PHYSICO-CHEMICAL PARAMETERS APPLY TO ANALYSIS OF DRINKING WATER IN NANDED DISTRICT: MAHARASHTRA.

2017 ◽  
Vol 5 (2) ◽  
pp. 2589-2592
Author(s):  
MaheshSakharam Bachewar ◽  
◽  
PathanAhemad Mahebubsab. ◽  
Keyword(s):  
Drinking Water ◽  
Chemical Parameters ◽  
Physico Chemical

scholarly journals Application of Inorganic Fertilizers and Organic Manures on the Production of Autotrophic Plankton in Madhupur Tract Soil Contained Miniature Tank

2017 ◽  
Vol 10 (1) ◽  
pp. 9-14
Author(s):  
ME Huda ◽  
MR Nabi
Keyword(s):  
Drinking Water ◽  
Physicochemical Parameters ◽  
Water Hardness ◽  
Chemical Parameters ◽  
Average Water Temperature ◽  
Organic Manures ◽  
Physico Chemical ◽  
Water Ph ◽  
Average Water ◽  
Domestic Use

Appropriate fertilizer and their impact on physico-chemical parameters of water and productivity is very important for aquaculture and ecology. Optimum fertilizer dose can help in fish farmer as well as aquaculture sector. From the study it was found that the total physicochemical parameters of water were suitable for aquaculture, drinking water, irrigation and domestic use. The average water temperature was 26.45±2.75oC; 26.50±3.24oC; 25.83±4.08oC; 26.57±3.02oC and 26.53±2.93oC for MCRT-1 to 5 gradually. Water pH in an average was 7.37±0.61; 7.44±0.55; 7.25±0.58; 7.33±0.54 and 7.47±0.49 for Minature Circular Research Tank (MCRT)-1 to 5 respectively. Average water DO were 6.98±1.05 mgl-1; 6.75±1.53 mgl-1; 6.90±1.64 mgl-1; 6.59±1.19mgl-1 and 6.77±1.60mgl-1 for MCRT-1 to 5 respectively. Average water hardness were 71.88 ± 20.47 mgl-1; 60.5 ±2 1.25 mgl-1; 83.38 ± 23.39 mgl-1; 59.13 ± 25.57 mgl-1 and 52.63 ± 7.92 mgl-1 for MCRT-1 to 5 gradually. Average water total phosphorus were 0.77 ± 0.18 mgl-1; 0.83 ± 0.19 mgl-1; 0.78 ± 0.21 mgl-1; 0.84 ± 0.17 mgl-1 and 0.84 ± 0.16 mgl-1 for MCRT-1 to 5 gradually. From planktonic study it was found that the highest phytoplankton and Zooplankton were in MCRT-3. Phytoplanktons were under 27 no. of genera. Their groups were Cyanophyceae, Chlorophyceae, Bacillariophyceae, Euglenophyceae and Hepatecae.Zooplankton were five major taxa and they were Protozoa, Rotifera, Cladocera, Copepod and Ostracoda respectively.J. Environ. Sci. & Natural Resources, 10(1): 9-14 2017

Study of Physico-chemical Parameters of Drinking Water of Bhopal city with Reference to Health Impacts

2006 ◽  
Vol 1 (1) ◽  
pp. 95-99 ◽  
Author(s):  
H.C. Kataria ◽  
M Gupta ◽  
M. Kumar ◽  
S. Kushwaha ◽  
S. Kashyap
Keyword(s):  
Drinking Water ◽  
Health Impacts ◽  
Chemical Parameters ◽  
Physico Chemical

scholarly journals Arsenic and heavy metals contamination, risk assessment and their source in drinking water of the Mardan District, Khyber Pakhtunkhwa, Pakistan

2015 ◽  
Vol 13 (4) ◽  
pp. 1073-1084 ◽  
Author(s):  
Nida Gul ◽  
Mohammad Tahir Shah ◽  
Sardar Khan ◽  
Nimat Ullah Khattak ◽  
Said Muhammad
Keyword(s):  
Heavy Metals ◽  
Risk Assessment ◽  
Drinking Water ◽  
Anthropogenic Sources ◽  
World Health ◽  
Physical Parameters ◽  
Chemical Parameters ◽  
Potential Health ◽  
Physico Chemical ◽  
Guideline Values

The present study was conducted to investigate the physico-chemical characteristics in drinking water of Mardan District, Pakistan. Furthermore, water quality was evaluated for the risk assessment of arsenic and heavy metals (HMs) and their contamination sources. Representative groundwater samples of shallow and deep sources were collected in the study area. These samples were analyzed for physical parameters, anions, light metals (LMs) and HMs. Results were compared with the drinking water guideline values set by the World Health Organization and the US Environmental Protection Agency. Average concentrations of anions, LMs and HMs were found within the maximum allowable contaminant levels except for bicarbonates, Fe, Cu, and Pb. Results revealed that hazard quotients >1 were observed for shallow groundwater for 10% samples only, suggesting potential health risk from water consumption. Correlation analysis and principal component analysis showed a relationship among various physico-chemical parameters in both shallow and deep groundwater. Statistical analyses suggested the geogenic and anthropogenic sources for possible enhancement of various physico-chemical parameters in the aquifer system of the study area.

