scholarly journals Hydrological modeling using Effective Rainfall routed by the Muskingum method (ERM)

2013 ◽  
Vol 15 (4) ◽  
pp. 1437-1455 ◽  
Author(s):  
M. Baymani-Nezhad ◽  
D. Han

This paper introduces a new rainfall runoff model called ERM (Effective Rainfall routed by Muskingum method), which has been developed based on the popular IHACRES model. The IHACRES model consists of two main components to transfer rainfall to effective rainfall and then to streamflow. The second component of the IHACRES model is a linear unit hydrograph which has been replaced by the classic and well-known Muskingum method in the ERM model. With the effective rainfall by the first component of the IHACRES model, the Muskingum method is used to estimate the quick flow and slow flow separately. Two different sets of input data (temperature or evapotranspiration, rainfall and observed streamflow) and genetic algorithm (GA) as an optimization scheme have been selected to compare the performance of IHACRES and ERM models in calibration and validation. By testing the models in three different catchments, it is found that the ERM model has better performance over the IHACRES model across all three catchments in both calibration and validation. Further studies are needed to apply the ERM on a wide range of catchments to find its strengths and weaknesses.

Proceedings ◽  
2018 ◽  
Vol 7 (1) ◽  
pp. 24
Author(s):  
Iolanda Borzì ◽  
Brunella Bonaccorso ◽  
Aldo Fiori

A flow regime can be broadly categorized as either perennial, intermittent, or ephemeral, depending on whether the streamflow is continuous all year round, or ceasing for weeks or months each year. Various conceptual models are needed to capture the behavior of these different flow regimes, which reflect differences in the stream–groundwater hydrologic connection. As the hydrologic connection becomes more transient and a catchment’s runoff response more nonlinear, such as for intermittent streams, the need for explicit representation of the groundwater increases. In the present study, we investigated the connection between the Northern Etna groundwater system and the Alcantara River basin in Sicily, which is intermittent in the upstream, and perennial since the midstream, due to groundwater resurgence. To this end, we apply a modified version of IHACRES rainfall–runoff model, whose input data are a continuous series of concurrent daily streamflow, rainfall and temperature data. The structure of the model includes three different modules: (1) a nonlinear loss module that transforms precipitation to effective rainfall by considering the influence of temperature; (2) a linear module based on the classical convolution between effective rainfall and the unit hydrograph which is able to simulate the quick component of the runoff; and (3) a second nonlinear module that simulates the slow component of the runoff and that feeds the groundwater storage. From the sum of the quick and slow components (except for groundwater losses, representing the aquifer recharge), the total streamflow is derived. This model structure is applied separately to sub-basins showing different hydrology and land use. The model is calibrated at Mojo cross-section, where daily streamflow data are available. Point rainfall and temperature data are spatially averaged with respect to the considered sub-basins. Model calibration and validation are carried out for the period 1984–1986 and 1987–1988 respectively.


Water ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 3137
Author(s):  
Santiago Zazo ◽  
José-Luis Molina ◽  
Verónica Ruiz-Ortiz ◽  
Mercedes Vélez-Nicolás ◽  
Santiago García-López

The uncertainty in traditional hydrological modeling is a challenge that has not yet been overcome. This research aimed to provide a new method called the hybrid causal–hydrological (HCH) method, which consists of the combination of traditional rainfall–runoff models with novel hydrological approaches based on artificial intelligence, called Bayesian causal modeling (BCM). This was implemented by building nine causal models for three sub-basins of the Barbate River Basin (SW Spain). The models were populated by gauging (observing) short runoff series and from long and short hydrological runoff series obtained from the Témez rainfall–runoff model (T-RRM). To enrich the data, all series were synthetically replicated using an ARMA model. Regarding the results, on the one hand differences in the dependence intensities between the long and short series were displayed in the dependence mitigation graphs (DMGs), which were attributable to the insufficient amount of data available from the hydrological records and to climate change processes. The similarities in the temporal dependence propagation (basin memory) and in the symmetry of DMGs validate the reliability of the hybrid methodology, as well as the results generated in this study. Consequently, water planning and management can be substantially improved with this approach.


