Full scale experience with the BIOCEL process

2000 ◽  
Vol 41 (3) ◽  
pp. 299-304 ◽  
Author(s):  
E. ten Brummeler

The BIOCEL process is a mesophilic dry anaerobic batch digestion system for solid organic wastes. In the BIOCEL process organic solid wastes, such as source separated organic fraction of MSW (biowaste) is converted into enriched compost and biogas. In the process net energy production is achieved by converting the biogas to heat and power with a heat-electric power production unit. In September 1997 the first full scale plant is started-up in Lelystad, The Netherlands. This plant is processing 50,000 tons of biowaste (organic fraction of MSW from source separation) per year. The plant has a net energy production and therefore contributes to prevention of CO2 emissions from fossil fuels. In the BIOCEL-system the several compost fractions are produced with a “wet” separation process. During the wet separation sand and contaminants are removed. An important aspect of compost quality is the absence of several types of pathogens. It appears that anaerobic digestion with the BIOCEL- process results in complete inactivation of several important groups of plant and animal pathogens. The mechanism that causes the inactivation is not yet fully understood, but the relatively high Volatile Fatty Acids concentration during the first two weeks of the digestion process might presumably be the key factor.

2008 ◽  
Vol 23 (1) ◽  
pp. 30-37 ◽  
Author(s):  
N. Halberg ◽  
R. Dalgaard ◽  
J.E. Olesen ◽  
T. Dalgaard

AbstractOrganic farming (OF) principles include the idea of reducing dependence of fossil fuels, but little has been achieved on this objective so far in Danish OF. Energy use and greenhouse gas (GHG) emissions from an average 39 ha cash crop farm were calculated and alternative crop rotations for bio-energy production were modeled. Growing rapeseed on 10% of the land could produce bio-diesel to replace 50–60% of the tractor diesel used on the farm. Increasing grass-clover area to 20% of the land and using half of this yield for biogas production could change the cash crop farm to a net energy producer, and reduce GHG emissions while reducing the overall output of products only marginally. Increasing grass-clover area would improve the nutrient management on the farm and eliminate dependence on conventional pig slurry if the biogas residues were returned to cash crop fields.


2005 ◽  
Vol 52 (1-2) ◽  
pp. 217-222 ◽  
Author(s):  
Å. Nordberg ◽  
M. Edström

The biological and technical performance during co-digestion of energy crops and the source-sorted organic fraction of municipal solid waste has been investigated at laboratory and pilot scale. A 50:50 (TS-based) mixture of energy crops and organic waste reached a loading rate of 6.0 gVS L−1d−1 with a methane yield of 0.33–0.38 L gVS−1, while a 80:20 mixture showed elevated levels of volatile fatty acids at 5.5 gVS L−1d−1 The better performance of the 50:50 mixture can partly be explained by a better nutritional composition. Mincing the ley crop reduced viscosity and reduced problems with fibre floating and scum-blanket formation. The electricity consumed for mincing and stirring at a full-scale plant corresponds to ca 3% of the energy produced. Calculations of the costs for full-scale plants indicate that the price of the up-graded biogas has to be at least 0.078 Euro/kWh in order to balance the costs.


2013 ◽  
pp. 109-128 ◽  
Author(s):  
C. Rühl

This paper presents the highlights of the third annual edition of the BP Energy Outlook, which sets out BP’s view of the most likely developments in global energy markets to 2030, based on up-to-date analysis and taking into account developments of the past year. The Outlook’s overall expectation for growth in global energy demand is to be 36% higher in 2030 than in 2011 and almost all the growth coming from emerging economies. It also reflects shifting expectations of the pattern of supply, with unconventional sources — shale gas and tight oil together with heavy oil and biofuels — playing an increasingly important role and, in particular, transforming the energy balance of the US. While the fuel mix is evolving, fossil fuels will continue to be dominant. Oil, gas and coal are expected to converge on market shares of around 26—28% each by 2030, and non-fossil fuels — nuclear, hydro and renewables — on a share of around 6—7% each. By 2030, increasing production and moderating demand will result in the US being 99% self-sufficient in net energy. Meanwhile, with continuing steep economic growth, major emerging economies such as China and India will become increasingly reliant on energy imports. These shifts will have major impacts on trade balances.