scholarly journals Comparative Analysis of Physico-Chemical Parameters of Borehole, Pond and Well Water in Kashere Metropolis

2017 ◽  
Vol 2 (6) ◽  
pp. 42
Author(s):  
Abdulkadir A. Gidado ◽  
Ibrahim Halliru ◽  
Christiana Anawuese Kendeson ◽  
Yusuf Abdullahi
Keyword(s):  
Drinking Water ◽  
Water Samples ◽  
Standard Procedure ◽  
Human Consumption ◽  
Chemical Parameters ◽  
Quality Of Water ◽  
Major Cations ◽  
Physico Chemical ◽  
High Turbidity

In a bid to ascertain the quality of water for human consumption in Kashere Metropolis, essential physico-chemical parameters were evaluated on samples of drinking water obtained from boreholes, pond and wells located at densely populated areas, labelled as: Kashere cattle market Pond, KP; Kashere cottage Hospital Borehole, HB; Kashere Market Borehole, MB; Federal University, Kashere (FUK) campus Borehole, CB; Kashere cottage Hospital Well, HW; Kashere Market Well, MW and FUK campus Well, CW. Standard procedure for the determination of chemical and physical characteristics of the water samples were used. The results of the investigated parameters in the samples were as follows: ρH 6.61‒7.96, Turbidity 0.0‒2568 FTU, Electrical Conductivity 60.5‒1151 Mhocm-1, Total Dissolved Solids (TDS) 25.9‒518.0 mgL-1, Ca 0.0033‒0.5446 ppm, Mg 0.0793‒1.2215 ppm, Cd 0.0010‒0.0030 ppm, Zn 0.0024‒0.l054 ppm, Pb 0.0002‒0.0026 ppm and Fe 0.0044‒0.5649 ppm. Except for the concentration of Fe (in CB; 0.5649 ppm), all the analyzed minor and major cations in the water samples were in very low concentration and below the permissible limits of WHO standard guidelines values for drinking water.  It is recommended that, water from the pond should be properly treated before consumption due to its high turbidity.  Also periodic assessment of the quality of drinking water from these water sources should be conducted, to ascertain that they are not contaminated by either or both organic and inorganic pollutants.

scholarly journals A study on physico-chemical parameters of Dah lake water, District-Ballia (U.P.), India

2012 ◽  
Vol 4 (2) ◽  
pp. 237-240 ◽  
Author(s):  
Rajnish Kumar Sharma ◽  
Devendra Kumar Soni ◽  
Nirupma Agrawal
Keyword(s):  
Drinking Water ◽  
Economic Condition ◽  
Total Alkalinity ◽  
Total Hardness ◽  
Inorganic Pollutants ◽  
Chemical Parameters ◽  
Physico Chemical ◽  
Water District ◽  
Sensitive Parameters

The back water of river Saryu is a prime source of water for Dah Lake, located in Ballia district, have been studied to project the pristinety of water with respect to different pollution sensitive parameters i.e. organic pollutants– BOD, DO, COD, Inorganic pollutants - Electrical Conductivity, Turbidity, pH, total alkalinity, Chloride, Total hardness etc. The pH (7.68), total alkalinity (180.5 mg/l), Chloride (133.12 mg/l), Total hardness(139.83 mg/l), Calcium (60.26 mg/l) and Magnesium hardness (19.38 mg/l) were found well within the prescribed standard for drinking water (BIS 10500:1991) during the study period i.e. April 2006- March 2008. The study inferred that the water quality of Dah Lake is still free from the any kind of pollutants, must be due to its higher assimilative capacity. It also indicates the higher potential for pisiculture and drinking water sources (after disinfection) for the nearby villages which may ultimately improve the economic condition of the surrounding habitation.

scholarly journals Microbial Contamination in Drinking Water of Saggiyan-Lahore, Pakistan

2021 ◽  
Vol 12 (1) ◽  
pp. 76-80
Author(s):  
Mohsin Javed ◽  
Muhammad Umer Aslam ◽  
Sohail Nadeem ◽  
Hina Aftab ◽  
Shabbir Hussain ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Samples ◽  
Microbial Contamination ◽  
Fecal Coliforms ◽  
Chemical Parameters ◽  
E Coli ◽  
Drinking Purposes ◽  
Physico Chemical ◽  
Safe Limits

The present study was carried to evaluate the physico-chemical parameters and microbial contamination of drinking water in the area of Saggiyan, Lahore. The tested water samples (S1-S30) were found to contain 199.6-402 mg/L TDS, 196-260 ppm EC, 196-260 ppm Hardness, 0.8-17 NTU turbidity, 169-290 mg/L alkalinity, 0-0.1 ppb arsenic and 0-0.1 ppm fluoride contents. 95% of the water samples were found contaminated with fecal coliforms while 27% of the samples had shown the presence of E. coli. Though the physico-chemical parameters of most water samples were found in the safe limits of WHO, however, the presence of microbial contamination rendered it non-suitable for drinking purposes.

Sign in / Sign up

Export Citation Format

Share Document