scholarly journals Seismic Evaluation of Self-Centering Bi-Rocking Walls via Micro Modeling of Rocking Joints: Locating the Rocking Section

2021 ◽  
Author(s):  
Vahid Broujerdian ◽  
Esmaeil Mohammadi Dehcheshmeh
Keyword(s):  
Ground Motions ◽  
Near Field ◽  
Time History ◽  
Comparative Investigation ◽  
Seismic Evaluation ◽  
Higher Modes ◽  
High Rise ◽  
The Moment ◽  
Nonlinear Time History ◽  
Rocking Walls

Abstract The rocking concrete shear wall is one of the new self-centering seismic systems applied in high-rise buildings. To reduce the effects of higher modes on base-rocking walls, the idea of using multiple rocking walls has been evolved. This paper presents a comparative investigation on the seismic performance of base-rocking and bi-rocking wall systems. To this aim, structures of 4-, 8-, 12-, 16-, and 20- stories have been evaluated subjected to three sets of seismic earthquake records including 22 Far Field (FF), 14 Near Field (NF) with pulse, and 14 Near Field (NF) no-pulse ground motions. The nonlinear time-history analyses were conducted in two directions using OpenSEES software. To determine the appropriate location of rocking section in bi-rocking walls, one-quarter (R2-M1), one-half (R2-M2), and three-quarter (R2-M3) models were examined. The obtained results revealed that R2-M3 model is not efficient in reducing the effects of higher modes. However, R2-M2 model in high-rise buildings under FF and NF-no-pulse records could be effective in decreasing the moment by a maximum of nearly 41% and the shears by a maximum of 25% and 18%, respectively. Furthermore, the results showed that bi-rocking walls could not be effective in reducing the influence of higher modes under NF-pulse ground motions. Generally, the residual drifts were negligible in all the rocking systems under study.

Seismic response analysis of steel–concrete hybrid wind turbine tower

2021 ◽  
pp. 107754632110075
Author(s):  
Junling Chen ◽  
Jinwei Li ◽  
Dawei Wang ◽  
Youquan Feng
Keyword(s):  
Wind Turbine ◽  
Response Spectrum ◽  
Ground Motions ◽  
Time History ◽  
Seismic Action ◽  
Response Spectrum Method ◽  
Spectrum Method ◽  
Wind Turbine Tower ◽  
Ground Types ◽  
Nonlinear Time History

The steel–concrete hybrid wind turbine tower is characterized by the concrete tubular segment at the lower part and the traditional steel tubular segment at the upper part. Because of the great change of mass and stiffness along the height of the tower at the connection of steel segment and concrete segment, its dynamic responses under seismic ground motions are significantly different from those of the traditional steel tubular wind turbine tower. Two detailed finite element models of a full steel tubular tower and a steel–concrete hybrid tower for 2.0 MW wind turbine built in the same wind farm are, respectively, developed by using the finite element software ABAQUS. The response spectrum method is applied to analyze the seismic action effects of these two towers under three different ground types. Three groups of ground motions corresponding to three ground types are used to analyze the dynamic response of the steel–concrete hybrid tower by the nonlinear time history method. The numerical results show that the seismic action effect by the response spectrum method is lower than those by the nonlinear time history method. And then it can be concluded that the response spectrum method is not suitable for calculating the seismic action effects of the steel–concrete hybrid tower directly and the time history analyses should be a necessary supplement for its seismic design. The first three modes have obvious contributions on the dynamic response of the steel–concrete hybrid tower.

Seismic Behavior of Curved Bridge in Mountain Area

2019 ◽  
Author(s):  
Shuichi Fujikura ◽  
Yuji Sakakibara ◽  
Minh Hai Nguyen ◽  
Akinori Nakajima
Keyword(s):  
Seismic Behavior ◽  
Near Field ◽  
Time History ◽  
Longitudinal Direction ◽  
Mountain Area ◽  
Curved Bridge ◽  
Horizontally Curved ◽  
The 2016 Kumamoto Earthquake ◽  
Post Impact ◽  
Nonlinear Time History

<p>The 2016 Kumamoto Earthquake occurred in central Kyushu, Japan, on April 14th with Mw 6.2 followed by the Mw 7.0 mainshock on April 16th. These earthquakes were mainly caused by the Futagawa fault and Hinagu fault where surface ruptures extended about 34 km long. Some of the bridges located in mountain area and close to the fault were damaged due to these near‐field earthquakes. Oginosaka Bridge is one of them and is a horizontally curved bridge with longitudinal and transverse slope, which is a feature of the bridges located in mountain area. The superstructure was rotated on plan and displaced transversely at both abutments to the opposite side, and there was an evidence of the deck‐abutment pounding in longitudinal direction. In order to investigate the seismic behavior of the curved bridge, nonlinear time‐history analyses including a deck‐abutment pounding interaction were carried out. The deck‐abutment pounding interaction considered in the analyses could capture the post‐impact response of the superstructure. The near‐field ground motions were used for the analyses. The analytical results showed that the curved bridge is susceptible to the deck rotation caused by pounding in longitudinal direction at the deck end under earthquake loading.</p>

