scholarly journals Model Test and Theoretical Analysis of New and Old Embankments Differential Settlement Considering Lateral Deformation

2021 ◽  
Author(s):  
Gao-hang Lv ◽  
Wei Cui ◽  
Shu Jian Wang
Keyword(s):  
Model Test ◽  
Calculation Method ◽  
Lateral Deformation ◽  
Low Degree ◽  
Deformation Law ◽  
Degree Of Consolidation ◽  
The Difference ◽  
The Stability ◽  
The One ◽  
Deformation Coefficient

Abstract In the embankment widening project, the new embankment will produce large deformation due to the low degree of consolidation, which will affect the stability of the embankment. Obtaining the settlement law of embankment is the premise to ensure the stability of the embankment. In this paper, the deformation law of the new embankment is studied through the embankment model test, and the settlement calculation method of the new embankment is proposed. The model test results show that the new and old embankments have a large settlement difference during the loading process, and the maximum settlement of the new embankment is twice that of the old embankment. The lateral deformation of the new embankment is directly proportional to the vertical deformation, sliding occurs under the ultimate load, and the bearing capacity is lost. Based on the one-dimensional calculation method, the lateral deformation coefficient is introduced, and the two-dimensional embankment settlement formula is obtained. The new embankment is meshed, and the deformation of each node is calculated by the formula, and the difference between the settlement and the model test data is 6.2%, which proves the feasibility and accuracy of the calculation method.

Use of a Lyophilized Reference Plasma to Compare Coagulation Test Procedures

1975 ◽  
Vol 34 (02) ◽  
pp. 426-444 ◽  
Author(s):  
J Kahan ◽  
I Nohén
Keyword(s):  
Oral Anticoagulant Therapy ◽  
Repeated Measurements ◽  
Test Procedures ◽  
Coagulation Activity ◽  
Close Relationship ◽  
Measured Activity ◽  
Test Materials ◽  
The Difference ◽  
The Stability ◽  
The One

SummaryIn 4 collaborative trials, involving a varying number of hospital laboratories in the Stockholm area, the coagulation activity of different test materials was estimated with the one-stage prothrombin tests routinely used in the laboratories, viz. Normotest, Simplastin-A and Thrombotest. The test materials included different batches of a lyophilized reference plasma, deep-frozen specimens of diluted and undiluted normal plasmas, and fresh and deep-frozen specimens from patients on long-term oral anticoagulant therapy.Although a close relationship was found between different methods, Simplastin-A gave consistently lower values than Normotest, the difference being proportional to the estimated activity. The discrepancy was of about the same magnitude on all the test materials, and was probably due to a divergence between the manufacturers’ procedures used to set “normal percentage activity”, as well as to a varying ratio of measured activity to plasma concentration. The extent of discrepancy may vary with the batch-to-batch variation of thromboplastin reagents.The close agreement between results obtained on different test materials suggests that the investigated reference plasma could be used to calibrate the examined thromboplastin reagents, and to compare the degree of hypocoagulability estimated by the examined PIVKA-insensitive thromboplastin reagents.The assigned coagulation activity of different batches of the reference plasma agreed closely with experimentally obtained values. The stability of supplied batches was satisfactory as judged from the reproducibility of repeated measurements. The variability of test procedures was approximately the same on different test materials.

New Boundaries, New Relationships

2020 ◽  
pp. 79-97
Author(s):  
LaTonya J. Trotter
Keyword(s):  
Registered Nurses ◽  
Nurse Practitioner ◽  
Power Relations ◽  
Medical Work ◽  
Nurses And Physicians ◽  
Signal Changes ◽  
The Difference ◽  
The Stability ◽  
The One ◽  
The Relationship

This chapter evaluates how the presence of the nurse practitioner (NP) does not just signal changes in nursing work; it portends changes in medical work. Although real tensions exist between nurses and physicians, broadly speaking, they have worked collegially alongside one another for well over a century. This collegiality has endured despite significant changes in what both physicians and nurses do for patients. Its endurance, however, has been predicated on the one thing that has not changed: the power relations between the two. It is the difference in authority, and not just the difference in work, that undergirds the stability of the relationship between the two professions. The NP threatens to disrupt that stability. When registered nurses (RNs) become NPs, they are not just learning new skills; they are crossing lines of authority that they had previously learned to treat as constitutive of their profession. The chapter then looks at the voices and experiences of the NPs of Forest Grove Elder Services. Their narrated and actual practices negotiated physician authority in very different ways.

