Structural and Electrical Dynamics of a Grating-Patterned Triboelectric Energy Harvester with Stick-Slip Oscillation and Magnetic Bistability

2021 ◽  
Author(s):  
Huai Zhao ◽  
Huajiang Ouyang
Keyword(s):  
Energy Harvesting ◽  
Structural Dynamics ◽  
Output Voltage ◽  
Energy Harvester ◽  
Sliding Mode ◽  
Research Work ◽  
Stick Slip ◽  
Patterned Films ◽  
Bistable Mechanism ◽  
Triboelectric Energy Harvesting

Abstract The majority of research work on triboelectric energy harvesting is on material science, manufacturing and electric circuit design. There is a lack of in-depth research into structural dynamics which is crucial for power generation in triboelectric energy harvesting. In this paper, a novel triboelectric energy harvester with a compact structure working in sliding mode is developed, which is in the form of a casing and an oscillator inside. Unlike most sliding-mode harvesters using single-unit films, the proposed harvester utilizes grating-patterned films which are much more efficient. A bistable mechanism consisting of two pairs of magnets is employed for broadening the frequency bandwidth. A theoretical model is established for the harvester, which couples the structural dynamics domain and electrical dynamics domain. This paper presents the first study about the nonlinear structural dynamics of a triboelectric energy harvester with grating-patterned films, which is also the first triboelectric energy harvester integrating grating-patterned films with a bistable magnetic system for power performance enhancement. Theoretical studies are carried out from the perspectives of both structural and electrical dynamics. A comparison between the coupled model and uncoupled model reveals that the electrostatic force between the electrodes can be neglected. Great differences in structural response and electrical output are found between a velocity-dependent model and Coulomb’s model for modelling the friction in the harvester. The bistable mechanism can effectively improve the output voltage under low-frequency excitations. Additionally, the output voltage can also be obviously enhanced through increasing the number of the hollowed-out units of the grating-patterned films, which also results in a slight decrease of the optimal load resistance of the harvester. These findings enable innovative designs for triboelectric energy harvesters and provide fabrication guidelines in practical applications.

Broadband Rotational Energy Harvesting Using Micro Energy Harvester

2018 ◽  
Author(s):  
Jui-Ta Chien ◽  
Yung-Hsing Fu ◽  
Chao-Ting Chen ◽  
Shun-Chiu Lin ◽  
Yi-Chung Shu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Rotational Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Rotational Excitation ◽  
Rotating Speed ◽  
Piezoelectric Energy

This paper proposes a broadband rotational energy harvesting setup by using micro piezoelectric energy harvester (PEH). When driven in different rotating speed, the PEH can output relatively high power which exhibits the phenomenon of frequency up-conversion transforming the low frequency of rotation into the high frequency of resonant vibration. It aims to power self-powered devices used in the applications, like smart tires, smart bearings, and health monitoring sensors on rotational machines. Through the excitation of the rotary magnetic repulsion, the cantilever beam presents periodically damped oscillation. Under the rotational excitation, the maximum output voltage and power of PEH with optimal impedance is 28.2 Vpp and 663 μW, respectively. The output performance of the same energy harvester driven in ordinary vibrational based excitation is compared with rotational oscillation under open circuit condition. The maximum output voltage under 2.5g acceleration level of vibration is 27.54 Vpp while the peak output voltage of 36.5 Vpp in rotational excitation (in 265 rpm).

scholarly journals FINITE ELEMENT SIMULATION OF MEMS PIEZOELECTRIC ENERGY SCAVENGER BASED ON PZT THIN FILM

2019 ◽  
Vol 20 (1) ◽  
pp. 90-99
Author(s):  
Aliza Aini Md Ralib ◽  
Nur Wafa Asyiqin Zulfakher ◽  
Rosminazuin Ab Rahim ◽  
Nor Farahidah Za'bah ◽  
Noor Hazrin Hany Mohamad Hanif
Keyword(s):  
Thin Film ◽  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
The World

