Head loss performance and modeling of burnt oil palm shell in deep bed filtration

2007 ◽  
Vol 7 (5-6) ◽  
pp. 141-147
Author(s):  
Ahmad Jusoh ◽  
S. Goh Eng Giap ◽  
Lam Su Shiung ◽  
N. Ali ◽  
M.J.M.M. Noor ◽  
...  
Keyword(s):  
Water Quality ◽  
Water Treatment ◽  
Oil Palm ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Head Loss ◽  
Flow Rates ◽  
Running Time ◽  
Oil Palm Shell ◽  
Filtration Unit

Filtration is a common unit operation in a water treatment plant. The effectiveness of granular filter media in treating surface water and removing suspended solids is already well established. However, less effort in the mathematical modeling towards the design of the filtration unit is observed. The current study involved head loss performance evaluation and development of a mathematical model to correlate maximum service time of filter at a maximum allowable head loss with various effective sizes and flow rates. Sand and burnt oil palm shell (BOPS) used as filter media in single and dual media filters were subjected to different effective sizes and flow rates. The average influent water turbidity for each filter (at specific effective size and flow rate) before entering the filtration unit was from 1 to 5 NTU. This was a pilot a study on settled water that was conducted in a Malaysian water treatment plant. Results suggest that all filters are capable of producing water with acceptable turbidity unit (<1 NTU). The total running time and filtrate water quality produced by BOPS/sand dual media filter was much better (i.e. the running time of BOPS/sand was four to nine times greater than sand single media filter) than BOPS and sand single media filters. The experimental data were well represented by a newly developed model and results of fitting show a high correlation coefficient (R2) of 0.991. The maximum allowable head loss was selected as 240 cm with an acceptable filtrate water quality (less than 1 NTU). In addition, the current results will be a supplementary tool for engineers in designing a proper filtration unit.

scholarly journals Evaluation of Water Quality and the Efficiency of Ifraz-2 Water treatment plant-Units

2019 ◽  
Vol 6 (2) ◽  
pp. 121-138
Author(s):  
Imad Ali Omar
Keyword(s):  
Water Quality ◽  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Quality Parameters ◽  
Raw Water ◽  
Treated Water ◽  
Removal Efficiencies ◽  
Filtration Unit

Abstract: Water treatment plant (WTP) is essential for providing clean and safe water to the habitants. There is a necessity to evaluate the performance of (WTP) for proper treatment of raw water. The purpose of the present study is to evaluate the quality of treated water by investigating the performance of Ifraz-2 (WTP) units located in Erbil City, Iraq. For assessment of the (WTP) units, samples were taken for a duration of five months from different locations: raw water (the source), post-clarification processes, post-filtration processes, and from the storage tank. Removal efficiencies for the units, and for the whole (WTP) were calculated and presented. Obtained removal efficiencies for the sedimentation unit; filtration unit; and the entire Ifraz-2 (WTP) were 91.51 %, 64.71 %, and 97.29 %, respectively. After the process of disinfection and storage, the valued of the turbidity of the treated water were ranged from 1.2 to 9.7 (Nephelometric Turbidity Units) NTU. Besides, water quality index (WQI) for the (WTP) was studied and calculated for 14 physicochemical water quality parameters. WQI for Ifraz-2 (WTP) was 51.87 and it is regarded as a good level. Also, operational problems have been detected and reported during the research period, especially during sedimentation, filtration, and disinfection. Suitable solutions have been reported to the operational team.

scholarly journals Evaluating the Impacts of Integrated Pollution on Water Quality of the Trans-Boundary Neris (Viliya) River

2018 ◽  
Vol 10 (11) ◽  
pp. 4239 ◽  
Author(s):  
Marina Valentukevičienė ◽  
Lina Bagdžiūnaitė-Litvinaitienė ◽  
Viktoras Chadyšas ◽  
Andrius Litvinaitis
Keyword(s):  
Water Quality ◽  
Water Treatment ◽  
Technological Development ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Suspended Solid ◽  
Storm Water ◽  
Boundary Area ◽  
Water Flows

The trans-boundary area between the Europe Union and other countries is highly susceptible to changes in water quality and variations in the potential pollution load that could influence its eco-systems significantly. The Neris (Viliya) River is one of the biggest surface water bodies in Lithuania and Belarus with an ecologically important area protected by international legislation. The study was aimed at evaluating the impacts of integrated pollution on water quality of the Neris River taking into account different storm-water flows and ecological scenarios. For this purpose, qualitative and quantitative statistical evaluation was set up and calculation was done; different integrated pollution loads of the catchment area were estimated. The evaluation considered a decrease in river discharge due to changes in the regional storm-water flow and technological development that should lead to the growing covered surface and a reduction in the untreated storm-water flows. The obtained results indicated that, in the case of storm-water treatment, the total nitrate and phosphate concentrations will decrease, while in the cases of changes in combined suspended solid, the concentration of nutrients will decrease. Thus, a trans-boundary storm-water treatment plant of the Viliya River is required as it should eliminate pollution accumulation and restore its acceptable environmental status. A coordinated international project for the entire catchment of the Neris (Viliya) River based on the specifications and requirements of the EU Water Framework Directive (EU 2000) should be developed and implemented. Subsequently, ecological river-use policies should be established at the international level, which should offer considerable perspectives for the sustainable development of the area.

