scholarly journals Elicitation of Phenylpropanoids in Maqui (Aristotelia chilensis [Mol.] Stuntz) Plants Micropropagated in Photomixotrophic Temporary Immersion Bioreactors (TIBs).

2021 ◽  
Author(s):  
Giulia E Trentini ◽  
Makarena Rojas ◽  
Daniela Gajardo ◽  
Débora Alburquenque ◽  
Evelyn Villagra ◽  
...  
Keyword(s):  
Culture Medium ◽  
Wild Plants ◽  
Control Treatment ◽  
Multiplication Rate ◽  
Fresh Weight ◽  
Temporary Immersion ◽  
Air Treatment ◽  
The Third ◽  
Aristotelia Chilensis

Abstract A biotechnological system for the production of plants biomass and phenylpropanoids of maqui was developed in photomixotrophic TIBs. The in vitro maqui multiplication was evaluated using combinations of TDZ and BAP in TIBs 1L capacity. Treatment of MS basal supplemented with TDZ 1 mg/l shows the best results for the variables fresh weight and multiplication rate. Photomixotrophic conditions were standardized in media with 3%, 2%, 1%, 0% sucrose at a light intensity of 100 µM m− 2s− 1. The treatments reduced in sucrose (1% and 2%) and air supplemented with 0.4 MPa CO2 do not differ significantly in biomass production (fresh weight per cluster of plants) compared to the control treatment with sucrose 3% and standard air. Treatment with ABA (1m/l) induced the production and accumulation of phenylpropanoids metabolites in maqui cultures bioreactors. Phenylpropanoids in in vitro biomass of maqui and culture medium from TIBs were determined in parallel with control samples from wild plants and mature fruits. After the third day of analysis, not significant differences in polyphenols and anthocyanin contents were verified between the treatments of maqui in TIBs + ABA and controls. The non-significant differences in the contents of polyphenols and anthocyanin were maintained until the 15 days of analysis. The antioxidant capacity comparing samples of maqui in bioreactors and wild plants showed no significant differences by the ORAC test from day 5 to day 15 of the study.

scholarly journals Temporary immersion biorreators: efficient technique for the propagation of the ‘Pircinque’ strawberry

2019 ◽  
Vol 41 (1) ◽  
Author(s):  
Samila Silva Camargo ◽  
Leo Rufato ◽  
Maicon Magro ◽  
André Luiz Kulkamp de Souza
Keyword(s):  
Liquid Medium ◽  
Culture Medium ◽  
Culture Media ◽  
Time Factors ◽  
Efficient Technique ◽  
Control Treatment ◽  
Solid Culture ◽  
Temporary Immersion ◽  
Solid Culture Medium

Abstract The in vitro propagation technique via temporary immersion bioreactors is a tool that, through the culture in a liquid medium, allows an increase in the efficiency of seedling production. Several researches with the strawberry crop have shown greater efficiency of the system compared to the conventional process of micropropagation in solid medium. In this sense, the objective herein was to establish a protocol of multiplication and rooting of the ‘Pircinque’ strawberry, in temporary immersion bioreactors. Two distinct and independent studies were carried out, characterized by the multiplication and rooting stages of strawberry explants, newly introduced and registered in Brazil. Two culture media (MS and KNOP) were studied and, as a control treatment, the growth of the explants in solid culture medium was evaluated with the addition of 5 g L-1 of agar. Different immersion times of the culture medium were explored: five or eight times a day, for 15 minutes. The study was composed of the culture medium and immersion time factors, as well as the control (solid) treatment. It was verified that the use of temporary immersion bioreactors system is an efficient technique for the multiplication and rooting of explants of strawberry cv. Pircinque, when compared to the conventional method of micropropagation with the use of solid culture medium, making it possible to optimize the production of seedlings in biofactories. The MS liquid medium, in contact with explants of ‘Pircinque’ strawberry five times a day, increased the growth of the aerial part and the root system.