Investigation of Damages in RC Frames Under Near Field Earthquakes Using a Damage Index

2016 ◽  
Vol 16 (02) ◽  
pp. 1450094 ◽  
Author(s):  
Seyed Morteza Zinati Yazdi ◽  
Mohammad Taghi Kazemi
Keyword(s):  
Near Field ◽  
Damage Index ◽  
Time History ◽  
General Rule ◽  
Nonlinear Time History Analysis ◽  
Far Field ◽  
Moment Frames ◽  
Moment Frame ◽  
Rc Frames ◽  
Nonlinear Time History

Heavy damages on structures caused by near field earthquakes in recent years has brought serious attention to this problem. An examination of previous records has shown significant differences for near field earthquakes, including a large energy pulse, unlike far field earthquakes. But as a general rule, the effects of near field earthquakes have been ignored in most building codes. The purpose of this paper is to investigate the effect of near field earthquakes on reinforced concrete (RC) moment frames. To achieve this goal, the Erduran damage index, an efficient way to calculate damage, was employed to analyze two 4- and 8-story RC moment frame buildings. The buildings with moderate and high ductility were designed by the strength criteria. Seven pairs of near field and far field earthquakes were scaled and used for dynamic nonlinear time history analysis. Using Erduran’s beam and column damage index, respectively, based on rotation and drift, the results from both near and far field earthquakes were compared. Moreover, for better assessment, 4-story buildings were evaluated from the performance based viewpoint of design. We observe from the results that most of the components of the structures under near field earthquakes sustained severe damages and in some cases even component failure. Components of the structures under near field earthquakes suffered from 30% more of damage, on average, than that under far field earthquakes.

A spectral-acceleration-based combination-type earthquake intensity measure for high-rise stack-like structures

2019 ◽  
Vol 23 (7) ◽  
pp. 1350-1366 ◽  
Author(s):  
Yikun Qiu ◽  
Changdong Zhou ◽  
Siha A ◽  
Guangwei Zhang
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Spectral Acceleration ◽  
Intensity Measure ◽  
Earthquake Intensity ◽  
Intensity Measures ◽  
Higher Modes ◽  
High Rise ◽  
Near Fault ◽  
Period Elongation

Ground motion intensity measures are of great importance for the seismic design of structures. A well-chosen intensity measure will reduce the detailed ground motion record selection effort for the nonlinear dynamic structural analyses. In this article, a spectral-acceleration-based combination-type earthquake intensity measure is presented. This intensity measure considers the higher modes effect and period elongation effect due to nonlinear deformation at the same time. The modal mass participation factors are determined to take weighting coefficients and the product of elastic first-mode period T1 and a constant C is expressed to represent the elongated period. Therefore, the proposed intensity measure is a combination of earthquake ground motion characteristics, elastic structural responses, higher modes participation, and the period elongation effect due to inelastic structural behaviors. Four three-dimensional models of reinforced concrete stack-like structures including a 240 m-high chimney, a 180 m-high chimney, a 120 m-high chimney, and a 42.3 m-high water tower are established and analyzed in ABAQUS to investigate the correlation between the intensity measure and the maximum curvatures under 44 far-field ground motions and 28 near-fault ground motions with a pulse-like effect. With the optimal vibration modes and the proper period elongation coefficient, the efficiency of the introduced intensity measure is compared with the other 15 intensity measures. The results indicate that the proposed intensity measure is believed to be a good choice for high-rise stack-like structures, especially under the near-fault ground motions with pulse-like effect.

DAMAGE EVOLUTION SPECTRA FOR SEISMIC ANALYSIS OF HIGH-RISE BUILDINGS

2012 ◽  
Vol 06 (03) ◽  
pp. 1250021
Author(s):  
Y. B. HO ◽  
J. S. KUANG
Keyword(s):  
Damage Evolution ◽  
Seismic Analysis ◽  
Ground Motions ◽  
Time History ◽  
Tall Buildings ◽  
Response Spectra ◽  
Seismic Damage ◽  
Analysis And Design ◽  
High Rise ◽  
Earthquake Ground Motions

