Pilot study of UASB process treating PTA manufacturing wastewater

1997 ◽  
Vol 36 (6-7) ◽  
pp. 73-82 ◽  
Author(s):  
Sheng-Shung Cheng ◽  
Chiou-Yuan Ho ◽  
Jer-Horng Wu
Keyword(s):  
Acetic Acid ◽  
Pilot Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
High Concentration ◽  
Refractory Component ◽  
Anaerobic Biodegradability ◽  
Volumetric Loading ◽  
Anaerobic Sludge Blanket

A pilot-scale upflow anaerobic sludge blanket (UASB) reactor was employed to treat the wastewater of a purified-terephthalic-acid (PTA) manufacturing factory. The performance of UASB reactor in terms of COD removal was achieved 62% at the volumetric loading rate of 2.93 kg COD / m3/day. One of the major constituents, p-toluic acid in PTA wastewater was the refractory component due to the methyl substituent on the aromatic ring, which restricted the biodegradation performance. Moreover, from our study, it was surprising that high concentration of acetic acid would retard the degradation of aromatics in the sludge bed. A control strategy of acetic acid level in the sludge bed was suggested during the start-up period. Comparison of the anaerobic biodegradability of aromatic substituents in PTA wastewater was concluded as the following sequence: –COOH > –CHO ≥ –CH3 in terms of the derivative functional groups based on the benzoic acid. Observation of bacterial population of the sludge granules showed high diversity of syntrophic structure on the biogranular surface as well as acetoclastic methanogens.

Treatment of Sweet Potato Starch Wastewater with UASB

2013 ◽  
Vol 699 ◽  
pp. 234-237
Author(s):  
Hong Fen Wang
Keyword(s):  
Sweet Potato ◽  
Potato Starch ◽  
Granular Sludge ◽  
Pilot Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Starch Wastewater ◽  
Sweet Potato Starch ◽  
Anaerobic Sludge Blanket

A pilot-scale upflow anaerobic sludge blanket (UASB) reactor was used to study the sweet potato starch wastewater treatment performance and its influencing factors. Under normal temperature conditions, the operating parameters of sweet potato starch wastewater from UASB treatment was optimized, and the better conditions from different influent CODcr concentrations was obtained. The impacts from trace elements MgCl2, FeCl2, CoCl2, NiCl2 on physiological and biochemical characteristics of anaerobic granular sludge was developed.

Herbal pharmaceutical wastewater treatment by a pilot scale upflow anaerobic sludge blanket (UASB) reactor

2009 ◽  
Vol 59 (11) ◽  
pp. 2265-2272 ◽  
Author(s):  
S. Satyanarayan ◽  
A. Karambe ◽  
A. P. Vanerkar
Keyword(s):  
Biogas Production ◽  
Oxygen Demand ◽  
High Strength ◽  
Cost Effective ◽  
Pilot Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Reactor Performance ◽  
Anaerobic Sludge Blanket

Herbal pharmaceutical industry has grown tremendously in the last few decades. As such, literature on the treatment of this wastewater is scarce. Water pollution control problems in the developing countries need to be solved through application of cost effective aerobic/anaerobic biological systems. One such system—the upflow anaerobic sludge blanket (UASB) process which is known to be cost effective and where by-product recovery was also feasible was applied for treatment of a high strength wastewater for a period of six months in a pilot scale upflow anaerobic sludge blanket (UASB) reactor with a capacity of 27.44 m3. Studies were carried out at various organic loading rates varying between 6.26 and 10.33 kg COD/m3/day and hydraulic retention time (HRT) fluctuating between 33 and 43 hours. This resulted in chemical oxygen demand (COD), biochemical oxygen demand (BOD) and suspended solids (SS) removal in the range of 86.2%–91.6%, 90.0%–95.2% and 62.6%–68.0% respectively. The biogas production varied between 0.32–0.47 m3/kg COD added. Sludge from different heights of UASB reactor was collected and subjected to scanning electron microscopy (SEM). The results indicated good granulation with efficient UASB reactor performance.

Evaluation of sludge properties in a pilot-scale UASB reactor for sewage treatment in a temperate region

2011 ◽  
Vol 64 (10) ◽  
pp. 1959-1966 ◽  
Author(s):  
K. Syutsubo ◽  
W. Yoochatchaval ◽  
I. Tsushima ◽  
N. Araki ◽  
K. Kubota ◽  
...  
Keyword(s):  
Suspended Solids ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Methanogenic Activity ◽  
Working Volume ◽  
Anaerobic Sludge Blanket

In this study, continuous operation of a pilot-scale upflow anaerobic sludge blanket (UASB) reactor for sewage treatment was conducted for 630 days to investigate the physical and microbial characteristics of the retained sludge. The UASB reactor with a working volume of 20.2 m3 was operated at ambient temperature (16–29 °C) and seeded with digested sludge. After 180 days of operation, when the sewage temperature had dropped to 20 °C or lower, the removal efficiency of both total suspended solids (TSS) and total biochemical oxygen demand (BOD) deteriorated due to washout of retained sludge. At low temperature, the cellulose concentration of the UASB sludge increased owing to the rate limitation of the hydrolytic reaction of suspended solids in the sewage. However, after an improvement in sludge retention (settleability and concentration) in the UASB reactor, the process performance stabilized and gave sufficient results (68% of TSS removal, 75% of total BOD removal) at an hydraulic retention time (HRT) of 9.7 h. The methanogenic activity of the retained sludge significantly increased after day 246 due to the accumulation of Methanosaeta and Methanobacterium following the improvement in sludge retention in the UASB reactor. Acid-forming bacteria from phylum Bacteroidetes were detected at high frequency; thus, these bacteria may have an important role in suspended solids degradation.

