 ◽  
Vol 63 (5) ◽  
pp. 549-554 ◽  
Author(s):  
Sachin Joshi ◽  
Daniel B. Olsen ◽  
Cosmin Dumitrescu ◽  
Paulius V. Puzinauskas ◽  
Azer P. Yalin

In this contribution we present the first demonstration of simultaneous use of laser sparks for engine ignition and laser-induced breakdown spectroscopy (LIBS) measurements of in-cylinder equivalence ratios. A 1064 nm neodynium yttrium aluminum garnet (Nd:YAG) laser beam is used with an optical spark plug to ignite a single cylinder natural gas engine. The optical emission from the combustion initiating laser spark is collected through the optical spark plug and cycle-by-cycle spectra are analyzed for Hα (656 nm), O (777 nm), and N (742 nm, 744 nm, and 746 nm) neutral atomic lines. The line area ratios of Hα/O777, Hα/N746, and Hα/Ntot (where Ntot is the sum of areas of the aforementioned N lines) are correlated with equivalence ratios measured by a wide band universal exhaust gas oxygen (UEGO) sensor. Experiments are performed for input laser energy levels of 21 mJ and 26 mJ, compression ratios of 9 and 11, and equivalence ratios between 0.6 and 0.95. The results show a linear correlation ( R2 > 0.99) of line intensity ratio with equivalence ratio, thereby suggesting an engine diagnostic method for cylinder resolved equivalence ratio measurements.


Sign in / Sign up

Export Citation Format

Share Document