scholarly journals Impact of boron and indium doping on the structural, electronic and optical properties of SnO2

2021 ◽  
Author(s):  
Petros-Panagis Filippatos ◽  
N Kelaidis ◽  
Maria Vasilopoulou ◽  
Dimitris Davazoglou ◽  
Alexander Chroneos
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Transition Metal Oxides ◽  
Density Functional ◽  
Tin Dioxide ◽  
Low Cost ◽  
Density Functional Theory Calculations ◽  
Electronic And Optical Properties ◽  
Indium Doping ◽  
Photocatalytic Applications

Abstract Tin dioxide (SnO2), due to its non-toxicity, high stability and electron transport capability represents one of the most utilized transition metal oxides in many optoelectronic devices such as photocatalytic devices, photovoltaics (PVs) and light-emitting diodes (LEDs). However, its wide bandgap reduces its charge carrier mobility and its photocatalytic activity. Doping with various elements is an efficient and low-cost way to decrease SnO2 band gap and maximize photocatalytic applications' potential. Here, we apply density functional theory calculations to examine the effect of p-type doping with B and In of SnO2 on its electronic and optical properties. Calculation predict the creation of shallow energy states in the band gap, near the valence band, when the dopant (B or In) is in interstitial position. In the case of substitutional doping, a significant decrease of the band gap is calculated. We also investigate the effect of doping on the surface sites of SnO2. We find that B incorporation in the (110) does not alter the gap while In causes a notable decrease. The present work highlights the significance of boron and indium doping in SnO2 both for solar cells and photocatalytic applications.

scholarly journals Impact of boron and indium doping on the structural, electronic and optical properties of SnO2

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Petros-Panagis Filippatos ◽  
Nikolaos Kelaidis ◽  
Maria Vasilopoulou ◽  
Dimitris Davazoglou ◽  
Alexander Chroneos
Keyword(s):  
Optical Properties ◽  
Dft Calculations ◽  
Band Gap ◽  
Density Functional ◽  
Tin Dioxide ◽  
Low Cost ◽  
Charge Carrier Mobility ◽  
Electronic And Optical Properties ◽  
Available Energy ◽  
Photocatalytic Applications

AbstractTin dioxide (SnO2), due to its non-toxicity, high stability and electron transport capability represents one of the most utilized metal oxides for many optoelectronic devices such as photocatalytic devices, photovoltaics (PVs) and light-emitting diodes (LEDs). Nevertheless, its wide bandgap reduces its charge carrier mobility and its photocatalytic activity. Doping with various elements is an efficient and low-cost way to decrease SnO2 band gap and maximize the potential for photocatalytic applications. Here, we apply density functional theory (DFT) calculations to examine the effect of p-type doping of SnO2 with boron (B) and indium (In) on its electronic and optical properties. DFT calculations predict the creation of available energy states near the conduction band, when the dopant (B or In) is in interstitial position. In the case of substitutional doping, a significant decrease of the band gap is calculated. We also investigate the effect of doping on the surface sites of SnO2. We find that B incorporation in the (110) does not alter the gap while In causes a considerable decrease. The present work highlights the significance of B and In doping in SnO2 both for solar cells and photocatalytic applications.

scholarly journals Electronic and optical properties of vacancy ordered double perovskites A2BX6 (A = Rb, Cs; B = Sn, Pd, Pt; and X = Cl, Br, I): a first principles study

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Faizan ◽  
K. C. Bhamu ◽  
Ghulam Murtaza ◽  
Xin He ◽  
Neeraj Kulhari ◽  
...  
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
First Principles ◽  
Density Functional ◽  
Perovskite Solar Cells ◽  
Dielectric Constants ◽  
Maximum Efficiency ◽  
Exchange Potential ◽  
Double Perovskites ◽  
Electronic And Optical Properties

AbstractThe highly successful PBE functional and the modified Becke–Johnson exchange potential were used to calculate the structural, electronic, and optical properties of the vacancy-ordered double perovskites A2BX6 (A = Rb, Cs; B = Sn, Pd, Pt; X = Cl, Br, and I) using the density functional theory, a first principles approach. The convex hull approach was used to check the thermodynamic stability of the compounds. The calculated parameters (lattice constants, band gap, and bond lengths) are in tune with the available experimental and theoretical results. The compounds, Rb2PdBr6 and Cs2PtI6, exhibit band gaps within the optimal range of 0.9–1.6 eV, required for the single-junction photovoltaic applications. The photovoltaic efficiency of the studied materials was assessed using the spectroscopic-limited-maximum-efficiency (SLME) metric as well as the optical properties. The ideal band gap, high dielectric constants, and optimum light absorption of these perovskites make them suitable for high performance single and multi-junction perovskite solar cells.

