scholarly journals Molecular Dynamics Simulations on the Thermal Effect of Interfacial Friction During Asperity Shearing

2021 ◽  
Author(s):  
Zhaoxun Yuan ◽  
Junxian Zhao ◽  
Shiping Huang
Keyword(s):  
Crystal Structure ◽  
Potential Energy ◽  
Thermal Effect ◽  
Friction Force ◽  
Rotation Angle ◽  
Atomic Scale ◽  
Interfacial Friction ◽  
Average Temperature ◽  
Thermal Potential ◽  
Dynamics Simulations

Abstract To explore the thermal effect of interfacial friction at the nano/microscale, a solid-solid contact model of a rough surface with a single peak was established to research single-crystal Fe. The friction characteristics, stress distributions, temperature changes, and energy changes under different indentation depths and lattice orientations during the shearing process were analyzed. From the perspective of temperature and energy, the mechanism of the thermal effect was revealed. The relationship between the friction force, temperature, and energy at the atomic scale was clarified. The results showed that the temperature of the asperities gradually increased during the shearing process, and a stress concentration formed in the shearing zone. After contact, the asperities had undergone unrecoverable plastic deformation, and there was wear at the contact interface accompanied by the loss of atoms from the asperity. At each indentation depth, as the rotation angle of the crystal increased, the friction force, average temperature, and the sum of the changes in thermal kinetic and thermal potential energy all first increased and then decreased; the trends of the three parameters changing with the rotation angle of the crystal were consistent. The average decreases in the friction force, average temperature, and the sum of the changes in thermal kinetic and thermal potential energy were 52.47%, 30.91%, and 56.75%, respectively, for a crystal structure with a rotation angle of 45° compared to a crystal structure with a rotation angle of 0°. The methods used in this study provide a reference for the design of frictional pairs and the reduction of the thermal effect of interfacial friction.

Structure and migration of planar defects in crystals observed in atomic scale

1978 ◽  
Vol 36 (1) ◽  
pp. 284-285 ◽  
Author(s):  
H. Hashimoto ◽  
Y. Sugimoto ◽  
Y. Takai ◽  
H. Endoh
Keyword(s):  
Electron Microscope ◽  
Rotation Angle ◽  
Crystal Surface ◽  
Electron Gun ◽  
Atomic Scale ◽  
Present Observation ◽  
Twist Boundary ◽  
Optical Magnification ◽  
Zinc Crystal ◽  
And Migration

As was demonstrated by the present authors that atomic structure of simple crystal can be photographed by the conventional 100 kV electron microscope adjusted at “aberration free focus (AFF)” condition. In order to operate the microscope at AFF condition effectively, highly stabilized electron beams with small energy spread and small beam divergence are necessary. In the present observation, a 120 kV electron microscope with LaB6 electron gun was used. The most of the images were taken with the direct electron optical magnification of 1.3 million times and then magnified photographically.1. Twist boundary of ZnSFig. 1 is the image of wurtzite single crystal with twist boundary grown on the surface of zinc crystal by the reaction of sulphur vapour of 1540 Torr at 500°C. Crystal surface is parallel to (00.1) plane and electron beam is incident along the axis normal to the crystal surface. In the twist boundary there is a dislocation net work between two perfect crystals with a certain rotation angle.

Active Learning Accelerates Ab Initio Molecular Dynamics on Pericyclic Reactive Energy Surfaces

2020 ◽  
Author(s):  
Shi Jun Ang ◽  
Wujie Wang ◽  
Daniel Schwalbe-Koda ◽  
Simon Axelrod ◽  
Rafael Gomez-Bombarelli
Keyword(s):  
Molecular Dynamics ◽  
Potential Energy ◽  
Transition State ◽  
Potential Energy Surface ◽  
Ab Initio ◽  
Energy Surface ◽  
Computational Cost ◽  
Reactive Trajectories ◽  
Dynamics Simulations ◽  
Energy Surfaces