scholarly journals Online flow cytometric monitoring of microbial water quality in a full-scale water treatment plant

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Benjamin Buysschaert ◽  
Lotte Vermijs ◽  
Agathi Naka ◽  
Nico Boon ◽  
Bart De Gusseme
Keyword(s):  
Water Quality ◽  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Full Scale ◽  
Microbial Water Quality ◽  
Flow Cytometric

Chemical monitoring strategy for the assessment of advanced water treatment plant performance

2010 ◽  
Vol 10 (6) ◽  
pp. 961-968 ◽  
Author(s):  
J. E. Drewes ◽  
J. A. McDonald ◽  
T. Trinh ◽  
M. V. Storey ◽  
S. J. Khan
Keyword(s):  
Water Quality ◽  
Water Treatment ◽  
Reverse Osmosis ◽  
Pilot Plant ◽  
Monitoring Program ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Pilot Scale ◽  
Chemical Monitoring ◽  
Plant Operation

A pilot-scale plant was employed to validate the performance of a proposed full-scale advanced water treatment plant (AWTP) in Sydney, Australia. The primary aim of this study was to develop a chemical monitoring program that can demonstrate proper plant operation resulting in the removal of priority chemical constituents in the product water. The feed water quality to the pilot plant was tertiary-treated effluent from a wastewater treatment plant. The unit processes of the AWTP were comprised of an integrated membrane system (ultrafiltration, reverse osmosis) followed by final chlorination generating a water quality that does not present a source of human or environmental health concern. The chemical monitoring program was undertaken over 6 weeks during pilot plant operation and involved the quantitative analysis of pharmaceuticals and personal care products, steroidal hormones, industrial chemicals, pesticides, N-nitrosamines and halomethanes. The first phase consisted of baseline monitoring of target compounds to quantify influent concentrations in feed waters to the plant. This was followed by a period of validation monitoring utilising indicator chemicals and surrogate measures suitable to assess proper process performance at various stages of the AWTP. This effort was supported by challenge testing experiments to further validate removal of a series of indicator chemicals by reverse osmosis. This pilot-scale study demonstrated a simplified analytical approach that can be employed to assure proper operation of advanced water treatment processes and the absence of trace organic chemicals.

The impact of algogenic organic matter on water treatment plant operation and water quality: A review

2015 ◽  
Vol 46 (4) ◽  
pp. 291-335 ◽  
Author(s):  
M. Pivokonsky ◽  
J. Naceradska ◽  
I. Kopecka ◽  
M. Baresova ◽  
B. Jefferson ◽  
...  
Keyword(s):  
Water Quality ◽  
Organic Matter ◽  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Plant Operation ◽  
The Impact

scholarly journals Investigation of water quality changes in drinking water supplied from Sitlee water treatment plant on River Tawi to Old Jammu City, Jammu, J&K, India

2018 ◽  
Vol 10 (2) ◽  
pp. 601-607
Author(s):  
Poonam Kundan ◽  
Deepika Slathia
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Water Samples ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Quality Parameters ◽  
Faecal Coliform ◽  
Quality Changes ◽  
Distribution Point

In the present study, an attempt has been made to evaluate the water quality changes in River Tawi water treated at Sitlee water treatment plant, and supplied for drinking to Old Jammu City, Jammu, J&K, India. Water samples from the treated water unit of Sitlee water treatment plant and around ten houses from the distribution point (Old Jammu City) were analyzed monthly for various physicochemical parameters for a period of one year (February 2014 to January 2015). The study indicated deterioration of drinking water quality during its passage through the distribution network which has been attributed to the leakages and defects in the old pipe system supplying water to the Jammu city. Comparison of analyzed water quality parameters with the drinking water standards prescribed by World Health Organization (WHO) and Bureau of Indian Standards (BIS) indicated that parameters like DO (7.49-8.24mg/l), calcium(49.93-67.08mg/l), magnesium(16.14-25.21mg/l) and potassium(6.99-7.93mg/l) were almost nearing the desirable limits but were within the permissible limits and parameters like turbidity(3.5-8.17 NTU) and total hardness(78.87-120.50mg/l) were above the desirable limits in the water samples collected from the distribution point. The collected primary data for the thirteen water quality parameters has been used to calculate the Arithmetic Water Quality Index(WQI) which has shown monsoon increase with higher values at distribution point(65.65). One time microbial analysis (MPN/100ml) for total and faecal coliform has indicated presence of faecal coliform (<1/100ml) in water samples from eight households at distribution point which indicates contamination of water with human faecal matter during its passage through the distribution network. According to microbial standards laid down by Central Pollution Control Board (2008), water contaminated with faecal coliform is unfit for drinking without conventional treatment.

Sign in / Sign up

Export Citation Format

Share Document