Structural Electronic and Optical Properties of MgO, CaO and SrO Binary Compounds: Comparison Study

2016 ◽  
Vol 257 ◽  
pp. 123-126 ◽  
Author(s):  
Salima Labidi ◽  
Jazia Zeroual ◽  
Malika Labidi ◽  
Kalthoum Klaa ◽  
Rachid Bensalem
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Density Functional ◽  
Local Density ◽  
Alternative Form ◽  
Full Potential ◽  
Generalized Gradient ◽  
Electronic And Optical Properties ◽  
Optical Dielectric Constant ◽  
Reported Data

First-principles calculations for electronic and optical properties under pressure effect of MgO, SrO and CaO compounds in the cubic structure, using a full relativistic version of the full-potential augmented plane-wave (FP-LAPW) method based on density functional theory, within the local density approximation (LDA) and the generalized gradient approximation (GGA), have been reported. Furthermore, band structure calculations have been investigated by the alternative form of GGA proposed by Engel and Vosko (GGA-EV) and modified by Becke-Johnson exchange correlation potential (MBJ-GGA). All calculated equilibrium lattices, bulk modulus and band gap at zero pressure are find in good agreement with the available reported data. The pressure dependence of band gap and the static optical dielectric constant are also investigated in this work.

Ab initio study of oxygen vacancy effects on electronic and optical properties of NiO

MRS Advances ◽  
2016 ◽  
Vol 1 (37) ◽  
pp. 2617-2622 ◽  
Author(s):  
John Petersen ◽  
Fidele Twagirayezu ◽  
Pablo D. Borges ◽  
Luisa Scolfaro ◽  
Wilhelmus Geerts
Keyword(s):  
Optical Properties ◽  
Density Functional ◽  
Local Density ◽  
Optical Transition ◽  
Energy Levels ◽  
Density Functional Theory Calculations ◽  
Local Density Of States ◽  
Functional Theory ◽  
Electronic And Optical Properties ◽  
O Vacancy

ABSTRACTDensity Functional Theory calculations of electronic and optical properties of NiO, with and without O vacancies, are the focus of this work. Two bands, one fully occupied and the other unoccupied, induced by an O vacancy, are found in the gap. These energy levels are identified and analyzed by means of a local density of states (LDOS) calculation, and notable crystal field splitting can be seen. The real and imaginary parts of the dielectric function are calculated, and an additional optical transition can be seen at lower energy, which can be attributed to the O vacancy induced state in the band gap.

Electronic structures and optical properties of cuprous oxide and hydroxide

2014 ◽  
Vol 1675 ◽  
pp. 185-190
Author(s):  
Yunguo Li ◽  
Cláudio M. Lousada ◽  
Pavel A. Korzhavyi
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Cuprous Oxide ◽  
Density Functional ◽  
Spent Nuclear Fuel ◽  
Energy Levels ◽  
Chemical Properties ◽  
Density Functional Theory Calculations ◽  
Hybrid Functional ◽  
Indirect Band Gap

ABSTRACTThe broad range of applications of copper, including areas such as electronics, fuel cells, and spent nuclear fuel disposal, require accurate description of the physical and chemical properties of copper compounds. Within some of these applications, cuprous hydroxide is a compound whose relevance has been recently discovered. Its existence in the solid-state form was recently reported. Experimental determination of its physical-chemical properties is challenging due to its instability and poop crystallinity. Within the framework of density functional theory calculations (DFT), we investigated the nature of bonding, electronic spectra, and optical properties of the cuprous oxide and cuprous hydroxide. It is found that the hybrid functional PBE0 can accurately describe the electronic structure and optical properties of these two copper(I) compounds. The calculated properties of cuprous oxide are in good agreement with the experimental data and other theoretical results. The structure of cuprous hydroxide can be deduced from that of cuprous oxide by substituting half Cu+ in Cu2O lattice with protons. Compared to Cu2O, the presence of hydrogen in CuOH has little effect on the ionic nature of Cu–O bonding, but lowers the energy levels of the occupied states. Thus, CuOH is calculated to have a wider indirect band gap of 2.73 eV compared with the Cu2O band gap of 2.17 eV.

scholarly journals Structural, Electronic and Optical Properties of Stanene Doped Beryllium: A First Principle Study

2021 ◽  
pp. 32-40
Author(s):  
L. S. Taura ◽  
Isah Abdulmalik ◽  
A. S. Gidado ◽  
Abdullahi Lawal
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Fermi Level ◽  
Band Gap ◽  
Density Functional ◽  
Earth Metal ◽  
Dirac Cone ◽  
Electronic Band ◽  
Electronic And Optical Properties ◽  
Optical Applications