scholarly journals Seismic analysis of the zaouiat ait mellal twin tunnels of Agadir motorway (Morocco)

2020 ◽  
Vol 150 ◽  
pp. 03001
Author(s):  
Abdelhay El Omari ◽  
Mimoun Chourak ◽  
Carlos Navvaro Ugena ◽  
Seif-Eddine Cherif ◽  
Mohamed Rougui ◽  
...  
Keyword(s):  
Seismic Analysis ◽  
Free Field ◽  
Bending Moment ◽  
Structural Elements ◽  
Underground Structures ◽  
Maximum Displacement ◽  
The Difference ◽  
The Stability ◽  
The One ◽  
Twin Tunnels

Underground structures, such as tunnels, are vital for ensuring all kinds of transportation; and being buried under the surface makes them exposed to soil dynamics. Added to the moderate seismic activity in Morocco, the stability of tunnels is put to the test. This paper examines the interaction between the ZAM (Zaouit Ait Mellal) twin tunnels between the cities of Marrakesh and Agadir, using the Difference Element Method provided by FLAC 2D software. The acceleration is introduced as the one related to the historic event of El centro 1940 with free-field boundary conditions in the numerical model, with three configurations: tunnel 1 without tunnel 2, tunnel 2 without tunnel 1 and tunnel 1 with tunnel 2. The results of the simulations indicate that the differences values of the maximum displacement, axial force and bending moment on structural elements are very noteworthy from the configuration of the tunnel (single) to the twin tunnels in order to prove the interaction between these latter under seismic loading.

scholarly journals Assessment of the stability of bat ectoparasite communities using a Principal Component Analysis (PCA) method

2019 ◽  
Vol 8 (1) ◽  
pp. 119-124
Author(s):  
Galina Anatolievna Fadeeva ◽  
Elena Evgenievna Boryakova
Keyword(s):  
Principal Component Analysis ◽  
Principal Component ◽  
Component Analysis ◽  
Parasite Communities ◽  
Parasitic System ◽  
Pca Method ◽  
The Difference ◽  
The Stability ◽  
The One

The paper deals with a research of epiparasite communities in native karst caves in the South of Nizhny Novgorod Region. Six species of bats such as Daubentons water bat, Brandts bat, whiskered bat, pond bat, northern bat and long-eared bat were examined. A Principal Component Analysis was used to identify factors influencing the composition of ectoparasites as well as the number and distribution of mites in mixed colonies of bats. As the cave and its inhabitants can be considered as a microbiotope, it is obvious that there are specific relations between inhabitants in caves. Special habitat conditions indirectly influence the parasitic systems developing there which are characterized by certain stability. Mann-Whitney U-test was used to estimate the difference between samples of animals from different habitats. Methods of nonparametric statistics didnt find significant distinctions by the hosts, years and biotopes, the bat colony and their ectoparasites can be estimated as a single complexly organized system, existing long in space and time. From all possible factorial space four factors have significant effect on systems. The contribution of the first and second factors is equal to 65% of variance (specificity of parasites to hosts and a factor of dominant species presence). In parasite communities of bats interrelations which cause successful existence of all types without the expressed competition are observed. Our results indicate a complex relationship between the parasites in the community on the one hand, and long-term existence of the community on the other hand. Each member of parasitic system has a position in factorial space. In parasite communities of bats we met only one factor-dependent species ( Spinturnix acuminatus, Sp. plecotinus, Leptotrombidium russicum ). Species that show moderate and positive, moderate and negative correlation dependence with several factors are found. For example, Spinturnix myoti , Sp. kolenatii , Macronyssus heteromorphus , etc. Heterogeneity of environmental impact on the parasitic systems which are formed in natural caves provides stability of bat parasite communities in general.