2020 ◽  
Author(s):  
Eber Risco ◽  
Waldo Lavado ◽  
Pedro Rau

<p>Water resources availability in the southern Andes of Peru is being affected by glacier and snow retreat. This problem is already perceived in the Vilcanota river basin, where hydro-climatological information is scarce. In this particular mountain context, any water plan represents a great challenge. To cope with these limitations, we propose to assess the space-time consistency of 10 satellite-based precipitation products (CMORPH–CRT v.1, CMORPH–BLD v.1, CHIRP v.2, CHIRPS v.2, GSMaP v.6, GSMaP correction, MSWEP v.2.1, PERSIANN, PERSIANN–CDR, TRMM 3B42) with 25 rain gauge stations in order to select the best product that represents the variability in the Vilcanota basin. For this purpose, through a direct evaluation of sensitivity analysis via the GR4J parsimonious hydrological model over the basin. GSMap v.6, TRMM 3B42 and CHIRPS were selected to represent rainfall spatial variability according with different statistical criteria, such as correlation coefficient (CC), standard deviation (SD), percentage of bias (%B) and centered mean square error (CRMSE). To facilitate the interpretation of statistical results, Taylor's diagram was used to represent the CC statistics, normalized values of SD and CRMSE.</p><p>A distributed degree-day model was chosen to analyse the sensitivity of snow cover simulations and hydrological contribution. The GR4J rainfall-runoff model was calibrated (using global optimization) and applied to simulate the daily discharge and compared with the Distributed Hydrology and Vegetation Model with Glacier Dynamics (DHSVM-GDM) over the 2001-2018 period. Furthermore, the simulated streamflow was evaluated through comparisons with observations at the hydrological stations using Nash–Sutcliffe efficiency and Kling Gupta Efficiency (KGE). The results show that the snow-runoff have increased in recent years, so new water management and planning strategies should be developed in the basin. This research is part of the multidisciplinary collaboration between British and Peruvian scientists (Newton Fund, Newton-Paulet) through RAHU project.</p>


Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2257 ◽  
Author(s):  
Jung-Hun Song ◽  
Younggu Her ◽  
Kyo Suh ◽  
Moon-Seong Kang ◽  
Hakkwan Kim

Regionalized lumped rainfall-runoff (RR) models have been widely employed as a means of predicting the streamflow of an ungauged watershed because of their simple yet effective simulation strategies. Parameter regionalization techniques relate the parameter values of a model calibrated to the observations of gauged watersheds to the geohydrological characteristics of the watersheds. Thus, the accuracy of regionalized models is dependent on the calibration processes, as well as the structure of the model used and the quality of the measurements. In this study, we have discussed the potentials and limitations of hydrological model parameter regionalization to provide practical guidance for hydrological modeling of ungauged watersheds. This study used a Tank model as an example model and calibrated its parameters to streamflow observed at the outlets of 39 gauged watersheds. Multiple regression analysis identified the statistical relationships between calibrated parameter values and nine watershed characteristics. The newly developed regional models provided acceptable accuracy in predicting streamflow, demonstrating the potential of the parameter regionalization method. However, uncertainty associated with parameter calibration processes was found to be large enough to affect the accuracy of regionalization. This study demonstrated the importance of objective function selection of the RR model regionalization.


2008 ◽  
Vol 5 (1) ◽  
pp. 1-26 ◽  
Author(s):  
G. Moretti ◽  
A. Montanari

Abstract. The estimation of the peak river flow for ungauged river sections is a topical issue in applied hydrology. Spatially distributed rainfall-runoff models can be a useful tool to this end, since they are potentially able to simulate the river flow at any location of the watershed drainage network. However, it is not fully clear to what extent these models can provide reliable simulations over a wide range of spatial scales. This issue is investigated here by applying a spatially distributed, continuous simulation rainfall-runoff model to infer the flood frequency distribution of the Riarbero Torrent. This is an ungauged mountain creek located in northern Italy, whose drainage area is 17 km2. The results were checked by using estimates of the peak river flow obtained by applying a classical procedure based on hydrological similarity principles. The analysis highlights interesting perspectives for the application of spatially distributed models to ungauged catchments.


2017 ◽  
Vol 21 (12) ◽  
pp. 6007-6030 ◽  
Author(s):  
James C. Bennett ◽  
Quan J. Wang ◽  
David E. Robertson ◽  
Andrew Schepen ◽  
Ming Li ◽  
...  