Vibration energy harvesting has been progressively developed in the advancement of technology and widely used by a lot of researchers around the world. There is a very high demand for energy scavenging around the world due to it being cheaper in price, possibly miniaturized within a system, long lasting, and environmentally friendly. The conventional battery is hazardous to the environment and has a shorter operating lifespan. Therefore, ambient vibration energy serves as an alternative that can replace the battery because it can be integrated and compatible to micro-electromechanical systems. This paper presents the design and analysis of a MEMS piezoelectric energy harvester, which is a vibration energy harvesting type. The energy harvester was formed using Lead Zicronate Titanate (PZT-5A) as the piezoelectric thin film, silicon as the substrate layer and structural steel as the electrode layer. The resonance frequency will provide the maximum output power, maximum output voltage and maximum displacement of vibration. The operating mode also plays an important role to generate larger output voltage with less displacement of cantilever. Some designs also have been studied by varying height and length of piezoelectric materials. Hence, this project will demonstrate the simulation of a MEMS piezoelectric device for a low power electronic performance. Simulation results show PZT-5A piezoelectric energy with a length of 31 mm and height of 0.16 mm generates maximum output voltage of 7.435 V and maximum output power of 2.30 mW at the resonance frequency of 40 Hz. ABSTRAK: Penuaian tenaga getaran telah berkembang secara pesat dalam kemajuan teknologi dan telah digunakan secara meluas oleh ramai penyelidik di seluruh dunia. Terdapat permintaan yang sangat tinggi di seluruh dunia terhadap penuaian tenaga kerana harganya yang lebih murah, bersaiz kecil dalam satu sistem, tahan lama dan mesra alam. Manakala, bateri konvensional adalah berbahaya bagi alam sekitar dan mempunyai jangka hayat yang lebih pendek. Oleh itu, getaran tenaga dari persekitaran lebih sesuai sebagai alternatif kepada bateri kerana ia mudah diintegrasikan dan serasi dengan sistem mikroelektromekanikal. Kertas kerja ini  membentangkan reka bentuk dan analisis tenaga piezoelektrik MEMS iaitu salah satu jenis penuaian tenaga getaran. Penuai tenaga ini dibentuk menggunakan Lead Zicronate Titanate (PZT-5A) sebagai lapisan filem tipis piezoelektrik, silikon sebagai lapisan substrat dan keluli struktur sebagai lapisan elektrod. Frekuensi resonans akan memberikan hasil tenaga maksima, voltan tenaga maksima dan getaran jarak maksima. Mod pengendalian juga memainkan peranan penting bagi menghasilkan tenaga yang lebih besar. Reka bentuk yang mempunyai ketinggian dan panjang berlainan juga telah diuji dengan menggunakan bahan piezoelektrik yang sama. Oleh itu, projek ini akan menghasilkan simulasi piezoelektrik MEMS yang sesuai digunakan bagi alat elektronik berkuasa rendah. Hasil simulasi menunjukkan dengan panjang 31 mm dan ketinggian 0.16 mm, piezoelektrik PZT ini menghasilkan voltan maksima sebanyak 7.435 V dan tenaga output maksima 2.30 mW pada frekuensi resonans 40 Hz.

scholarly journals Performance Evaluation of a Piezoelectric Energy Harvester Based on Flag-Flutter

Micromachines ◽  
2020 ◽  
Vol 11 (10) ◽  
pp. 933 ◽  
Author(s):  
Hassan Elahi ◽  
Marco Eugeni ◽  
Federico Fune ◽  
Luca Lampani ◽  
Franco Mastroddi ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Wind Tunnel ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Research Work ◽  
Maximum Output ◽  
Operational Environment ◽  
Subsonic Wind Tunnel ◽  
Piezoelectric Energy

In the last few decades, piezoelectric (PZT) materials have played a vital role in the aerospace industry because of their energy harvesting capability. PZT energy harvesters (PEH) absorb the energy from an operational environment and can transform it into useful energy to drive nano/micro-electronic components. In this research work, a PEH based on the flag-flutter mechanism is presented. This mechanism is based on fluid-structure interaction (FSI). The flag is subjected to the axial airflow in the subsonic wind tunnel. The performance evaluation of the harvester and aeroelastic analysis is investigated numerically and experimentally. A novel solution is presented to extract energy from Limit Cycle Oscillations (LCOs) phenomenon by means of PZT transduction. The PZT patch absorbs the flow-induced structural vibrations and transforms it into electrical energy. Furthermore, the optimal resistance and length of the flag is predicted to maximize the energy harvesting. Different configurations of flag i.e., with Aluminium (Al) patch and PZT patch for flutter mode vibration mode are studied numerically and experimentally. The bifurcation diagram is constructed for the experimental campaign for the flutter instability of a cantilevered flag in subsonic wind-tunnel. Moreover, the flutter boundary conditions are analysed for reduced critical velocity and frequency. The designed PZT energy harvester via flag-flutter mechanism is suitable for energy harvesting in aerospace engineering applications to drive wireless sensors. The maximum output power that can be generated from the designed harvester is 6.72 mW and the optimal resistance is predicted to be 0.33 MΩ.