<div>Modeling dynamical effects in chemical reactions, such as post-transition state bifurcation, requires <i>ab initio</i> molecular dynamics simulations due to the breakdown of simpler static models like transition state theory. However, these simulations tend to be restricted to lower-accuracy electronic structure methods and scarce sampling because of their high computational cost. Here, we report the use of statistical learning to accelerate reactive molecular dynamics simulations by combining high-throughput ab initio calculations, graph-convolution interatomic potentials and active learning. This pipeline was demonstrated on an ambimodal trispericyclic reaction involving 8,8-dicyanoheptafulvene and 6,6-dimethylfulvene. With a dataset size of approximately</div><div>31,000 M062X/def2-SVP quantum mechanical calculations, the computational cost of exploring the reactive potential energy surface was reduced by an order of magnitude. Thousands of virtually costless picosecond-long reactive trajectories suggest that post-transition state bifurcation plays a minor role for the reaction in vacuum. Furthermore, a transfer-learning strategy effectively upgraded the potential energy surface to higher</div><div>levels of theory ((SMD-)M06-2X/def2-TZVPD in vacuum and three other solvents, as well as the more accurate DLPNO-DSD-PBEP86 D3BJ/def2-TZVPD) using about 10% additional calculations for each surface. Since the larger basis set and the dynamic correlation capture intramolecular non-covalent interactions more accurately, they uncover longer lifetimes for the charge-separated intermediate on the more accurate potential energy surfaces. The character of the intermediate switches from entropic to thermodynamic upon including implicit solvation effects, with lifetimes increasing with solvent polarity. Analysis of 2,000 reactive trajectories on the chloroform PES shows a qualitative agreement with the experimentally-reported periselectivity for this reaction. This overall approach is broadly applicable and opens a door to the study of dynamical effects in larger, previously-intractable reactive systems.</div>

scholarly journals Combined Use of Structure Analysis, Studies of Molecular Association in Solution, and Molecular Modelling to Understand the Different Propensities of Dihydroxybenzoic Acids to Form Solid Phases

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 734
Author(s):  
Aija Trimdale ◽  
Anatoly Mishnev ◽  
Agris Bērziņš
Keyword(s):  
Crystal Structure ◽  
Molecular Dynamics ◽  
Molecular Dynamics Simulations ◽  
Structure Analysis ◽  
Crystal Structure Analysis ◽  
Molecular Association ◽  
Hydroxyl Groups ◽  
Solid Phases ◽  
Solvent Molecules ◽  
Dynamics Simulations

The arrangement of hydroxyl groups in the benzene ring has a significant effect on the propensity of dihydroxybenzoic acids (diOHBAs) to form different solid phases when crystallized from solution. All six diOHBAs were categorized into distinctive groups according to the solid phases obtained when crystallized from selected solvents. A combined study using crystal structure and molecule electrostatic potential surface analysis, as well as an exploration of molecular association in solution using spectroscopic methods and molecular dynamics simulations were used to determine the possible mechanism of how the location of the phenolic hydroxyl groups affect the diversity of solid phases formed by the diOHBAs. The crystal structure analysis showed that classical carboxylic acid homodimers and ring-like hydrogen bond motifs consisting of six diOHBA molecules are prominently present in almost all analyzed crystal structures. Both experimental spectroscopic investigations and molecular dynamics simulations indicated that the extent of intramolecular bonding between carboxyl and hydroxyl groups in solution has the most significant impact on the solid phases formed by the diOHBAs. Additionally, the extent of hydrogen bonding with solvent molecules and the mean lifetime of solute–solvent associates formed by diOHBAs and 2-propanol were also investigated.

scholarly journals Local structure and distortions of mixed methane-carbon dioxide hydrates

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Bernadette R. Cladek ◽  
S. Michelle Everett ◽  
Marshall T. McDonnell ◽  
Matthew G. Tucker ◽  
David J. Keffer ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Exchange Process ◽  
Carbon Dioxide Sequestration ◽  
Distribution Functions ◽  
Atomic Scale ◽  
Mixed Gas ◽  
Pure Compounds ◽  
Dynamics Simulations ◽  
Pair Distribution Functions ◽  
Methane Carbon

