scholarly journals An Experimental Study of Heat and Mass Transfer in a Falling Liquid Film Evaporation into a Crossflow of Neutral Gas

2020 ◽  
Vol 7 (1) ◽  
pp. F30-F38
Author(s):  
V. K. Lukashov ◽  
Y. V. Kostiuchenko ◽  
S. V. Timofeev ◽  
M. Ochowiak
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Flow Rate ◽  
Liquid Flow Rate ◽  
Heated Surface ◽  
Mass Transfer Process ◽  
Transfer Coefficients ◽  
Average Heat ◽  
Neutral Gas

The work is devoted to the study of heat and mass transfer in a liquid film flowing down on a heated surface under conditions of evaporation into a crossflow of a gas neutral with respect to the liquid. The work aimed to experimentally determine the average heat transfer coefficients from a heated surface to the film, heat transfer and mass transfer from the film to the gas flow and to establish their dependence on the input parameters of the heat and mass transfer process. To achieve this goal, an experimental setup was created, and a research technique was developed based on the proposed mathematical model of the heat and mass transfer process. The results of the study showed that the dependences of the average heat and mass transfer coefficients on the initial liquid flow rate are extreme with the minimum values of these coefficients at the liquid flow rate, which corresponds to the critical value of the Reynolds criterion Re l cr ≈ 500, which indicates a transition from the laminar falling films to turbulent mode under the considered conditions. The dependences of the heat and mass transfer coefficients on other process parameters for both modes of film falling are established. A generalization of the experimental data made it possible to obtain empirical equations for calculating these coefficients. Keywords: heat and mass transfer, cross flow, film apparatus, heat and mass return coefficient, neutral gas.

Heat Transfer on Nanofluid Flow With Homogeneous–Heterogeneous Reactions and Internal Heat Generation

2014 ◽  
Vol 136 (12) ◽  
Author(s):  
Raj Nandkeolyar ◽  
Peri K. Kameswaran ◽  
Sachin Shaw ◽  
Precious Sibanda
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Generation ◽  
Internal Heat ◽  
Internal Heat Generation ◽  
Heterogeneous Reactions ◽  
Transfer Coefficients ◽  
Transfer Characteristics ◽  
Fluid Properties

We investigated heat and mass transfer on water based nanofluid due to the combined effects of homogeneous–heterogeneous reactions, an external magnetic field and internal heat generation. The flow is generated by the movement of a linearly stretched surface, and the nanofluid contains nanoparticles of copper and gold. Exact solutions of the transformed model equations were obtained in terms of hypergeometric functions. To gain more insights regarding subtle impact of fluid and material parameters on the heat and mass transfer characteristics, and the fluid properties, the equations were further solved numerically using the matlab bvp4c solver. The similarities and differences in the behavior, including the heat and mass transfer characteristics, of the copper–water and gold–water nanofluids with respect to changes in the flow parameters were investigated. Finally, we obtained the numerical values of the skin friction and heat transfer coefficients.

The Experimental Investigation of Steam Condensation With Non-Condensable Gas Under Natural Convection

2018 ◽  
Author(s):  
Xizhen Ma ◽  
Wen Fu ◽  
Haijun Jia ◽  
Peiyue Li ◽  
Jun Li
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
High Pressure ◽  
Natural Convection ◽  
Heat And Mass Transfer ◽  
Vertical Wall ◽  
Experimental System ◽  
Steam Condensation ◽  
Transfer Coefficients ◽  
Calculation Results

The non-condensable gas is used to keep the pressure stable in the steam-gas pressurizer. The processes of heat and mass transfer during steam condensation in the presence of non-condensable gas play an important role and the thermal hydraulic characteristics in the pressurizer is particularly complicated due to the non-condensable gas. The effects of non-condensable gas on the process of heat and mass transfer during steam condensation were experimental investigated. A steam condensation experimental system under high pressure and natural convection was built and nitrogen was chosen in the experiments. The steam and nitrogen were considered in thermal equilibrium and shared the same temperature in the vessel under natural convection. In the experiments, the factors, for instance, pressure, mass fraction of nitrogen, subcooling of wall and the distribution of nitrogen in the steam, had been taken into account. The rate of heat transfer of steam condensation on the vertical wall with nitrogen was obtained and the heat transfer coefficients were also calculated. The characteristics curve of heat and mass transfer during steam condensation with non-condensable gas under high pressure were obtained and an empirical correlation was introduced to calculated to heat transfer coefficient of steam condensation with nitrogen which the calculation results showed great agreement with the experimental data.

Heat and Mass Transfer With Liquid Evaporation Into a Turbulent Air Stream

1986 ◽  
Vol 108 (1) ◽  
pp. 4-8 ◽  
Author(s):  
T. Kumada ◽  
T. Hirota ◽  
N. Tamura ◽  
R. Ishiguro
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Turbulent Heat ◽  
Transfer Coefficients ◽  
Enhancement Of Heat Transfer ◽  
Heat Transfer Coefficients ◽  
Air Stream ◽  
Liquid Evaporation ◽  
Experimental Errors

Some of the previously reported heat transfer coefficients with evaporation are fairly large as compared with those of a dry body under similar hydrodynamic conditions. In order to clarify this curious enhancement of heat transfer, a method of error evaluation was developed and applied to correct the experimental errors in the recently reported results. An experimental study was also made on turbulent heat and mass transfer of air flowing over a water surface. The present and the previously reported experimental results revealed that the heat transfer coefficient with evaporation agrees with that of a dry body without evaporation, within experimental error, if the erroneous heat inputs into the liquid are properly corrected according to the proposed method.

