scholarly journals Mathematical model of the vibration cone crusher with three degrees of freedom

2019 ◽  
Vol 25 ◽  
pp. 42-47 ◽  
Author(s):  
Petr Morozov ◽  
Serge Miheev
Keyword(s):  
Mathematical Model ◽  
Degrees Of Freedom ◽  
Cone Crusher ◽  
Three Degrees Of Freedom

Dynamic Simulation of Freight Car and Lading During Impact

1977 ◽  
Vol 99 (4) ◽  
pp. 859-866 ◽  
Author(s):  
P. V. Kasbekar ◽  
V. K. Garg ◽  
G. C. Martin
Keyword(s):  
Mathematical Model ◽  
Computer Simulation ◽  
Dynamic Analysis ◽  
Dynamic Simulation ◽  
Parametric Study ◽  
Degrees Of Freedom ◽  
Impact Damage ◽  
Packaging Materials ◽  
Freight Car ◽  
Three Degrees Of Freedom

A dynamic analysis is presented to explain damage to railroad cars and ladings resulting from impacts. In the analysis, a mathematical model consisting of the car body and freight in the car is presented. Each freight element assumes three degrees of freedom for the computer simulation. A parametric study is made to establish sensitivity of car parameters and impact conditions. The study should be useful to aid in finding means for controlling impact damage and in designing packaging materials.

scholarly journals Active Disturbance Rejection for a Three Degrees of Freedom Gyroscope

2018 ◽  
Vol 51 (13) ◽  
pp. 372-377 ◽  
Author(s):  
Juan E. Andrade García ◽  
Alejandra Ferreira de Loza ◽  
Luis T. Aguilar ◽  
Ramón I. Verdés
Keyword(s):  
Disturbance Rejection ◽  
Degrees Of Freedom ◽  
Active Disturbance Rejection ◽  
Three Degrees Of Freedom

scholarly journals Analysis of Dynamic Response of a Two Degrees of Freedom (2-DOF) Ball Bearing Nonlinear Model

2021 ◽  
Vol 11 (2) ◽  
pp. 787
Author(s):  
Bartłomiej Ambrożkiewicz ◽  
Grzegorz Litak ◽  
Anthimos Georgiadis ◽  
Nicolas Meier ◽  
Alexander Gassner
Keyword(s):  
Mathematical Model ◽  
Degrees Of Freedom ◽  
Ball Bearing ◽  
Hertzian Contact ◽  
Two Degrees Of Freedom ◽  
Wide Range ◽  
Shape Errors ◽  
Nonlinear Features ◽  
Fourier Transform Phase ◽  
Hertzian Contact Theory

Often the input values used in mathematical models for rolling bearings are in a wide range, i.e., very small values of deformation and damping are confronted with big values of stiffness in the governing equations, which leads to miscalculations. This paper presents a two degrees of freedom (2-DOF) dimensionless mathematical model for ball bearings describing a procedure, which helps to scale the problem and reveal the relationships between dimensionless terms and their influence on the system’s response. The derived mathematical model considers nonlinear features as stiffness, damping, and radial internal clearance referring to the Hertzian contact theory. Further, important features are also taken into account including an external load, the eccentricity of the shaft-bearing system, and shape errors on the raceway investigating variable dynamics of the ball bearing. Analysis of obtained responses with Fast Fourier Transform, phase plots, orbit plots, and recurrences provide a rich source of information about the dynamics of the system and it helped to find the transition between the periodic and chaotic response and how it affects the topology of RPs and recurrence quantificators.

scholarly journals Cyclic Deformation of Microcantilevers Using In-Situ Micromanipulation

2021 ◽  
Author(s):  
A. H. S. Iyer ◽  
M. H. Colliander
Keyword(s):  
Degrees Of Freedom ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Structural Components ◽  
Cyclic Testing ◽  
Phase Boundaries ◽  
Bulk Specimen ◽  
Arbitrary Position ◽  
Three Degrees Of Freedom

Abstract Background The trend in miniaturisation of structural components and continuous development of more advanced crystal plasticity models point towards the need for understanding cyclic properties of engineering materials at the microscale. Though the technology of focused ion beam milling enables the preparation of micron-sized samples for mechanical testing using nanoindenters, much of the focus has been on monotonic testing since the limited 1D motion of nanoindenters imposes restrictions on both sample preparation and cyclic testing. Objective/Methods In this work, we present an approach for cyclic microcantilever bending using a micromanipulator setup having three degrees of freedom, thereby offering more flexibility. Results The method has been demonstrated and validated by cyclic bending of Alloy 718plus microcantilevers prepared on a bulk specimen. The experiments reveal that this method is reliable and produces results that are comparable to a nanoindenter setup. Conclusions Due to the flexibility of the method, it offers straightforward testing of cantilevers manufactured at arbitrary position on bulk samples with fully reversed plastic deformation. Specific microstructural features, e.g., selected orientations, grain boundaries, phase boundaries etc., can therefore be easily targeted.

scholarly journals Galloping Stability and Wind Tunnel Test of Iced Quad Bundled Conductors considering Wake Effect

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Xiaohui Liu ◽  
Ming Zou ◽  
Chuan Wu ◽  
Mengqi Cai ◽  
Guangyun Min ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Transmission Lines ◽  
Degrees Of Freedom ◽  
Wind Tunnel Test ◽  
Aerodynamic Coefficients ◽  
Wake Effect ◽  
Aerodynamic Coefficient ◽  
Set Up ◽  
The Stability ◽  
Three Degrees Of Freedom

A new quad bundle conductor galloping model considering wake effect is proposed to solve the problem of different aerodynamic coefficients of each subconductor of iced quad bundle conductor. Based on the quasistatic theory, a new 3-DOF (three degrees of freedom) galloping model of iced quad bundle conductors is established, which can accurately reflect the energy transfer and galloping of quad bundle conductor in three directions. After a series of formula derivations, the conductor stability judgment formula is obtained. In the wind tunnel test, according to the actual engineering situation, different variables are set up to accurately simulate the galloping of iced quad bundle conductor under the wind, and the aerodynamic coefficient is obtained. Finally, according to the stability judgment formula of this paper, calculate the critical wind speed of conductor galloping through programming. The dates of wind tunnel test and calculation in this paper can be used in the antigalloping design of transmission lines.

Analysis and Optimization of a New Differentially Driven Cable Parallel Robot

2015 ◽  
Vol 7 (3) ◽  
Author(s):  
Hamed Khakpour ◽  
Lionel Birglen ◽  
Souheil-Antoine Tahan
Keyword(s):  
Kinematic Analysis ◽  
Design Methodology ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Cable Robot ◽  
Proper Design ◽  
Two Indices ◽  
Three Degrees Of Freedom ◽  
Cable Robots

In this paper, a new three degrees of freedom (DOF) differentially actuated cable parallel robot is proposed. This mechanism is driven by a prismatic actuator and three cable differentials. Through this design, the idea of using differentials in the structure of a spatial cable robot is investigated. Considering their particular properties, the kinematic analysis of the robot is presented. Then, two indices are defined to evaluate the workspaces of the robot. Using these indices, the robot is subsequently optimized. Finally, the performance of the optimized differentially driven robot is compared with fully actuated mechanisms. The results show that through a proper design methodology, the robot can have a larger workspace and better performance using differentials than the fully driven cable robots using the same number of actuators.

Sign in / Sign up

Export Citation Format

Share Document