The application of the root zone method for the treatment and reuse of high-strength abattoir waste in Mexico

1997 ◽  
Vol 35 (5) ◽  
pp. 271-278 ◽  
Author(s):  
Fermin Rivera ◽  
Alan Warren ◽  
Colin R. Curds ◽  
Esperanza Robles ◽  
Alejandro Gutierrez ◽  
...  

A two-stage system for treating high-strength wastewater from an abattoir at Pachuca, Mexico is described. The system consists of an anaerobic digester followed by an artificially-constructed wetland which employs horizontal subsurface flow through the root zone of emergent hydrophytes planted in a gravel substrate. The main goals of this study were to monitor the treatment efficiency of the system for the first twelve months of operation and to assess the suitability of the effluent for irrigation purposes. The treatment efficiency during the twelve month period was generally good with mean removal efficiencies of 88.5% for BOD5, 87.4% COD, 89% suspended solids, 73.6% organic nitrogen and >99% faecal coliforms. Removal rates were generally poor for orthophosphates, NH3-nitrogen and NO3-nitrogen. The differing roles of the two stages in the treatment process are discussed. Although not suitable for irrigating crops, the effluent is being successfully used for the irrigation of ornamental plants and recreational lands.

1995 ◽  
Vol 32 (3) ◽  
pp. 211-218 ◽  
Author(s):  
Fermin Rivera ◽  
Alan Warren ◽  
Elizabeth Ramirez ◽  
Olivier Decamp ◽  
Patricia Bonilla ◽  
...  

Full-scale and laboratory-scale artificially constructed reed beds utilising the root zone method (RZM) of wastewater treatment were investigated for their removal efficiencies of a range of pathogenic microorganisms. Performances were compared for RZMs employing different hydrophytes, planting substrates and climatic conditions. All pathogens were removed by the RZM to some extent. Planted beds generally performed better than unplanted beds although the type of hydrophyte used was not significant. Gravel beds were more efficient than soil beds in the removal of protozoan pathogens and of helminth eggs; numbers of these pathogens were below levels of detection in gravel bed effluents. For faecal coliforms the type of planting substrate was not significant, providing hydrophytes were present. Climatic conditions made little difference to treatment efficiency although seasonal variation was observed in temperature climates, where the removal of faecal coliforms declined in the winter months, and in subtropical climates where higher numbers of free-living amoebae were recorded during the summer. It was concluded that the RZM is a suitable method for the treatment of domestic wastewaters in tropical and subtropical regions of Mexico.


1982 ◽  
Vol 14 (6-7) ◽  
pp. 429-442
Author(s):  
I L Bogert

A one-year experimental program conducted at Edgewater, New Jersey, U.S.A. evaluated the concept of providing secondary treatment by the installation of rotating biological contactors (RBC's) in modified primary sedimentation tanks. A primary tank was divided horizontally into two zones separated by an intermediate floor. Four RBC's were placed in the upper zone. The lower zone provided secondary sedimentation. High rate primary sedimentation was provided to remove grit and trash without removing substantial portions of BOD and SS. The experimental program funded by the U.S. EPA and the Borough of Edgewater was conducted over a full year at different loads. The system proved to be an effective secondary treatment process with little difference in treatment efficiency between summer and winter conditions.


1995 ◽  
Vol 31 (5-6) ◽  
pp. 85-89 ◽  
Author(s):  
S. J. Turner ◽  
G. D. Lewis

Over a 12 month period F-specific bacteriophages, faecal coliforms and enterococci were compared as microbial indicator organisms for the quality of a wastewater treatment (oxidation pond) system. Results suggest that enterococci may be the most useful indicator for oxidation pond systems.


2013 ◽  
Vol 378 ◽  
pp. 209-212
Author(s):  
Dong Gun Lee ◽  
Byunh Hyun Ahn ◽  
Je Hyun Lee ◽  
Uk Rae Cho ◽  
Bon Heun Koo

Al7075 alloy has typically good mechanical properties. Al7075 alloy has an ultimate tensile strength and yield strength, which is commonly used in the manufacturing of heavy-duty structures requiring good corrosion resistance and in applications requiring high strength to weight ratio, as well as good fatigue resistance. However, as compared to strength and corrosion of conventional steel material, it has some drawbacks. To overcome these disadvantages, Electrolytic plasma processing (EPP) was used. (EPP) is a novel electrochemical and physical surface treatment process for generating protective coatings on light metals. Because, these coating scan present high hardness and continuous barriers, it can offers good protection against abrasion, corrosion and heat as well as electrical insulation. The EPP treatments were carried out under a hybrid voltage of AC 200V (50Hz) combined with DC 260V power supply.