2008 ◽  
Vol 3 (3) ◽  
Author(s):  
M. B. Fernandes ◽  
M. C. Almeida ◽  
A. G. Henriques

Desalination technologies provide an alternative for potable water production, having significant potential for application where fresh water scarcity exists. Potential benefits have to be balanced with other factors, such as high costs, high energy consumption, and significant environmental impacts, for the understanding of real risks and gains of desalination within the context of integrated water resources management. Multiple factors can be considered when analysing the viability of a desalination project but often a limited approach is used. The complexity in the analysis lies in finding the alternatives that obey to multiple objectives (e.g. reduced environmental impact, social acceptance, less cost associated). In this paper, development of a methodology based on multiple criteria decision support system for the evaluation and ranking the potential of desalination technologies is described and applied to a Portuguese case study. Relevant factors to the selection of desalination technologies were identified using SWOT analysis and the MACBETH (Measuring Attractiveness by a Categorical Based Evaluation Technique) approach was applied. Technical alternatives considered include reverse osmosis and multi-effect desalination (MED), together with energy production by fossil fuels or solar energy. Production of water by conventional approaches was also considered. Results, for non-economic benefits, show higher score for MED solar but, in the cost-benefit analysis, conventional methods of water production have higher ranking since costs of renewable energies are not yet competitive. However, even if not preferred in economic terms, desalination is ranked significantly above the conventional approaches for non-economic criteria.


2021 ◽  
Vol 13 (13) ◽  
pp. 7025
Author(s):  
Shiva Gorjian ◽  
Behnam Hosseingholilou ◽  
Laxmikant D. Jathar ◽  
Haniyeh Samadi ◽  
Samiran Samanta ◽  
...  

The food industry is responsible for supplying the food demand of the ever-increasing global population. The food chain is one of the major contributors to greenhouse gas (GHG) emissions, and global food waste accounts for one-third of produced food. A solution to this problem is preserving crops, vegetables, and fruits with the help of an ancient method of sun drying. For drying agricultural and marine products, several types of dryers are also being developed. However, they require a large amount of energy supplied conventionally from pollutant energy sources. The environmental concerns and depletion risks of fossil fuels persuade researchers and developers to seek alternative solutions. To perform drying applications, sustainable solar power may be effective because it is highly accessible in most regions of the world. Greenhouse dryers (GHDs) are simple facilities that can provide large capacities for drying agricultural products. This study reviews the integration of GHDs with different solar technologies, including photovoltaic (PV), photovoltaic-thermal (PVT), and solar thermal collectors. Additionally, the integration of solar-assisted greenhouse dryers (SGHDs) with heat pumps and thermal energy storage (TES) units, as well as their hybrid configuration considering integration with other renewable energy sources, is investigated to improve their thermal performance. In this regard, this review presents and discusses the most recent advances in this field. Additionally, the economic analysis of SGHDs is presented as a key factor to make these sustainable facilities commercially available.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1011
Author(s):  
Bartłomiej Bajan ◽  
Joanna Łukasiewicz ◽  
Agnieszka Poczta-Wajda ◽  
Walenty Poczta

The projected increase in the world’s population requires an increase in the production of edible energy that would meet the associated increased demand for food. However, food production is strongly dependent on the use of energy, mainly from fossil fuels, the extraction of which requires increasing input due to the depletion of the most easily accessible deposits. According to numerous estimations, the world’s energy production will be dependent on fossil fuels at least to 2050. Therefore, it is vital to increase the energy efficiency of production, including food production. One method to measure energy efficiency is the energy return on investment (EROI), which is the ratio of the amount of energy produced to the amount of energy consumed in the production process. The literature lacks comparable EROI calculations concerning global food production and the existing studies only include crop production. The aim of this study was to calculate the EROI of edible crop and animal production in the long term worldwide and to indicate the relationships resulting from its changes. The research takes into account edible crop and animal production in agriculture and the direct consumption of fossil fuels and electricity. The analysis showed that although the most underdeveloped regions have the highest EROI, the production of edible energy there is usually insufficient to meet the food needs of the population. On the other hand, the lowest EROI was observed in highly developed regions, where production ensures food self-sufficiency. However, the changes that have taken place in Europe since the 1990s indicate an opportunity to simultaneously reduce the direct use of energy in agriculture and increase the production of edible energy, thus improving the EROI.