Stanene is a 2D hexagonal layer of tin with exceptional electronic and optical properties. However, the semiconductor applications of stanene are limited due to its zero band-gap. However, doping stanene could lead to a band gap opening, which could be a promising material for electronic and optical applications. In this work, optimized structure, electronic band structure, real and imaginary parts of the frequency-dependent dielectric function, electron loss function, and refractive index of stanene substitutionally doped with alkaline earth metal (beryllium) were analyzed using density functional theory (DFT) calculations as implemented in the quantum espresso and yambo suites. A pure stanene has a zero band gap energy, but with the inclusion of spin-orbit coupling in the electronic calculation of pure stanene, the band-gap is observed to open up by 0.1eV. Doping stanene with beryllium opens the band-gap and shifts the Dirac cone from the Fermi level, the band gap opens by 0.25eV, 0.55eV, and 0.8eV when the concentration of Beryllium is 12.5%, 25%, and 37.5% respectively. The Dirac cone vanished when the concentration of the dopant was increased to 50%.  The Fermi level is shifted towards the valence band edge indicating a p-type material. The material absorption shows that SnBe absorption ranges in the visible to the ultraviolet region, The refractive index in stanene doped beryllium (SnBe) was found to be higher than that of pristine stanene, the highest refractive index was 9.2 at SnBe25%. In a nutshell, the results indicate that stanene can be a good material for electronic and optical applications if doped with beryllium.

scholarly journals First Principles Study on Electronic and Optical Properties of Quinary Copper-based Sulfides and Selenides Cu2HgGe(S1-xSex)4

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
Pham Dinh Khang ◽  
Vo Duy Dat ◽  
Dang Phuc Toan ◽  
Vu Van Tuan
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Density Functional ◽  
Hybrid Functional ◽  
Electron Hole ◽  
Functional Theory ◽  
Electronic And Optical Properties ◽  
Pair Separation ◽  
Electron Hole Pair ◽  
Band Transition

Electronic and optical properties of Cu2HgGe(S1-xSex)4 compounds (x = 0, 0.25, 0.5, 0.75, and 1) were revealed by density functional theory (DFT), in which the Heyd-Scuseria-Ernzerhof hybrid functional was used. Dependence of band gap on the Se constituent in Cu2HgGe(S1-xSex)4 was reported. The substitution of Se element basically cause a slightly lattice expansion and minor change of the band gap. Meanwhile, the overlap of Cu and S/Se states becomes more dense leading to better electron/hole pair separation and inter-band transition of photo-excited electrons. The Cu2HgGe(S0.75Se0.25)4 compound was predicted to be very promising absorber due to the low band gap, high absorption rate, and low reflectivity in the incoming light energy range from 0 eV to 2 eV.    

scholarly journals Electronic and Optical Properties of Sodium Niobate: A Density Functional Theory Study

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Daniel Fritsch
Keyword(s):  
Density Functional Theory ◽  
Optical Properties ◽  
Lead Zirconate Titanate ◽  
Density Functional ◽  
Room Temperature ◽  
Structural Phase ◽  
Density Functional Theory Calculations ◽  
Sodium Niobate ◽  
Functional Theory ◽  
Electronic And Optical Properties

In recent years, much effort has been devoted to replace the most commonly used piezoelectric ceramic lead zirconate titanate Pb[ZrxTi1−x]O3 (PZT) with a suitable lead-free alternative for memory or piezoelectric applications. One possible alternative to PZT is sodium niobate as it exhibits electrical and mechanical properties that make it an interesting material for technological applications. The high-temperature simple cubic perovskite structure undergoes a series of structural phase transitions with decreasing temperature. However, particularly the phases at room temperature and below are not yet fully characterised and understood. Here, we perform density functional theory calculations for the possible phases at room temperature and below and report on the structural, electronic, and optical properties of the different phases in comparison to experimental findings.

SiGe/h-BN heterostructure with inspired electronic and optical properties: a first-principles study

2016 ◽  
Vol 4 (42) ◽  
pp. 10082-10089 ◽  
Author(s):  
Xianping Chen ◽  
Xiang Sun ◽  
D. G. Yang ◽  
Ruishen Meng ◽  
Chunjian Tan ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Optical Properties ◽  
First Principles ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Electronic And Optical Properties ◽  
First Principles Study

The structure along with the electronic and optical properties of a SiGe/BN monolayer heterostructure were theoretically researched using density functional theory calculations.

Sign in / Sign up

Export Citation Format

Share Document