Seismic response spectra are amongst one of the most important tools for characterizing earthquake ground motions. In design practice, the response spectra are presented without including any load history, hence the nonlinear analysis of structures based solely on conventional earthquake response spectra is theoretically unsound, particularly for long-period or vertically irregular high-rise buildings. In this paper, a concept of seismic damage evolution is introduced and the method of analysis for characterizing the process of seismic damage to structures under earthquakes is presented. Seismic damage evolution spectra for analysis and design of high-rise buildings are then developed as an effective means of describing and simplifying earthquake ground motions. These spectra are shown to be very useful in selecting the ground motion-time history and, particularly, validating the equivalent static-load analysis and design of high-rise buildings under near-fault pulse-like ground motions. Case studies of the seismic inelastic performance of two vertically irregular, tall buildings are presented considering the seismic damage evolution spectra.

Influence of Earthquake Attack Angle on Seismic Demands for Structures under Bi-Directional Ground Motions

2011 ◽  
Vol 255-260 ◽  
pp. 2330-2334 ◽  
Author(s):  
Yu Zhang ◽  
Quan Wang Li ◽  
Jian Sheng Fan
Keyword(s):  
Seismic Design ◽  
Ground Motions ◽  
Time History ◽  
Earthquake Excitation ◽  
Seismic Demands ◽  
3 Dimensional ◽  
Nonlinear Time History Analyses ◽  
Modification Factor ◽  
Structural Responses ◽  
Nonlinear Time History

The earthquake may attack the structural building from any angle, but in current seismic design codes, this type of uncertainty is seldom accounted. The uncertainty associated with the direction of earthquake excitation was considered in this paper, and its effect on structural responses was investigated. For this purpose, a simple 3-dimensional model with symmetric plan was established, which had fundamental periods ranged from 0.1s to 5.0s, and was subjected to a set of 30 ground motion pairs for which both linear and nonlinear time history analyses were performed. Analyzing results showed that, on average, the elastic roof acceleration is 32% underestimated, and the inelastic roof displacement is 18% underestimated if the variation of earthquake excitation direction is not consider. Recognizing this, a modification factor for the seismic demand was proposed thorough a statistical analysis, which guarantees a probability of 95% design safety

scholarly journals Isolating system using U Shaped steel damper

2021 ◽  
Vol 309 ◽  
pp. 01136
Author(s):  
Siripuram Vamshisheela ◽  
Atulkumar Manchalwar
Keyword(s):  
Base Isolation ◽  
Ground Motions ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Base Shear ◽  
Energy Device ◽  
History Analysis ◽  
Structural Responses ◽  
Nonlinear Time History ◽  
Story Building

In this work the performance of U-Shaped Steel Isolator is evaluated for a 5-story building subjected to seismic and blast vibrations. The structure is analysed using SAP 2000 software and a nonlinear time history analysis is carried out. The effectiveness of using base isolation is studied by comparing the structural responses of the building with isolator and without isolator and noticeable difference was observed. As the U-Shaped isolator absorbs the energy in all directions, it effectively controls the structural responses. In this study, the building is subjected to four different seismic and four different blast induced ground motions. It was observed that by the use of supplementary energy device there is reduction in top story acceleration, base shear and less deformation in the structure. This study concludes that the use of isolator has been effective in minimizing structural responses.

scholarly journals A Wavelet-based Approach for Truncating Pulse-like Records

2021 ◽  
Author(s):  
Vicky Dimakopoulou ◽  
Michalis Fragiadakis ◽  
Ioannis Taflampas
Keyword(s):  
Ground Motion ◽  
Near Field ◽  
Time History ◽  
Response Spectra ◽  
Degree Of Freedom ◽  
Seismic Performance Assessment ◽  
Analysis And Design ◽  
Nonlinear Time History Analyses ◽  
Ground Motion Records ◽  
Nonlinear Time History

Abstract The seismic performance assessment of structures using truncated pulse-like ground motion records is discussed. It is shown that it is possible to truncate pulse-like signals using a novel wavelet-based definition that identifies the duration of the predominant velocity pulse. The truncated time history can efficiently reproduce the increased seismic demand that near-field records typically produce. Substituting the original ground motion with the truncated signal, significantly accelerates structural analysis and design. The truncated signal is the part of the original accelerogram that coincides with the duration of the predominant pulse, which is identified using a wavelet-based procedure, previously proposed by the authors. Elastic and inelastic response spectra and nonlinear time history analyses for SDOF (single-degree-of-freedom) systems are first studied. Subsequently a nine-storey steel frame is examined in order to demonstrate the performance of the proposed approach on a multiple-degree-of-freedom system. The proposed approach is found very efficient for pulse-like ground motions, while it is also sufficient for many records that are not characterized as such.

Sign in / Sign up

Export Citation Format

Share Document