Structure, Stability and Water Adsorption on Ultra-Thin TiO2 Supported on TiN

2019 ◽  
Author(s):  
Jose Julio Gutierrez Moreno ◽  
Marco Fronzi ◽  
Pierre Lovera ◽  
alan O'Riordan ◽  
Mike J Ford ◽  
...  
Keyword(s):  
Density Functional ◽  
Water Adsorption ◽  
Chemical Potential ◽  
Energy Gap ◽  
Molecular Water ◽  
Structure Stability ◽  
Ambient Conditions ◽  
Rutile Structure ◽  
The Stability ◽  
The One

<p></p><p>Interfacial metal-oxide systems with ultrathin oxide layers are of high interest for their use in catalysis. In this study, we present a density functional theory (DFT) investigation of the structure of ultrathin rutile layers (one and two TiO<sub>2</sub> layers) supported on TiN and the stability of water on these interfacial structures. The rutile layers are stabilized on the TiN surface through the formation of interfacial Ti–O bonds. Charge transfer from the TiN substrate leads to the formation of reduced Ti<sup>3+</sup> cations in TiO<sub>2.</sub> The structure of the one-layer oxide slab is strongly distorted at the interface, while the thicker TiO<sub>2</sub> layer preserves the rutile structure. The energy cost for the formation of a single O vacancy in the one-layer oxide slab is only 0.5 eV with respect to the ideal interface. For the two-layer oxide slab, the introduction of several vacancies in an already non-stoichiometric system becomes progressively more favourable, which indicates the stability of the highly non-stoichiometric interfaces. Isolated water molecules dissociate when adsorbed at the TiO<sub>2</sub> layers. At higher coverages the preference is for molecular water adsorption. Our ab initio thermodynamics calculations show the fully water covered stoichiometric models as the most stable structure at typical ambient conditions. Interfacial models with multiple vacancies are most stable at low (reducing) oxygen chemical potential values. A water monolayer adsorbs dissociatively on the highly distorted 2-layer TiO<sub>1.75</sub>-TiN interface, where the Ti<sup>3+</sup> states lying above the top of the valence band contribute to a significant reduction of the energy gap compared to the stoichiometric TiO<sub>2</sub>-TiN model. Our results provide a guide for the design of novel interfacial systems containing ultrathin TiO<sub>2</sub> with potential application as photocatalytic water splitting devices.</p><p></p>

The Demand For Money in Pakistan: Reply (Notes and Comments)

1975 ◽  
Vol 14 (3) ◽  
pp. 370-375
Author(s):  
M. A. Akhtar
Keyword(s):  
Interest Rates ◽  
Money Demand ◽  
Strong Support ◽  
Physical Capital ◽  
Careful Examination ◽  
Demand For Money ◽  
Weak Support ◽  
Complementarity Hypothesis ◽  
The Difference ◽  
The One

I am grateful to Abe, Fry, Min, Vongvipanond, and Yu (hereafter re¬ferred to as AFMVY) [1] for obliging me to reconsider my article [2] on the demand for money in Pakistan. Upon careful examination, I find that the AFMVY results are, in parts, misleading and that, on the whole, they add very little to those provided in my study. Nevertheless, the present exercise as well as the one by AFMVY is useful in that it furnishes us with an opportunity to view some of the fundamental problems involved in an empi¬rical analysis of the demand for money function in Pakistan. Based on their elaborate critique, AFMVY reformulate the two hypo¬theses—the substitution hypothesis and the complementarity hypothesis— underlying my study and provide us with some alternative estimates of the demand for money in Pakistan. Briefly their results, like those in my study, indicate that income and interest rates are important in deter¬mining the demand for money. However, unlike my results, they also suggest that the price variable is a highly significant determinant of the money demand function. Furthermore, while I found only a weak support for the complementarity between money demand and physical capital, the results obtained by AFMVY appear to yield a strong support for that rela¬tionship.1 The difference in results is only a natural consequence of alter¬native specifications of the theory and, therefore, I propose to devote most of this reply to the criticisms raised by AFMVY and the resulting reformulation of the two mypotheses.