Numerical Study on Heat and Mass Transfer of Plate Falling Film Absorber with Wire-Meshed Fins

2012 ◽  
Vol 204-208 ◽  
pp. 4305-4314
Author(s):  
Jing Jing Zhang ◽  
Dan Dan Zhao ◽  
Lu Chun Wan ◽  
Bao Huai Zhang ◽  
Ya Ping Chen
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Heat And Mass Transfer ◽  
Absorption Rate ◽  
Numerical Study ◽  
Mass Transfer Process ◽  
Falling Film ◽  
Better Than

A mathematical model of heat and mass transfer process in plate falling film absorber with wire-meshed fins was developed. The model could predict temperature and concentration distribution as well as the solution side heat transfer coefficient and the absorption rate. The results verify that heat and mass transfer performance of the plate falling film absorber with wire-meshed fins is better than the past absorber. Compared with the plate falling film absorber without fins, heat transfer coefficient of the absorber in this article increases 1.06 times and the absorption rate increases 2.32 times.

scholarly journals Thermal effects of high energy and ultrafast lasers

2015 ◽  
Author(s):  
◽  
Nazia Afrin
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Transport ◽  
Phonon Scattering ◽  
Heated Surface ◽  
High Energy ◽  
Electron Interaction ◽  
Energy Laser ◽  
High Energy Laser

Heat transfer describes the exchange of thermal energy, between physical systems depending on the temperature and pressure, by dissipating heat. The fundamental modes of heat transfer are conduction or diffusion, convection and radiation. Heat and mass transfer are kinetic processes that may occur and be studied separately or jointly. Studying them apart is simpler, but both processes are modeled by similar mathematical equation in the case of diffusion and convection. There are complex problems where heat and mass transfer processes are combined with chemical reactions, as in combustion. The resulting behavior of heat transport in microscale will be very different from macroscale heat transfer based on the averages taken over hundreds of thousands of grains (in space) and collision (in time). From the microscopic point of view, the process of heat transport is governed by phonon-electron interaction in metallic films and by phonon scattering in dielectric films, insulators and semi-conductors. For extremely heated surfaces by high energy laser pulse, it is very difficult to measure temperature of flux at the heated surface because of the unendurable capacity of the conventional sensors. Laser is the tool of choice when drill holes ranging in diameter from several millimeters to less than one micro-meter. Instead of having advanced melting and resolidification modeling process recently, the inherent uncertainties of the input parameters can directly cause unstable characteristics of the output results which means the parametric uncertainties may influence the characteristics of the phase change processes (melting and resolidification) which will affect the predictions of interfacial properties i.e., temperature, velocity and mainly the location of solid-liquid interface. All of those processes can be considered under high energy laser interaction with materials.

scholarly journals Heat and mass transfer in the process of heat treatment and drying of natural leather with the convective method of energy supply

2021 ◽  
Vol 66 (1) ◽  
pp. 84-92
Author(s):  
A. O. Ol’shanskii ◽  
A. M. Gusarov ◽  
S. V. Zhernosek
Keyword(s):  
Heat Transfer ◽  
Heat Treatment ◽  
Mass Transfer ◽  
Heat Conduction ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Analytical Solutions ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Unsteady Heat Conduction

In the work, the authors investigated the possibility of using the results of analytical solutions of the linear differential equations of unsteady heat conduction with constant heat transfer coefficients to calculate the temperature of the material during heat treatment of leathers. Heat treatment of natural leathers as heat-sensitive materials is carried out under mild temperature conditions and high air moisture contents, the temperature does not undergo significant changes, and the heat transfer coefficients change almost linearly. When using analytical solutions, the authors made the assumptions that for small temperature gradients over the cross section of a thin body, the thermal transfer of matter can be neglected and for values of the heat and mass transfer Biot criteria less than unity, the main factor, limiting heat and mass transfer, is the interaction of the evaporation surface of the body with the environment; so, in solving the differential heat equation we can restrict ourselves to one first member of an infinite series. In this case, a piecewise stepwise approximation of all thermophysical characteristics with constant values of these coefficients at the calculated time intervals was applied, which made it possible to take into account the change in the transfer coefficients throughout the entire heat treatment process. Processing of experimental data showed that in low-intensity processes with reliable values of the transfer coefficients, it is possible to use the results of solutions of differential equations of unsteady heat conduction in heat transfer calculations. The results of the study of heat transfer during drying of leather confirm the laws of temperature change established experimentally. Together with experimental studies of drying processes, analytical studies are of great practical importance in the development of new methods for calculating heat and mass transfer in wet bodies.