Author(s):  
Kau-Fui Vincent Wong ◽  
Guillermo Amador

As society continues advancing into the future, more energy is required to supply the increasing population and energy demands. Unfortunately, traditional forms of energy production through the burning of carbon-based fuels are dumping harmful pollutants into the environment, resulting in detrimental, and possibly irreversible, effects on our planet. The burning of coal and fossil fuels provides energy at the least monetary cost for countries like the US, but the price being paid through their negative impact of our atmosphere is difficult to quantify. A rapid shift to clean, alternative energy sources is critical in order to reduce the amount of greenhouse gas emissions. For alternative energy sources to replace traditional energy sources that produce greenhouse gases, they must be capable of providing energy at equal or greater rates and efficiencies, while still functioning at competitive prices. The main factors hindering the pursuit of alternative sources are their high initial costs and, for some, intermittency. The creation of electrical energy from natural sources like wind, water, and solar is very desirable since it produces no greenhouse gases and makes use of renewable sources—unlike fossil fuels. However, the planning and technology required to tap into these sources and transfer energy at the rate and consistency needed to supply our society comes at a higher price than traditional methods. These high costs are a result of the large-scale implementation of the state-of-the-art technologies behind the devices required for energy cultivation and delivery from these unorthodox sources. On the other hand, as fossil fuel sources become scarcer, the rising fuel costs drive overall costs up and make traditional methods less cost effective. The growing scarcity of fossil fuels and resulting pollutants stimulate the necessity to transition away from traditional energy production methods. Currently, the most common alternative energy technologies are solar photovoltaics (PVs), concentrated solar power (CSP), wind, hydroelectric, geothermal, tidal, wave, and nuclear. Because of government intervention in countries like the US and the absence of the need to restructure the electricity transmission system (due to the similarity in geographical requirements and consistency in power outputs for nuclear and traditional plants), nuclear energy is the most cost competitive energy technology that does not produce greenhouse gases. Through the proper use of nuclear fission electricity at high efficiencies could be produced without polluting our atmosphere. However, the initial capital required to erect nuclear plants dictates a higher cost over traditional methods. Therefore, the government is providing help with the high initial costs through loan guarantees, in order to stimulate the growth of low-emission energy production. This paper analyzes the proposal for the use of nuclear power as an intermediate step before an eventual transition to greater dependence on energy from wind, water, and solar (WWS) sources. Complete dependence on WWS cannot be achieved in the near future, within 20 years, because of the unavoidable variability of these sources and the required overhaul of the electricity transmission system. Therefore, we look to nuclear power in the time being to help provide predictable power as a means to reduce carbon emissions, while the other technologies are refined and gradually implemented in order to meet energy demand on a consistent basis.


Molecules ◽  
2018 ◽  
Vol 23 (8) ◽  
pp. 2006 ◽  
Author(s):  
E. Hosseini Koupaie ◽  
T. Johnson ◽  
C. Eskicioglu

This paper presents results for a comprehensive study that compares the performance of three electricity-based thermal pretreatment methods for improving the effectiveness of anaerobic digestion (AD) to process municipal wastewater sludge. The study compares thermal pretreatment using conventional heating (CH), microwave (MW), and radio frequency (RF) heating techniques. The effectiveness of the pretreatment methods was assessed in terms of chemical oxygen demand (COD) and biopolymers solubilization, AD bioenergy production, input electrical energy, and overall net energy production of the sequential pretreatment/AD process. The heating applicators for the bench-scale testing consisted of a custom-built pressure-sealed heating vessel for CH experiments, an off-the-shelf programmable MW oven operating at a frequency of 2.45 GHz for MW heating experiments, and a newly developed 1 kW RF heating system operating at a frequency of 13.56 MHz for RF heating experiments. Under identical thermal profiles, all three thermal pretreatment methods achieved similar sludge disintegration in terms of COD and biopolymer solubilization as well as AD bioenergy production (p-value > 0.05). According to the energy assessment results, the application of CH and MW pretreatments resulted in overall negative energy production, while positive net energy production was obtained through the sequential pretreatment/AD process utilizing RF pretreatment.


2019 ◽  
Vol 232 ◽  
pp. 264-270 ◽  
Author(s):  
Alessandra Cesaro ◽  
Anna Conte ◽  
Vincenzo Belgiorno ◽  
Antonietta Siciliano ◽  
Marco Guida

Sign in / Sign up

Export Citation Format

Share Document