Combined UASB reactor and DAF/BF/anoxic/aerobic process for the removal of high-concentration organic matter and nutrients from slurry-type swine waste

2004 ◽  
Vol 49 (5-6) ◽  
pp. 199-205 ◽  
Author(s):  
B.U. Kim ◽  
C.H. Won ◽  
J.M. Rim
Keyword(s):  
Loading Rate ◽  
Removal Rate ◽  
Upflow Anaerobic Sludge Blanket ◽  
Anaerobic Sludge ◽  
Swine Waste ◽  
High Concentration ◽  
Dissolved Air Flotation ◽  
Volumetric Loading ◽  
Anaerobic Sludge Blanket ◽  
Dissolved Air

This research aimed to effectively remove high-concentration organic matter and nutrients from slurry-type swine waste using a combined upflow anaerobic sludge blanket reactor with the dissolved air flotation/aerobic submerged biofilm/anoxic/aerobic process. The upflow anaerobic sludge blanket reactor was operated at an organics volumetric loading rate of 3.2Ð6.1 kg COD/m3/day, and the removal rates of COD were 53.9-65.5%. The removal rate of COD of the overall process was more than 99%. In the aerobic submerged biofilm, over 95% of ammonium nitrogen was removed at a volumetric loading rate of 0.08-0.16 kg NH4+-N/m3/day. The specific denitrification rate was 0.257 g NO3-N/g MLVSS/day and the removal rate of total nitrogen was 86.7%. Phosphorus was removed by flocculation in the dissolved air flotation process, and 0.16 g of PO4-P was removed by 1 g of ferric ion.

scholarly journals Microbial Removal of Pb(II) Using an Upflow Anaerobic Sludge Blanket (UASB) Reactor

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 512
Author(s):  
Jeremiah Chimhundi ◽  
Carla Hörstmann ◽  
Evans M. N. Chirwa ◽  
Hendrik G. Brink
Keyword(s):  
Treatment Process ◽  
Removal Rate ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Reduction Potentials ◽  
Oxidation Reduction ◽  
Anaerobic Sludge Blanket ◽  
Microbial Removal ◽  
Maximum Removal

The main objective of this study was to achieve the continuous biorecovery and bioreduction of Pb(II) using an industrially obtained consortia as a biocatalyst. An upflow anaerobic sludge blanket reactor was used in the treatment process. The bioremediation technique that was applied made use of a yeast extract as the microbial substrate and Pb(NO3)2 as the source of Pb(II). The UASB reactor exhibited removal efficiencies of between 90 and 100% for the inlet Pb concentrations from 80 to 2000 ppm and a maximum removal rate of 1948.4 mg/(L·d) was measured. XRD and XPS analyses of the precipitate revealed the presence of Pb0, PbO, PbS and PbSO4. Supporting experimental work carried out included growth measurements, pH, oxidation–reduction potentials and nitrate levels.

KINETIC MODELS FOR PREDICTION OF COD EFFLUENT FROM UPFLOW ANAEROBIC SLUDGE BLANKET (UASB) REACTOR FOR CANNERY SEAFOOD WASTEWATER TREATMENT

2016 ◽  
Vol 78 (5-6) ◽  
Author(s):  
Sunwanee Jijai ◽  
Chairat Siripatana ◽  
Sompong O-Thong ◽  
Norli Ismail
Keyword(s):  
Palm Oil ◽  
Kinetic Models ◽  
Second Order ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Substrate Removal ◽  
Reactor Kinetic ◽  
Palm Oil Mill ◽  
Anaerobic Sludge Blanket

The three identical lab-scale upflow anaerobic sludge blanket (UASB) reactors were operated continuously for treating cannery seafood wastewater at seven hydraulic retention times (HRTs) of 5, 4, 3, 2, 1, 0.5 and 0.25 days. The different of granule sizes from three sources: a cassava factory (CS), a seafood factory (SS), and a palm oil mill (PS), average sizes in the range 1.5-1.7, 0.7-1.0 and 0.1-0.2 mm respectively were used as inocula for anaerobic digestion. The UASB-R1 used only granules from seafood factory (R1-SS), the UASB-R2 used mixed granules from seafood with cassava factory (R2-SS+CS) and the UASB-R3 used mixed granules from seafood factory with palm oil mill (R3-SS+PS). In this study selected mathematical models including Monod, Contois, Grau second-order and modified Stover-Kicannon kinetic models were applied to determine the substrate removal kinetics of UASB reactor. Kinetic parameters were determined through linear regression using experimental data obtained from the steady-state experiment and subsequently used to predict effluent COD. The results showed that Grau second-order and modified Stover-Kicannon kinetic models were more suitable than that of others for predicting the effluent COD, with high the correlation coefficient (R2). In addition, the UASB-R2 from mixed granules with cassava factory (SS+CS) gave the best performance and highest coefficient value.

Sign in / Sign up

Export Citation Format

Share Document