A micromachined electrochemical sensor for free chlorine monitoring in drinking water

2006 ◽  
Vol 53 (4-5) ◽  
pp. 403-410 ◽  
Author(s):  
A. Mehta ◽  
H. Shekhar ◽  
S.H. Hyun ◽  
S. Hong ◽  
H.J. Cho
Keyword(s):  
Drinking Water ◽  
Low Cost ◽  
Free Chlorine ◽  
Stable Operation ◽  
Chlorination Process ◽  
Transparent Substrate ◽  
On Line ◽  
Flow Through ◽  
Drinking Water Purification ◽  
On Chip

In this work, we designed, fabricated and tested a disposable, flow-through amperometric sensor for free chlorine determination in water. The sensor is based on the principle of an electrochemical cell. The substrate, as well as the top microfluidic layer, is made up of a polymer material. The advantages include; (a) disposability from low cost; (b) stable operation range from three-electrode design; (c) fluidic interconnections that provide on line testing capabilities; and (d) transparent substrate which provides for future integration of on-chip optics. The sensor showed a good response and linearity in the chlorine concentration ranging from 0.3 to 1.6 ppm, which applies to common chlorination process for drinking water purification.

A low-cost smartphone controlled portable system with accurately confined on-chip 3D electrodes for flow-through cell electroporation

2020 ◽  
Vol 134 ◽  
pp. 107486
Author(s):  
Chao Han ◽  
Xiwen He ◽  
Jie Wang ◽  
Lingeng Gao ◽  
Guang Yang ◽  
...  
Keyword(s):  
Low Cost ◽  
Cell Electroporation ◽  
3D Electrodes ◽  
Portable System ◽  
Flow Through ◽  
On Chip

Assessing the performances of on-line analyzers can greatly improve free chlorine monitoring in drinking water

2022 ◽  
Author(s):  
Nathalie Guigues ◽  
Julien Chabrol ◽  
Pierre Lavaud ◽  
Sandrine Raveau ◽  
Jérémie Magar ◽  
...  
Keyword(s):  
Drinking Water ◽  
Free Chlorine ◽  
On Line

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor †

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Microfluidic Device ◽  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
On Chip ◽  
Working Parameters ◽  
Auto Fluorescence

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.

scholarly journals Experimental Setting for Applying Mechanical Stimuli to Study the Endothelial Response of Ex Vivo Vessels under Realistic Pathophysiological Environments

Life ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 671
Author(s):  
Ana Osuna ◽  
Anna Ulldemolins ◽  
Hector Sanz-Fraile ◽  
Jorge Otero ◽  
Núria Farré ◽  
...  
Keyword(s):  
Ex Vivo ◽  
Low Cost ◽  
Technical Information ◽  
Rabbit Aorta ◽  
Pressure Waveform ◽  
Mechanical Stimuli ◽  
Experimental Setting ◽  
Endothelial Response ◽  
Flow Through ◽  
Open Source Hardware

This paper describes the design, construction and testing of an experimental setting, making it possible to study the endothelium under different pathophysiological conditions. This novel experimental approach allows the application of the following stimuli to an ex vivo vessel in a physiological bath: (a) a realistic intravascular pressure waveform defined by the user; (b) shear stress in the endothelial layer since, in addition to the pressure waveform, the flow through the vessel can be independently controlled by the user; (c) conditions of hypo/hyperoxia and hypo/hypercapnia in an intravascular circulating medium. These stimuli can be applied alone or in different combinations to study possible synergistic or antagonistic effects. The setting performance is illustrated by a proof of concept in an ex vivo rabbit aorta. The experimental setting is easy to build by using very low-cost materials widely available. Online Supplement files provide all the technical information (e.g., circuits, codes, 3D printer drivers) following an open-source hardware approach for free replication.

scholarly journals Immobilization of Pseudomonas aeruginosa static biomass on eggshell powder for on-line preconcentration and determination of Cr (VI)

2020 ◽  
Vol 18 (1) ◽  
pp. 303-313 ◽  
Author(s):  
Aamir Rasheed ◽  
Tahseen Ghous ◽  
Sumaira Mumtaz ◽  
Muhammad Nadeem Zafar ◽  
Kalsoom Akhter ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Low Cost ◽  
Colorimetric Detection ◽  
Time Flow ◽  
Highly Sensitive ◽  
Glass Column ◽  
On Line ◽  
Preconcentration Time ◽  
Ultra Trace

AbstractIn the present work, a novel continuous flow system (CFS) is developed for the preconcentration and determination of Cr (VI) using Pseudomonas aeruginosa static biomass immobilized onto an effective and low-cost solid support of powdered eggshells. A mini glass column packed with the immobilized biosorbent is incorporated in a CFS for the preconcentration and determination of Cr (VI) from aqueous solutions. The method is based on preconcentration, washing and elution steps followed by colorimetric detection with 1,5-diphenyl carbazide in sulphuric acid. The effects of several variables such as pH, retention time, flow rate, eluent concentration and loaded volume are studied. Under optimal conditions, the CFS method has a linear range between 10 and 100 μg L-1 and a detection limit of 6.25 μg L-1 for the determination of Cr (VI). The sampling frequency is 10 samples per hour with a preconcentration time of 5 mins. Furthermore, after washing with a 0.1 M buffer (pH 3.0), the activity of the biosorbent is regenerated and remained comparable for more than 200 cycles. Scanning electron microscopy reveals a successful immobilization of biomass on eggshells powder and precipitation of Cr (VI) on the bacterial cell surface. The proposed method proves highly sensitive and could be suitable for the determination of Cr (VI) at an ultra-trace level.

Sign in / Sign up

Export Citation Format

Share Document