scholarly journals Comparison of Different Semi-Automated Bioreactors for In Vitro Propagation of Taro (Colocasia esculenta L. Schott)

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1010
Author(s):  
Eucario Mancilla-Álvarez ◽  
Juan Antonio Pérez-Sato ◽  
Rosalía Núñez-Pastrana ◽  
José L. Spinoso-Castillo ◽  
Jericó J. Bello-Bello
Keyword(s):  
Culture Medium ◽  
Solid Medium ◽  
Survival Rates ◽  
Shoot Multiplication ◽  
Control Treatment ◽  
Multiplication Rate ◽  
Solid Culture ◽  
Solid Culture Medium ◽  
Semi Solid

Taro is important for its nutritional content, medicinal use, and bioethanol production. The aim of the present study was to compare different semi-automated bioreactors (SABs) during in vitro multiplication of C. esculenta. The SABs used were temporary immersion bioreactors (TIBs), SETIS™ bioreactors and ebb-and-flow bioreactors; semi-solid culture medium was used as a control treatment. At 30 d of culture, different developmental variables, determination of chlorophyll, stomatal content, and survival percentage during acclimatization were evaluated. SABs increased the shoot multiplication rate relative to the semi-solid medium; however, the SETIS™ bioreactor showed the highest shoot production, with 36 shoots per explant, and the highest chlorophyll content. The stomatal index was higher in the semi-solid medium compared to the SABs, while the percentage of closed stomata was higher in the SABs than in the semi-solid culture medium. The survival rate during acclimatization showed no differences among the culture systems assessed, obtaining survival rates higher than 99%. In conclusion, the SETIS™ bioreactor showed the highest multiplication rate; however, other bioreactor alternatives are available for semi-automation and cost reduction for micropropagation of C. esculenta.

scholarly journals Chemical sterilization in in vitro propagation of Arundina bambusifolia Lindl. and Epidendrum ibaguense Kunth

Revista CERES ◽  
2013 ◽  
Vol 60 (4) ◽  
pp. 447-451 ◽  
Author(s):  
Donizetti Tomaz Rodrigues ◽  
Roberto Ferreira Novais ◽  
Víctor Hugo Alvarez Venegas ◽  
José Maria Moreira Dias ◽  
Wagner Campos Otoni ◽  
...  
Keyword(s):  
Activated Charcoal ◽  
Culture Medium ◽  
Flow Chamber ◽  
Nodal Segments ◽  
Control Treatment ◽  
Fresh Weight ◽  
Production Methods ◽  
Weight Yield ◽  
Chemical Sterilization

There is a great demand for simpler and less costly laboratory techniques and for more accessible procedures for orchid breeders who do not have the necessary theoretical basis to use the traditional seed and clone production methods of orchids in vitro. The aim of this study was to assess the use of sodium hypochlorite (NaClO) as a decontaminant in the process of inoculating adult orchid explants of Arundina bambusifolia and Epidendrum ibaguenses. Solutions of NaClO (1.200, 2.400, 3.600, 4.800 and 6.000 mg L-1 - equivalent to 50, 100, 150, 200 and 250 mL L-1 of commercial bleach - CB) were sprayed on the explants (1.0 mL) and the culture medium (GB5), in the presence or absence of activated charcoal (2 g L-1). The explants used were nodal segments of field-grown adult plants. The procedures for inoculating the explants were conducted outside the laminar flow chamber (LFC), except for the control treatment (autoclaved medium and explant inoculation inside the LFC). The best results for fresh weight yield, height and number of shoots were obtained using NaClO in solution at 1.200 mg L-1 (equivalent to 50 mL L-1 commercial bleach) with activated charcoal in the culture medium. Fresh weight figures were 1.10 g/jar for Arundina bambusifolia and 0.16 g/jar for Epidendrum ibaguenses. Spraying the NaClO solutions controls the contamination of the culture medium already inoculated with the explants.