Nanofluid Heat and Mass Transfer in a Deformable and Peristaltic Pump

2019 ◽  
Vol 8 (8) ◽  
pp. 1632-1639
Author(s):  
Aamir Ali ◽  
Y. Ali ◽  
D.N. Khan Marwat ◽  
M. Awais
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Surface Deformation ◽  
Wave Number ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Flow And Heat Transfer ◽  
Diffusion Parameters ◽  
Peristaltic Movement

Flow heat and mass transfer in a deformable channel of peristaltically moving walls is investigated in this paper. Moreover, the channel is filled with nanofluids. The purpose of this study is to examine the combined effects of surface deformation and peristaltic movement of the walls on the nanofluid flow in a channel. We have considered the effects of nanofluid in the peristaltically deformable porous channel whose walls are contracting or expanding in the normal direction. Nanofluids have been used to enhance the thermo-physical properties of fluids such as thermal diffusivity, thermal conductivity and convective heat transfer coefficients on flow and heat transfer. The analytic solution of the problem have been presented. We have analyzed the effects of different involved parameters such as Reynolds number, surface deformation parameter, Prandtl number, wave number, Brownian and thermophoretic diffusion parameters and Schmidt number on the velocity profile, the temperature profile, pressure distribution and the concentration profile with the help of graphs. The results are shown graphically and discussed physically. It is observed that the deformation increases the axial velocity and temperature of the fluid.

Enhancement of Combined Heat and Mass Transfer in a Vertical-Tube Heat and Mass Exchanger

1986 ◽  
Vol 108 (1) ◽  
pp. 70-75 ◽  
Author(s):  
R. L. Webb ◽  
H. Perez-Blanco
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Mass Transfer ◽  
Water Film ◽  
Vertical Tube ◽  
Transfer Coefficients ◽  
Interface Heat Transfer ◽  
Friction Performance ◽  
Predicted Values

This paper studies enhancement of heat and mass transfer between a countercurrent, gravity-drained water film and air flowing in a vertical tube. The enhancement technique employed is spaced, transverse wires placed in the air boundary layer, near the air-water interface. Heat transfer correlations for turbulent, single-phase heat transfer in pipes having wall-attached spaced ribs are used to select the preferred wire diameter, and to predict the gas phase heat and mass transfer coefficients. Tests were run with two different radial placements of the rib roughness: (1) at the free surface of the liquid film, and (2) the base of the roughness displaced 0.51 mm into the air flow. The authors hypothesize that the best heat/mass transfer and friction performance will be obtained with the roughness at the surface of the water film. Experiments conducted with both roughness placements show that the authors’ hypothesis is correct. The measured heat/mass transfer enhancement agreed very closely with the predicted values. A unique feature of the enhancement concept is that it does not require surface wetting of the enhancement device to provide enhancement.

scholarly journals Characteristics of supercritical heat transfer during filmboiling of nanofluids on a vertical heated wall

2018 ◽  
pp. 29-35
Author(s):  
А. Avramenko ◽  
M. Kovetskaya ◽  
A. Tyrinov ◽  
Yu. Kovetska
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Mathematical Model ◽  
Mass Transfer ◽  
Heat Flux ◽  
High Temperature ◽  
Heat And Mass Transfer ◽  
Heated Surface ◽  
Heated Wall ◽  
Film Boiling

Nanofluid using for intensification of heat transfer during boiling are analyzed. The using boiling nanofluids for cooling high-temperature surfaces allows significantly intensify heat transfer process by increasing the heat transfer coefficient of a nanofluid in comparison with a pure liquid. The properties of nanoparticles, their concentration in the liquid, the underheating of the liquid to the saturation temperature have significant effect on the rate of heat transfer during boiling of the nanofluid. Increasing critical heat flux during boiling of nanofluids is associated with the formation of deposition layer of nanoparticles on heated surface, which contributes changing in the microcharacteristics of heat exchange surface. An increase in the critical heat flux during boiling of nanofluids is associated with the formation of a layer of deposition of nanoparticles on the surface, which contributes to a change in the microcharacteristics of the heat transfer of the surface. Mathematical model and results of calculation of film boiling characteristics of nanofluid on vertical heated wall are presented. It is shown that the greatest influence on the processes of heat and mass transfer during film boiling of the nanofluid is exerted by wall overheating, the ratio of temperature and Brownian diffusion and the concentration of nanoparticles in the liquid. The mathematical model does not take into account the effect changing structure of the heated surface on heat transfer processes but it allows to evaluate the effect of various thermophysical parameters on intensity of deposition of nanoparticles on heated wall. The obtained results allow to evaluate the effect of nanofluid physical properties on heat and mass transfer at cooling of high-temperature surfaces. The using nanofluids as cooling liquids for heat transfer equipment in the regime of supercritical heat transfer promotes an increase in heat transfer and accelerates the cooling process of high-temperature surfaces. Because of low thermal conductivity of vapor in comparison with the thermal conductivity of the liquid, an increase in the concentration of nanoparticles in the vapor contributes to greater growth in heat transfer in the case of supercritical heat transfer.

Sign in / Sign up

Export Citation Format

Share Document