Abstract. Despite an increasing availability of skilful long-range streamflow forecasts, many water agencies still rely on simple resampled historical inflow sequences (stochastic scenarios) to plan operations over the coming year. We assess a recently developed forecasting system called forecast guided stochastic scenarios (FoGSS) as a skilful alternative to standard stochastic scenarios for the Australian continent. FoGSS uses climate forecasts from a coupled ocean–land–atmosphere prediction system, post-processed with the method of calibration, bridging and merging. Ensemble rainfall forecasts force a monthly rainfall–runoff model, while a staged hydrological error model quantifies and propagates hydrological forecast uncertainty through forecast lead times. FoGSS is able to generate ensemble streamflow forecasts in the form of monthly time series to a 12-month forecast horizon. FoGSS is tested on 63 Australian catchments that cover a wide range of climates, including 21 ephemeral rivers. In all perennial and many ephemeral catchments, FoGSS provides an effective alternative to resampled historical inflow sequences. FoGSS generally produces skilful forecasts at shorter lead times ( <  4 months), and transits to climatology-like forecasts at longer lead times. Forecasts are generally reliable and unbiased. However, FoGSS does not perform well in very dry catchments (catchments that experience zero flows more than half the time in some months), sometimes producing strongly negative forecast skill and poor reliability. We attempt to improve forecasts through the use of (i) ESP rainfall forcings, (ii) different rainfall–runoff models, and (iii) a Bayesian prior to encourage the error model to return climatology forecasts in months when the rainfall–runoff model performs poorly. Of these, the use of the prior offers the clearest benefit in very dry catchments, where it moderates strongly negative forecast skill and reduces bias in some instances. However, the prior does not remedy poor reliability in very dry catchments. Overall, FoGSS is an attractive alternative to historical inflow sequences in all but the driest catchments. We discuss ways in which forecast reliability in very dry catchments could be improved in future work.


2016 ◽  
Vol 24 (4) ◽  
pp. 1-7 ◽  
Author(s):  
P. Sleziak ◽  
J. Szolgay ◽  
K. Hlavčová ◽  
J. Parajka

AbstractThe main objective of the paper is to understand how the model’s efficiency and the selected climatic indicators are related. The hydrological model applied in this study is a conceptual rainfall-runoff model (the TUW model), which was developed at the Vienna University of Technology. This model was calibrated over three different periods between 1981-2010 in three groups of Austrian catchments (snow, runoff, and soil catchments), which represent a wide range of the hydroclimatic conditions of Austria. The model’s calibration was performed using a differential evolution algorithm (Deoptim). As an objective function, we used a combination of the Nash-Sutcliffe coefficient (NSE) and the logarithmic Nash-Sutcliffe coefficient (logNSE). The model’s efficiency was evaluated by Volume error (VE). Subsequently, we evaluated the relationship between the model’s efficiency (VE) and changes in the climatic indicators (precipitation ΔP, air temperature ΔT). The implications of findings are discussed in the conclusion.


2021 ◽  
Author(s):  
Suman Kumar Padhee ◽  
Subashisa Dutta

&lt;p&gt;A recent initiative by the hydrologic community identified processes that control hillslope-riparian-stream-groundwater interactions as one of the major unsolved scientific problems in Hydrology. It is a long-time argument among hydrologists whether to eliminate the minor details from field-based costing a lot of time, effort, and resources to understand the hydrological process in watershed scale. The modelling approaches are helpful is these cases by focusing on the dominant controllers and might/might'nt bypassing the implications from minor details. In this work, a conceptual semi-distributed rainfall-runoff model for hilly watersheds is used with satellite-based hydrometeorological inputs to parameterize, and thus understand by calibration and validation, at Koshi River Basin, a partly hilly watershed in Himalaya. The semi-distributed model is operated by dividing the river basin into small grids of around 1km&lt;sup&gt;2&lt;/sup&gt;, each representing a micro-watershed. Majority of the model concept is drawn from fill and spill approach from previous literature, observations from plot-scale hillslope experiments, and macropore characterization from dye-tracer experiments, which are upscaled at micro-watershed scale. The parameterization in the rainfall-runoff model includes the daily average variables namely, threshold for runoff generation (&lt;em&gt;T&lt;/em&gt;), gradient of runoff generation rate (&lt;em&gt;S&lt;/em&gt;), saturated hydraulic conductivity for hillslope aquifers (&lt;em&gt;Ksat&lt;/em&gt;), and aquifer thickness limit (&lt;em&gt;D&lt;/em&gt;). Variable ranges of these parameters were simulated to find the best values (&lt;em&gt;T&lt;/em&gt; = 1&amp;#177;0.25cm; &lt;em&gt;S&lt;/em&gt; = 0.6 &amp;#8211; 0.1; &lt;em&gt;Ksat&lt;/em&gt; &amp;#8776; 10&lt;sup&gt;5&lt;/sup&gt; &amp;#8211; 10&lt;sup&gt;10&lt;/sup&gt; times original Ksat; and &lt;em&gt;D &lt;/em&gt;= 1m). These ranges resulted in over (NSE = 0.6; R&lt;sup&gt;2&lt;/sup&gt; = 0.65) during calibration and validation for daily flow volume at the outlet. In these simulations, the &lt;em&gt;Ksat &lt;/em&gt;multiplied with factors at several orders higher scale and producing good NSE values shows domination of preferential pathways in runoff generation process. This might represent a flow similar to that of overland flow affecting the surface runoff volume at river basin scale. This model could be used for water budgeting studies in hilly watersheds where several hillslopes dominated by macropores are present.&lt;/p&gt;


Sign in / Sign up

Export Citation Format

Share Document