scholarly journals In Vitro Effects of Different Combinations of Phytohormones on Callus Induction from Different Explants of Cabbage Brassica Oleracea Var. Capitata L. Seedlings

2021 ◽  
pp. 3476-3486
Author(s):  
Alaa. M. Hasan ◽  
Ekhlas. A.J. ElKaaby ◽  
Rakad. M.Kh. AL-Jumaily
Keyword(s):  
Brassica Oleracea ◽  
Callus Induction ◽  
Basal Medium ◽  
Culture Conditions ◽  
Control Treatment ◽  
Fresh Weight ◽  
Superior Result ◽  
Significant Difference ◽  
In Vitro Effects

    The leading purpose of this work is the development of efficient culture conditions to induce calli from cabbage (Brassica oleracea var. capitata L.) under in vitro conditions. The mature seeds were surface sterilized with combinations of different concentrations of ethanol and NaOCl in different time durations and  were germinated on MS basal medium. The results revealed that the best sterilization method of cabbage seeds was by using 70% ethanol for one minute, followed by 15 min in 2% (NaOCl). Seedlings were used as donor sources for hypocotyls, cotyledon leaves, true leaves, and shoot tip explants. These explants were cultured on different combinations of cytokinins (TDZ, BAP, Ad) and auxins (IAA, NAA, 2, 4-D) then implanted in Murashige and Skoog (MS) media. 4 weeks after culturing, a significant difference was found among the explants in response to plant hormones. The maximum percentage of callus induction (100%) was using the combinations of 1 BAP + 1 2, 4-D, 1 BAP + 1 NAA, and 1 BAP + 2 2,4-D mg. l-1. In addition, explants responses varied and the hypocotyls showed a superior result (85.71 %) as compared to other explants. For callus fresh weight, the combination of 0.22 TDZ + 79.9 Ad mg. l-1    had a significant effect, causing the highest fresh weight (0.2745g), while control treatment gave the lowest mean of 0.0066 g. Data showed that cotyledon explants were significantly superior in giving highest callus fresh weight with the mean of 0.1723 g. On the other hand, hypocotyl explants gave the lowest mean, reaching 0.1542 g.

scholarly journals Polpa de banana e sacarose no desenvolvimento in vitro de orquídeas

2021 ◽  
Vol 4 (2) ◽  
pp. 70-77
Author(s):  
Eliane Lima de = Aquino ◽  
◽  
Tarcísio Rangel do Couto ◽  
João Sebastião de Paula Araújo ◽  
◽  
...  
Keyword(s):  
Experimental Design ◽  
Seedling Growth ◽  
Culture Medium ◽  
In Vitro Cultivation ◽  
Fresh Weight ◽  
Randomized Experimental Design ◽  
Number Of Leaves ◽  
Weight Number

The objetive of this study was to evaluate the effects of adding two types of banana pulp, combined with varying concentrations of sacarose on the growth of Cattleya sp. plantlets. Hybrid LCTV-01 seedlings (Cattleya labiata rubra x Cattleya labiata semi alba) made to germinate in vitro were inoculated in an MS culture medium with half the concentration of nutrients and supplemented with 60 g.L-1 'maçã' or 'terra' banana pulp in addition to different concentrations of sacarose (10, 20 and 30 g.L-1. The entirely randomized experimental design was chosen, implemented in seven treatments, ten repetitions and eight seedlings per repetition. After 160 days of in vitro cultivation, variables of fresh weight, number of leaves, number of roots and length of the longest root were evaluated. It was found that the addition of banana pulp of any of the analyzed cultivars promoted better seedling growth. Additionally, the 20 g.L-1 sacarose concentration yielded better results for the analyzed variables.

scholarly journals How to produce large sized microtubers of potato cv. Desiree

2002 ◽  
Vol 8 (3-4) ◽  
Author(s):  
K. Magyar-Tábori ◽  
J. Dobránszky
Keyword(s):  
Size Distribution ◽  
Multiplication Rate ◽  
In Vitro Tuberization ◽  
Fresh Weight ◽  
Microtuber Production ◽  
High Sucrose ◽  
Very High