AbstractA vast source of methane is found in gas hydrate deposits, which form naturally dispersed throughout ocean sediments and arctic permafrost. Methane may be obtained from hydrates by exchange with hydrocarbon byproduct carbon dioxide. It is imperative for the development of safe methane extraction and carbon dioxide sequestration to understand how methane and carbon dioxide co-occupy the same hydrate structure. Pair distribution functions (PDFs) provide atomic-scale structural insight into intermolecular interactions in methane and carbon dioxide hydrates. We present experimental neutron PDFs of methane, carbon dioxide and mixed methane-carbon dioxide hydrates at 10 K analyzed with complementing classical molecular dynamics simulations and Reverse Monte Carlo fitting. Mixed hydrate, which forms during the exchange process, is more locally disordered than methane or carbon dioxide hydrates. The behavior of mixed gas species cannot be interpolated from properties of pure compounds, and PDF measurements provide important understanding of how the guest composition impacts overall order in the hydrate structure.

WHICH IS THE PROTON-SHUTTLE IN ISOXANTHOPTERIN DEAMINASE? QM/MM MD UNDERSTANDING

2013 ◽  
Vol 12 (08) ◽  
pp. 1341002 ◽  
Author(s):  
XIN ZHANG ◽  
MING LEI
Keyword(s):  
Crystal Structure ◽  
Molecular Dynamics ◽  
Hydrogen Bonds ◽  
Proton Transfer ◽  
Glutamic Acid ◽  
Active Site ◽  
Nucleophilic Attack ◽  
Zinc Ions ◽  
Initial Model ◽  
Dynamics Simulations

The deamination process of isoxanthopterin catalyzed by isoxanthopterin deaminase was determined using the combined QM(PM3)/MM molecular dynamics simulations. In this paper, the updated PM3 parameters were employed for zinc ions and the initial model was built up based on the crystal structure. Proton transfer and following steps have been investigated in two paths: Asp336 and His285 serve as the proton shuttle, respectively. Our simulations showed that His285 is more effective than Aap336 in proton transfer for deamination of isoxanthopterin. As hydrogen bonds between the substrate and surrounding residues play a key role in nucleophilic attack, we suggested mutating Thr195 to glutamic acid, which could enhance the hydrogen bonds and help isoxanthopterin get close to the active site. The simulations which change the substrate to pterin 6-carboxylate also performed for comparison. Our results provide reference for understanding of the mechanism of deaminase and for enhancing the deamination rate of isoxanthopterin deaminase.

Crystal structure of the wild-type and D30A mutant thioredoxin h of Chlamydomonas reinhardtii and implications for the catalytic mechanism

2001 ◽  
Vol 359 (1) ◽  
pp. 65-75 ◽  
Author(s):  
Valeria MENCHISE ◽  
Catherine CORBIER ◽  
Claude DIDIERJEAN ◽  
Michele SAVIANO ◽  
Ettore BENEDETTI ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Proton Transfer ◽  
Chlamydomonas Reinhardtii ◽  
Catalytic Mechanism ◽  
Structural Data ◽  
Careful Analysis ◽  
Wild Type ◽  
Thioredoxin H ◽  
Dynamics Simulations

Thioredoxins are ubiquitous proteins which catalyse the reduction of disulphide bridges on target proteins. The catalytic mechanism proceeds via a mixed disulphide intermediate whose breakdown should be enhanced by the involvement of a conserved buried residue, Asp-30, as a base catalyst towards residue Cys-39. We report here the crystal structure of wild-type and D30A mutant thioredoxin h from Chlamydomonas reinhardtii, which constitutes the first crystal structure of a cytosolic thioredoxin isolated from a eukaryotic plant organism. The role of residue Asp-30 in catalysis has been revisited since the distance between the carboxylate OD1 of Asp-30 and the sulphur SG of Cys-39 is too great to support the hypothesis of direct proton transfer. A careful analysis of all available crystal structures reveals that the relative positioning of residues Asp-30 and Cys-39 as well as hydrophobic contacts in the vicinity of residue Asp-30 do not allow a conformational change sufficient to bring the two residues close enough for a direct proton transfer. This suggests that protonation/deprotonation of Cys-39 should be mediated by a water molecule. Molecular-dynamics simulations, carried out either in vacuo or in water, as well as proton-inventory experiments, support this hypothesis. The results are discussed with respect to biochemical and structural data.

Sign in / Sign up

Export Citation Format

Share Document