Theoretical and experimental studies of a piezoelectric ring energy harvester

2019 ◽  
Vol 30 (7) ◽  
pp. 998-1009 ◽  
Author(s):  
XF Zhang ◽  
HS Tzou
Keyword(s):  
Energy Harvesting ◽  
Power Output ◽  
Output Voltage ◽  
Laboratory Experiments ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Experimental Studies ◽  
Design Parameters ◽  
Resistive Load ◽  
Practical Applications

Based on the electromechanical coupling of piezoelectricity, a piezoelectric ring energy harvester is designed and tested in this study, such that the harvester can be used to power electric devices in the closed-circuit condition. Output energies across the external resistive load are evaluated when the ring energy harvester is subjected to harmonic excitations, and various design parameters are discussed to maximize the power output. In order to validate the theoretical energy harvesting results, laboratory experiments are conducted. Comparing experiment results with theoretical ones, the errors between them are under 10% for the output voltage. Laboratory experiments demonstrate that the ring energy harvester is workable in practical applications.

scholarly journals Response Analysis of the Tristable Energy Harvester with an Uncertain Parameter

2021 ◽  
Vol 11 (21) ◽  
pp. 9979
Author(s):  
Ying Zhang ◽  
Xiaxia Duan ◽  
Yu Shi ◽  
Xiaole Yue
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Nonlinear Coefficient ◽  
Response Analysis ◽  
Slight Variation ◽  
Uncertain Parameters ◽  
Chaotic Motions ◽  
Energy Harvesting System ◽  
Nonlinear Energy

In the stage of modelling, measuring, mechanical processing and manufacturing of the nonlinear energy harvesting system, deviations and errors of system parameters are inevitable. Even slight variation of key parameters may have a significant influence on the output voltages, especially for the multi-stable nonlinear case. Therefore, the investigation of dynamic behaviors for the tristable energy harvesting system with uncertain parameters is of important value both for research and application. In this paper, the uncertainty of a tristable piezoelectric vibration energy harvester with a random coefficient ahead of the nonlinear term is studied. By using the Chebyshev polynomial approximation, this tristable energy harvesting system is first reduced into an equivalent deterministic form, the ensemble mean responses of which are derived to exhibit the stochastic behaviors. The periodic and chaotic motions, bifurcations and crises under different conditions are analyzed. The results show that the output voltage is sensitive to the uncertainty of the nonlinear coefficient, which leads to unstable behavior around the bifurcation and crisis points particularly. Exploring the influence pattern of uncertain parameters on the output voltage and avoiding the unstable parameter intervals are essential for optimizing the structure. It can further improve the efficiency of the nonlinear energy harvesting system.

scholarly journals Modeling and analysis of the friction in a nonlinear sliding-mode triboelectric energy harvester

2021 ◽  
Author(s):  
Dongguo Tan ◽  
Jiaxi Zhou ◽  
Kai Wang ◽  
Changqi Cai ◽  
Daolin Xu
Keyword(s):  
Energy Harvesting ◽  
Dynamic Response ◽  
Coulomb Friction ◽  
Energy Harvester ◽  
Sliding Mode ◽  
Low Frequency ◽  
Friction Model ◽  
Modeling And Analysis ◽  
Coulomb Friction Model ◽  
Engineering Practices

Abstract Friction plays a pivotal role in the sliding-mode triboelectric energy harvester (TEH), which not only enables the charge transfer between two dielectrics, but also influences the energy harvesting performance by affecting the dynamic response of the TEH. How to evaluate the effects of the friction on TEHs is important for optimizing TEHs in engineering practices. In order to analyze the effects of the friction on the dynamic response and evaluate the energy harvesting performance of TEHs, the paper models the friction of a devised nonlinear TEH based on the Coulomb friction model and the Macro-slip friction theory. The TEH equips a pair of magnets, rendering a switching between the bistability and the monostability by tuning the distance between two magnets. The dynamic model of the nonlinear TEH is established by the extended Hamilton principle. The effects of the friction in sliding-mode TEH are dissected in detail. The influences of parameters on both the mechanical and electrical responses are also systemically studied, to explore an optimal energy harvesting performance in the low-frequency range. This work provides a guideline for designing and accurately analyzing a sliding-mode TEH.

scholarly journals Hybrid sliding PID controller for torsional vibrations mitigation in rotary drilling systems