In vitro tuberization was induced on explants with different number of nodes layered on a medium with high sucrose (8%) content: 30, 15, 10, 7 and 6 explants per jar were cultured containing 1, 2, 3, 4 or 5 nodes, respectively. Microtubers developed were graded by their smallest diameter, and the number of tubers per jar, their size distribution, their fresh weight and the multiplication rate were recorded. The highest multiplication rate (1.98) was obtained for explants with 5 nodes. The size distribution of tubers was markedly affected by treatments. The majority of microtubers (49.4%) were 6-8 mm in the case of the smallest explants (with I node). When explants with 2 to 5 nodes were used, the most microtubers were 8-10 mm but with an increase of explant size, more and more microtubers were produced with larger diameter up to 16 mm and average fresh weight of tubers also increased with the increase of explant size. For the microtuber production of Desiree the use of explants with two nodes can be suggested because in this treatment the average fresh weight of microtubers was high enough (250 mg) and the number of large sized microtubers was very high (79% was larger than 6 mm and 53% was larger than 8 mm).

scholarly journals Culture medium for mint micropropagation in vitro

2020 ◽  
Author(s):  
N.A. Yegorova ◽  
◽  
M.S. Zagorskaya ◽  
O.V. Yakimova ◽  
◽  
...  
Keyword(s):  
In Vitro Propagation ◽  
Culture Medium ◽  
Medium Composition ◽  
Multiplication Rate ◽  
Ms Medium ◽  
Second Stage ◽  
Clonal Micropropagation ◽  
Propagation Technique

The influence of the culture medium composition on the development of explants at the second stage of clonal micropropagation of mint (Mentha canadensis L. K59(4n)) was studied in order to improve the in vitro propagation technique. It was shown that the maximum multiplication rate (11.5) was provided by MS medium supplemented with BAP (1.0 mg/L), IAA (0.5 mg/L) and 2% sucrose.

scholarly journals Análisis bioinformático de las rutas pks y fas en plantas y uso de inductores exógenos sobre la producción de acetogeninas en guanábana cultivada in vitro

2019 ◽  
pp. 19-28
Author(s):  
Sanjuana Sánchez-Ramos ◽  
Felipe Guadalupe Carrillo-Landell ◽  
Gustavo Cruz-Jimenez ◽  
Alan Alexander González-Ibarra
Keyword(s):  
Amino Acids ◽  
Metabolic Pathways ◽  
Fatty Acid Synthetase ◽  
Bioinformatic Analysis ◽  
Annona Muricata ◽  
Ex Vitro ◽  
Temporary Immersion ◽  
The Third ◽  
Analysis Methodology

Goals. To analyze the effect on the production of acetogenins of Annona muricata cultivated in vitro by means of Temporary Immersion Bioreactors (BITs) promoted by the use of exogenous inducers proposed from a bioinformatic analysis. Methodology. A bioinformatic analysis was carried out at the KEGG site of the metabolic pathways of polyketide synthetase (PKS) and fatty acid synthetase (FAS) plants from which acetogenins are derived. Five treatments were performed in the BITs with soursop explants; 1) BAP, 2) BAP + AAs 3) BAP + AAs + Putrescine, 4) BAP + IAA and 5) BAP + IAA + Citrate. BAP and IAA are plant hormones, AAs is a mixture of three ketogenic amino acids, Putrescine and Citrate are inducers of PKS and FAS. Contribution. The cultivation of soursop explants was monitored using BITs of the 5 treatments for 8 weeks without apparent contamination. Sprout observation started from week 6 in treatment 1 and 2 but not in 3 over 8 weeks, with putrescine being more than an inducer a stress factor for the explant as they became necrotic. Treatments 4 and 5 were only monitored until the third week and no information on sprouting was collected. Differences in the profile of acetogenins by HPLC-PDA were observed between soursop leaves to ex vitro and in vitro and between treatments 1, 2 and 3.

