MULTI-HOP WIRELESS NETWORKS AUTOMATED SIMULATION

2017 ◽  
Vol 13 (3) ◽  
pp. 68-78
Author(s):  
A. A. Pavlov ◽  
I. O. Datyev ◽  
M. G. Shishaev

Simulation is the main way for testing technologies in the field of multi-hop wireless networks (MWN). Creating a simulation model MWN - a time-consuming task associated with the use of specialized software tools, called network simulators. In this paper, the modern experience of modeling MWN and the main problems are formulated. One of the main problem is the comparative analysis' impossibility of the experiments results conducted by various researchers. This is due to the reasons associated with the models used for testing, the planning an imitation experiment and the principal differences in the network simulators. To solve this problem, authors propose a generalized conceptual model of MWN simulation and a specialized software package that automates the execution of experiment series in a heterogeneous modeling environment.

2020 ◽  
Vol 70 (1) ◽  
pp. 54-59
Author(s):  
Zhi Zhu ◽  
Yonglin Lei ◽  
Yifan Zhu

Model-driven engineering has become popular in the combat effectiveness simulation systems engineering during these last years. It allows to systematically develop a simulation model in a composable way. However, implementing a conceptual model is really a complex and costly job if this is not guided under a well-established framework. Hence this study attempts to explore methodologies for engineering the development of simulation models. For this purpose, we define an ontological metamodelling framework. This framework starts with ontology-aware system conceptual descriptions, and then refines and transforms them toward system models until they reach final executable implementations. As a proof of concept, we identify a set of ontology-aware modelling frameworks in combat systems specification, then an underwater targets search scenario is presented as a motivating example for running simulations and results can be used as a reference for decision-making behaviors.


Author(s):  
S.I. Karatushin ◽  
D.A. Khramova ◽  
N.A. Bildyuk

The paper introduces the results of studying the stress-strain state of the Novikov gearing in comparison with the involute gearing, similar in geometric parameters. In both versions, the wheel and gear are selected in size and gear ratio in accordance with the most common recommendations without additional hardening by chemical heat treatment. The zone of multiple contact of mated profiles is analyzed: changes in the geometry of contacts, pressure in the contact and stresses in various phases of gearing.


2021 ◽  
Author(s):  
Vladimir Tregubov

The article describes applications of using voice recognition technology based on artificial intelligence to the educational process. The author presents a comparative analysis of existing examples artificial intelligence in the educational process. Artificial intelligence uses in specialized software it makes educational process more convenient for both the students and the teachers. There is a description of an application “Academic phrase bank" developed by author. The application consists of two specialising actions for Google assistant. The application allows to increase academic vocabulary, train of creating grammatically correct academic expressions, and memorize templates of academic phrases. In active mode, this application helps to create correct phrases of academic English and improve the abilities of understanding English speech.


2021 ◽  
Author(s):  
Alexander Thatcher ◽  
Peter Colleran ◽  
William Roberts ◽  
Piers J. Johnson

Abstract This paper presents an analysis of the Corrib field surveillance dynamic pressure and rate data. The Corrib field, on production since December 2015, is a gas reservoir developed with six wells. The field static gas initially in place (GIIP) is around 1.2 Tcf of dry gas and the reservoir is comprised of a complex heterogeneous sandstone consisting of a high net to gross sequence of low sinuosity braided fluvial channel, sheet sand, playa and sandflat facies of varying reservoir quality (from single to hundreds of millidarcys) with an abundance of mapped faults. The dynamic reservoir analysis approach used in this study is based on a form of pressure-rate deconvolution that has been presented in an earlier paper SPE-195441 for the Tamar field, Israel. The pressure transient analysis (PTA) software that implements this analysis capability handles both singlewell and multi-well analysis problems. From a preliminary review of Corrib field dynamic behavior, it was concluded that this field data can be analyzed using single-well pressure-rate deconvolution applied to the data of each reservoir well separately. This contrasts with the Tamar field that required a true multiwell deconvolution analysis approach. Different approaches in these cases are dictated by the differences in reservoir architecture, geology, offtake strategy and the character of connectivity across these two fields. There are several pressure-rate deconvolution algorithms implemented in different PTA software tools used in the industry. All these algorithms implement a form of automatic regression and are sensitive to the quality of pressure and rate data that serve as input into the deconvolution algorithm. These automatic algorithms are often not robust enough to be used with surveillance type data acquired during long term production operations. The deconvolution approach used in this work is not automatic and, as a result, the deconvolution results are not as sensitive to the data quality. Rather, it relies on specialized software that facilitates manual reconstruction of constant rate drawdown responses. This human approach in combination with specialized software allows an engineer not to just reconstruct a drawdown response but to "explore" the pressure and rate data to develop significant insights of the dynamic reservoir behavior. This deeper understanding is an additional advantage over automated techniques and is the purpose of reservoir analysis. The Corrib field analysis discussed in this paper is a demonstration of what can be achieved using this combination of human intelligence and specialized software tools. Demonstration of the workflow used for manual reconstruction of deconvolved response functions and the role of the specialized software used that implements this workflow is explained. In the course of this reconstruction, an "exploration" process of trying to reconstruct the transient pressure behavior reflected in the data is engaged/utilized. Once reconstructed, this response is interpreted in terms of reservoir and well properties. The end result of this investigation is a deep understanding of the Corrib gas field dynamic behavior not easily obtained from conventional PTA methods. For example, it shows that early production data clearly exhibit signs of interference between wells. However, once the field production drops off the plateau period and the well production starts to decline, the six producing wells dynamically divide the reservoir into separate drainage areas and the well interference in a way "disappears" - the wells behave as if each of them produces from its own drainage compartment. This allows pressure rate deconvolution on a single-well basis, based on each compartment instead of using multi-well deconvolution on the field as a whole. The pore volume of each such compartment is reflected in the late time pressure behavior of the respective drawdown response associated with the well data. The sum of these individual pore volumes per well in the field yields the total pore volume connected to the wells that is supported by the reservoir dynamic behavior. These insights are reinforced by the use of synthetic models to provide clarity and understanding of the drainage compartment theory used during Corrib analysis.


Sign in / Sign up

Export Citation Format

Share Document