2021 ◽  
Author(s):  
Joann Whalen

Abstract Horticulture involves growing crops and ornamental plants in indoor and outdoor environments. Horticultural crops include food crops such as vegetables and fruits (including tree fruits, small fruits and grapes), as well as nut- and seed-bearing plants, herbs and spices. Many non-food crops are also managed by horticulturalists, including medicinal plants, tobacco, hemp, ornamental plants and flowers. Horticultural crops grow naturally in temperate, sub-tropical and tropical climates of the world, although many of these crops are sufficiently robust that they can be grown in any suitable controlled environment. In 2015, astronauts on the International Space Station grew, harvested and ate red romaine lettuce from their VEGGIE system (Vegetable Production System), which has successfully produced lettuce, Swiss chard, radishes, Chinese cabbage and peas in simulated space environments. The VEGGIE is equipped with adequate lighting, water and nutrients to grow vegetables, relying on the space station's cabin environment for temperature and pressure control, and as a source of carbon dioxide for plant growth (NASA, 2016). Most horticultural crops are planted in soil, although modern cultivation techniques include other media, such as peat-based soil, compost, and inert substrates such as rockwool. A suitable growing media must provide anchorage and stability for the plant roots, considering the diverse life histories of horticultural crops. For example, plants that complete their life cycle in one (annual) or two (biennial) growing seasons does not produce the extensive, deep root system of a woody perennial that lives for several decades. Without adequate anchorage, shrubs and trees are vulnerable to blow down in wind-storms if their roots are in loose, fluid soils or if the plant has a shallow root system on a rocky strata close to the surface. Wind rocking of a poorly-anchored seedling can lead to fine roots breakage and root system detachment from soil, causing the plant to tilt. Soil management refers to the way that soils are cultivated to support horticultural crop growth. Actively growing roots need oxygen for their metabolic function, so the soil must have a crumbly, porous structure that allows for gas exchange with the atmosphere. The porous soil structure permits oxygen diffusion to the root zone, and for carbon dioxide respired by the roots to leave the soil environment. Since plants roots are responsible for obtaining most of the water required for metabolic functions and cooling leaf surfaces, the soil must retain and supply water to the roots while avoiding waterlogging, which inhibits root functions. Soil also provides many essential plant nutrients for crop growth, such as nitrogen, phosphorus, potassium, calcium, magnesium, sulfur and micronutrients (boron, iron, copper, manganese, zinc, chloride, molybdenum and nickel). Nutrient uptake in the root system is facilitated by plant interactions with soil-dwelling microorganisms, both free-living and symbiotic, which are abundant in the root zone. Good soil management is essential to produce nutritious, high yielding food and to support the growth of non-food crops like herbaceous and woody ornamentals. Soil management specialists are responsible for maintaining the soil physical integrity, its chemical balance and soil microbial life necessary for growing horticultural crops.


Author(s):  
Petr Salaš

Reserve, slow-release fertilizers (SRF) enable to simplify the whole system of plant nutrition and fertilisation. Tabletted fertilizers of the Silvamix series represent a prospective product of Czech provenience. At our university, these fertilizers have been tested and used since the year 1991. Ornamental woody species grown in containers were investigated in two stages. Experiments with ornamental plants were established using one-year-old cuttings and seedlings of the following deciduous and evergreen woody species:Cotoneaster dammeri Skogholm,Berberis thunbergii,Potentilla fruticosa Snowflake,Ligustrum vulgare AtrovirensandPicea omorika. After planting into containers, fertilizers in the dose of 1 tablet (i.e. 10 g) per litre of substrate were applied either to roots level or on the soil surface in the container. Silvamix in the dose of 5 g.l-1was used as the tested fertilizer in the second stage. It was applied during the planting in the form of tablets and/or a powder. Control plants were fertilized in the course of growing season using a common agricultural fertilizer Cererit Z. The annual plants increments were measured. These experiments demonstrated a long-term optimum effect of this product on woody species and an equal quality and efficiency of its tabletted and powdered forms.


2021 ◽  
Vol 15 (4) ◽  
pp. 504-509
Author(s):  
Imre Kiss

The objectives of this research is to study and understand the nodulizing of ductile iron using in-ladle treatment process. Among the more common nodulizing agents is magnesium (Mg) which is conventionally added to the cast iron by combining suitable alloys of one or both of these elements with molten cast iron. Depending on the characteristics of each master alloy used as nodulizer, different treatment methods and techniques are used, among these, the most widely used being in-ladle, in-mould, and flow-through, the first being the most used. This research deals with the parameters, that affect the quality of ductile iron produced using in-ladle treatment process. The parameters involved are the percentage of magnesium–ferrosilicon (Fe–Si–Mg) used and the nodulizing technique. In-ladle treatment used consists of a deep pocket into the bottom of ladle, in which magnesium–ferrosilicon is placed into it together with a steel scrap barrier (steel sheets) or calcium carbide. This study, take into account, the degree of assimilation of magnesium, which shows the performance of the chosen process, depending on the nodulizer used and the temperature of the treatment.


Sign in / Sign up

Export Citation Format

Share Document