scholarly journals Multiplicação de bastão-do-imperador em resposta a concentrações de BAP e número de subcultivos

2016 ◽  
Vol 22 (1) ◽  
pp. 88
Author(s):  
Eder De Oliveira Santos ◽  
Antonio Anderson De Jesus Rodrigues ◽  
Esdras Rocha da Silva ◽  
Ana Cristina Portugal Pinto de Carvalho
Keyword(s):  
Experimental Design ◽  
Light Intensity ◽  
Analysis Of Variance ◽  
Culture Medium ◽  
Multiplication Rate ◽  
Commercial Cultivation ◽  
Growth Room ◽  
Tropical Flowers ◽  
Etlingera Elatior

The large ornamental potential of tropical flowers has stimulated the commercial cultivation of various species. Micropropagation is a viable alternate method of propagation, since it enables obtaining a higher number of seedlings with uniformity and pathogens free. The objective was to evaluate the in vitro multiplication rate of Etlingera elatior cv. Porcelana, using explants obtained from in vitro established seedling shoots, obtained from the 2nd subcultive. The explants were inoculated in MS culture medium containing different concentrations of BAP (0.0; 2.22; 4.44; 6.66; 8.88; and 11,10 μM), and the cultures maintained in a growth room with temperature 25.0 ± 2.0 °C under a photoperiod of 12 hours of light and light intensity of 30 μmol.m-2 s-1. The multiplication rate was monthly, according to the four subcultives, totaling 120 days. The experimental design was completely randomized, with four replications, analyzed in a factorial 4 x 6. The data were submitted to analysis of variance and regression. There were significant differences in subcultives and made for BAP concentrations used. For the first subcultive, the concentration of 2.22 μM of BAP afforded a rate of 4.06 sprouts per explant, already in the second and fourth subcultives, with the addition of cytokinin concentration was increased amount of sprouts reaching at a rate of 4.05 and 4.96 shoots/explant in the highest concentration of BAP. The results of the treatments evaluated indicate that the presence of BAP favored sprout emission. The concentrations of 2.22, 8.88 and 11.10 μM this cytokinin promoted the highest multiplication rates in the first, second and fourth subcultives, respectively.

scholarly journals 606 In Vitro Propagation of Some Strawberry Cultivars in Response to Kind and Concentration of Some Cytokinin Compounds

HortScience ◽  
2000 ◽  
Vol 35 (3) ◽  
pp. 501D-501
Author(s):  
M.H. Aboul-Nasr ◽  
S.Z. Elagamy ◽  
A.M. Kassim
Keyword(s):  
In Vitro Propagation ◽  
Callus Formation ◽  
Shoot Length ◽  
Control Treatment ◽  
Fresh Weight ◽  
Shoot Height ◽  
Murashige And Skoog Medium ◽  
Number Of Leaves ◽  
Strawberry Cultivars

Three strawberry cultivars were used in this study. Runners from the three cultivars were grown on Murashige and Skoog medium supplemented with benzylaminpurine or kinetin at four concentrations (2, 1, 0.5, and 0.25 mg·L-1 in addition to the control treatment). The use of cytokinin, regardless of type and concentration, promoted the explant proliferation, shoot height, number of leaves, and plantlet fresh weight. Callus formation was enhanced by BA application, especially with `Pajaro'. However, `Chandler' did not form at all using cytokinin. Produced plantlets had lower nutrient constituents (N, P, K, Ca, and Na) when grown on media containing cytokinin compared to the control. Based on these results, cytokinin is recommended to get more shoots per explant. Furthermore, using the lowest concentration (0.25 mg·L-1) will produce height proliferation, greater shoot length, and more leaves.

Sign in / Sign up

Export Citation Format

Share Document