2021 ◽  
Vol 22 (1) ◽  
pp. 146
Author(s):  
Chafiaa Mendil ◽  
Madjid Kidouche ◽  
Mohamed Zinelabidine Doghmane
Keyword(s):  
Pid Controller ◽  
Sliding Mode ◽  
Research Work ◽  
Drilling Process ◽  
Torsional Vibrations ◽  
Rotary Drilling ◽  
Stick Slip ◽  
Dynamical Interaction ◽  
Drilling System ◽  
Slip Phenomenon

During the drilling process, the drilling system devices can be exposed to several types of phenomena incited by lateral, axial, and torsional vibrations. The latter can lead to severe damages if they are not efficiently controlled and quickly mitigated. This research work is focused on the torsional vibrations, which are stimulated by the nonlinear dynamical interaction between the geological rocks and the drill bit. Wherein, a model with three degrees of freedom was designed to demonstrate the severity of the stick-slip phenomenon as consequence of torsional vibrations. The main objective of this study was to design a robust controller based on hybridizing a conventional PID controller with sliding mode approach in order to mitigate rapidly the torsional vibrations. Moreover, a comparative study between PI, PID and sliding mode controllers allowed us to emphasize the effectiveness of the new hybrid controller and improve the drilling system performances. Furthermore, the chattering phenomenon in the sliding surface was overcome by using the saturation function rather than the sign function. The obtained results proved the usefulness of the proposed controller in suppressing the stick-slip phenomenon for smart industrial drilling systems.

scholarly journals Investigation of Piezoelectric Energy Harvesting via Nonlinear Friction-Induced Vibration

2020 ◽  
Vol 2020 ◽  
pp. 1-22
Author(s):  
D. W. Wang ◽  
M. X. Liu ◽  
X. Wu ◽  
W. J. Qian ◽  
Q. Ma ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Energy Harvesting ◽  
Output Voltage ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Complex Eigenvalue ◽  
Transient Dynamic Analysis ◽  
Stick Slip ◽  
Piezoelectric Energy ◽  
Friction Induced Vibration

In this work, piezoelectric energy harvesting (PEH) performance via friction-induced vibration (FIV) is studied numerically. A nonlinear two-degree-of-freedom friction system (mass-on-belt) with piezoelectric elements, which simultaneously considers the stick-slip motion, model coupling instability, separation, and reattachment between the mass and belt, is proposed. Both complex eigenvalue analyses and transient dynamic analysis of this nonlinear system are carried out. Results show that it is feasible to convert FIV energy to electrical energy when the friction system is operating in the unstable vibration region. There exists a critical friction coefficient (μc) for the system to generate FIV and output visible voltage. The friction coefficient plays a significant role in affecting the dynamics and PEH performance of the friction system. The friction system is able to generate stronger vibration and higher voltage in the case that both the kinetic friction coefficient and static friction coefficient are larger than μc. Moreover, it is seen that the separation behavior between contact pair can result in overestimating or underestimating the vibration magnitude and output voltage amplitude, and the overestimate or underestimate phenomenon is determined by the located range of friction coefficient. Furthermore, it is confirmed that an appropriate value of external resistance is beneficial for the friction system to achieve the highest output voltage. The obtained results will be beneficial for the design of PEH device by means of FIV.

Simply supported FPEDs connected by springs for broadband energy harvesting

2020 ◽  
Vol 64 (1-4) ◽  
pp. 201-210
Author(s):  
Yoshikazu Tanaka ◽  
Satoru Odake ◽  
Jun Miyake ◽  
Hidemi Mutsuda ◽  
Atanas A. Popov ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Evaluation Method ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Functional Materials ◽  
Vibration Energy ◽  
Theoretical Evaluation ◽  
Vibration Energy Harvester ◽  
Polyvinylidene Difluoride ◽  
Simply Supported

Energy harvesting methods that use functional materials have attracted interest because they can take advantage of an abundant but underutilized energy source. Most vibration energy harvester designs operate most effectively around their resonant frequency. However, in practice, the frequency band for ambient vibrational energy is typically broad. The development of technologies for broadband energy harvesting is therefore desirable. The authors previously proposed an energy harvester, called a flexible piezoelectric device (FPED), that consists of a piezoelectric film (polyvinylidene difluoride) and a soft material, such as silicon rubber or polyethylene terephthalate. The authors also proposed a system based on FPEDs for broadband energy harvesting. The system consisted of cantilevered FPEDs, with each FPED connected via a spring. Simply supported FPEDs also have potential for broadband energy harvesting, and here, a theoretical evaluation method is proposed for such a system. Experiments are conducted to validate the derived model.

Sign in / Sign up

Export Citation Format

Share Document