Effect of leakage and blockage on the acoustic behavior of particle filters

2019 ◽  
Vol 67 (6) ◽  
pp. 483-492
Author(s):  
Seonghyeon Baek ◽  
Iljae Lee
Keyword(s):  
Transfer Matrix ◽  
Particle Filters ◽  
Acoustic Analysis ◽  
Transmission Loss ◽  
One Dimensional ◽  
Filter System ◽  
The Difference ◽  
The One ◽  
Analytical Approaches ◽  
Good Agreement

The effects of leakage and blockage on the acoustic performance of particle filters have been examined by using one-dimensional acoustic analysis and experimental methods. First, the transfer matrix of a filter system connected to inlet and outlet pipes with conical sections is measured using a two-load method. Then, the transfer matrix of a particle filter only is extracted from the experiments by applying inverse matrices of the conical sections. In the analytical approaches, the one-dimensional acoustic model for the leakage between the filter and the housing is developed. The predicted transmission loss shows a good agreement with the experimental results. Compared to the baseline, the leakage between the filter and housing increases transmission loss at a certain frequency and its harmonics. In addition, the transmission loss for the system with a partially blocked filter is measured. The blockage of the filter also increases the transmission loss at higher frequencies. For the simplicity of experiments to identify the leakage and blockage, the reflection coefficients at the inlet of the filter system have been measured using two different downstream conditions: open pipe and highly absorptive terminations. The experiments show that with highly absorptive terminations, it is easier to see the difference between the baseline and the defects.

Development and Validation of Spectrophotometric and Liquid Chromatographic Methods for Estimation of Tigecycline in Injections

2020 ◽  
Vol 13 (5) ◽  
pp. 5148-5154
Author(s):  
Sagar Suman Panda ◽  
Ravi Kumar B.V.V.
Keyword(s):  
Area Under The Curve ◽  
Reversed Phase ◽  
Equal Concentration ◽  
Pharmaceutical Dosage Form ◽  
Liquid Chromatographic Method ◽  
Array Detection ◽  
The Difference ◽  
The One ◽  
Development And Validation ◽  
Liquid Chromatographic

Three new analytical methods were optimized and validated for the estimation of tigecycline (TGN) in its injection formulation. A difference UV spectroscopic, an area under the curve (AUC), and an ultrafast liquid chromatographic (UFLC) method were optimized for this purpose. The difference spectrophotometric method relied on the measurement of amplitude when equal concentration solutions of TGN in HCl are scanned against TGN in NaOH as reference. The measurements were done at 340 nm (maxima) and 410nm (minima). Further, the AUC under both the maxima and minima were measured at 335-345nm and 405-415nm, respectively. The liquid chromatographic method utilized a reversed-phase column (150mm×4.6mm, 5µm) with a mobile phase of methanol: 0.01M KH2PO4 buffer pH 3.5 (using orthophosphoric acid) in the ratio 80:20 %, v/v. The flow rate was 1.0ml/min, and diode array detection was done at 349nm. TGN eluted at 1.656min. All the methods were validated for linearity, precision, accuracy, stability, and robustness. The developed methods produced validation results within the satisfactory limits of ICH guidance. Further, these methods were applied to estimate the amount of TGN present in commercial lyophilized injection formulations, and the results were compared using the One-Way ANOVA test. Overall, the methods are rapid, simple, and reliable for routine quality control of TGN in the bulk and pharmaceutical dosage form. 

In the stability of paints and varnishes for protective and decorative wood finish

2016 ◽  
Author(s):  
Ю.И. Цой
Keyword(s):  
Organic Solvents ◽  
Evaluation Criteria ◽  
Ternary Systems ◽  
Solubility Parameters ◽  
Formaldehyde Resin ◽  
Film Forming ◽  
The Difference ◽  
Molecular Forces ◽  
The Stability ◽  
Thermodynamic Interaction

Задача получения однородного состава ЛКМ сводится к правильному выбору пленкообразователей и соответствующих растворителей и, в случае необходимости, разбавителей и добавок. На основе положений теории растворимости была проведена оценка совместимости компонентов и стабильности таких систем. Критериями оценки были приняты параметры растворимости и термодинамического взаимодействия. Исследовали совместимость алкидных лаков с аминоформальдегидными смолами в бутаноле, и результаты этих исследований представлены в треугольной фазовой диаграмме. Для оценки совместимости смол по результатам расчета параметров термодинамического взаимодействия были построены спинодали для тройных систем. Как показывает анализ результатов проведенных исследований, даже при большой разности ?? = |?12 – ?13| = 0,2 наблюдается небольшая область несовместимости. С уменьшением разности ?? область несовместимости сужается. При ?23 > ?с область несовместимости расширяется как для ? = 0,2, так и для ?? = 0,1 и ?? = 0. Таким образом, для таких систем на совместимость компонентов, в первую очередь, влияет их взаимодействие между собой – чем оно больше, тем лучше они совместимы. Проведенные исследования показали, что парциальные параметры растворимости, учитывающие природу когезионных сил, более объективно характеризуют растворимость пленкообразующих смол в органических растворителях, чем их общий параметр растворимости. Растворимость пленкообразующих алкидных и этерифицированных аминоформальдегидных смол в органических растворителях обусловлена термодинамическим взаимодействием молекулярных сил различной природы. Стабильность смеси алкидной и этерифицированной аминоформальдегидной смолы в бутаноле обусловлена в большей степени термодинамическим взаимодействием молекулярных сил; при этом степень бутанолизации меламиноформальдегидной смолы оказывает наибольшее влияние на стабильность cистемы. Проведенные исследования по стабильности лакокрасочных смесей из различных пленкообразующих смол на основе рассмотренных критериев оценки могут быть использованы для совершенствования технологии защитно-декоративной отделки древесины. The problem of obtaining a homogeneous composition of the coatings is reduced to the proper selection of film-forming agents, and diluent and, if appropriate, diluents and additives. On the basis of the theory of solubility, we have carried out the assessment of the compatibility of the components and stability of such systems. The evaluation criteria were adopted the parameters of the solubility and thermodynamic interaction. Researched the compatibility with alkyd varnishes aminoformaldehyde resin in butanol, and the results of these studies are presented in the triangular phase diagram. To evaluate the compatibility of the resins according to the results of calculation of thermodynamic parameters of interaction were built spinodal for ternary systems. As the analysis of the results of the studies, even when the difference ??|?12 – ?13| = 0,2 there is a small area of incompatibility. With the decrease of the difference ? ? region incompatibility narrows. When ?23> ?с region incompatibility extends to ?? = 0,2, and for ?? = 0.1 and ?? = 0. Thus, for such systems, compatibility of components, primarily, affects their interaction with each other – the further away it is, the better they are compatible. Studies have shown that the partial solubility parameters, which take into account the nature of cohesive forces, more objectively characterize the solubility of film-forming resins in organic solvents than their total solubility parameter. The solubility and film-forming aminoformaldehyde esterified alkyd resins in organic solvents due to thermodynamic interaction of molecular forces of different nature. Тhe stability of the mixture and aminoformaldehyde esterified alkyd resin in butanol is generated largely by thermodynamic forces of molecular interaction; the degree of butanolate melamine-formaldehyde resin has the greatest effect on the stability of the system. Conducted research on the stability of the paint mixtures of various film-forming resins on the basis of the evaluation criteria can be used to improve the technology of protective and decorative wood finish.

Managing the Era of Multi-Cultural Leadership

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Rahul ◽  
R. Ganesan
Keyword(s):  
Work Environment ◽  
Leadership Style ◽  
Work Experience ◽  
Cross Culture ◽  
Cultural Leadership ◽  
Team Members ◽  
Diverse Workforce ◽  
The Difference ◽  
The One ◽  
Global Arena

Leaders in the global arena are the one who face the challenges never seen before, while coordinating work and managing relationship between team members coming from varied ethnic groups. Globalization has undoubtedly opened up endless growth opportunities for both, businesses and individuals, by collaborating with each other, but with certain inherent challenges. These challenges are the difference in the cultural background of the team members, which gets predominantly reflected in their behavior at workplace too. The cultural differences exist primarily due to differences in shared values, which form the basis for difference in perception and practices of decision making by an individual (Hofstede, 1980). Juana Bordas has rightly described that any business that fails to adapt their leadership style aligning with multi-cultural approach will find it difficult to thrive in a more colorful world. Leadership style has witnessed various facets of changing work environment that has demanded from leaders to modify their approach to adapt along and be effective and survive in the ever-changing environment of business (Bordas,2007).A cross-culture leader plays a significant role in knitting the diverse workforce into an efficient team; which requires a leader to very well understand the various dimensions of culture. This understanding of the leader enables him to learn about blending of leadership styles to address the challenges of such work environment. This paper is an extended work on 'Leadership in Cross-Cultural Environment – A Comparison of Asian and Non-Asian Managers' (Rahul and Ganesan, 2015). The extended research study has identified that enhanced work experience of cross-culture leaders enables them in effective team management, than the rise in designation, as it results in creation of hierarchical distance between the leaders and subordinates.

Sign in / Sign up

Export Citation Format

Share Document