Bioremediation of a wine distillery wastewater using white rot fungi and the subsequent production of laccase

2007 ◽  
Vol 56 (2) ◽  
pp. 179-186 ◽  
Author(s):  
P.J. Strong ◽  
J.E. Burgess
Keyword(s):  
Biological Treatment ◽  
Oxygen Demand ◽  
White Rot Fungi ◽  
White Rot ◽  
White Rot Fungus ◽  
Laccase Production ◽  
Total Phenolic ◽  
Pycnoporus Cinnabarinus ◽  
Distillery Wastewater

The aim of this work was to ascertain whether a submerged culture of a white rot fungus could be used to treat distillery wastewater, and whether the compounds present in the wastewater would stimulate laccase production. Trametes pubescens MB 89, Ceriporiopsissubvermispora, Pycnoporus cinnabarinus and UD4 were screened for their ability for the bioremediation of a raw, untreated distillery wastewater as well as distillery wastewater that had been pretreated by polyvinylpolypyrrolidone. Suitability of each strain was measured as a function of decreasing the chemical oxygen demand (COD) and total phenolic compounds concentration and the colour of the wastewater, while simultaneously producing laccase in high titres. After screening, T. pubescens MB 89 was used further in flask cultures and attained 79±1.1% COD removal, 80±4.6% total phenols removal, 71±1.6% decrease in colour at an absorbance of 500 nm and increased the pH from 5.3 to near-neutral. Laccase activity in flask cultures peaked at 4,644±228 units/l, while the activity in a 50 l bubble lift reactor peaked at 12,966±71 units/l. Trametes pubescens MB 89 greatly improved the quality of a wastewater known for toxicity towards biological treatment systems, while simultaneously producing an industrially relevant enzyme.

Greener approach to substitute chemical reduction clearing process for fabric dyed with Foron Blue E-BL 150, Foron Rubine RD-GFL and Foron Brilliant Yellow S-6GL using indigenous resources

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Abdul Khalique ◽  
Shaukat Ali ◽  
Rasheed Ahmad Khera ◽  
Muhammad Asgher
Keyword(s):  
Chemical Reduction ◽  
Oxygen Demand ◽  
White Rot Fungi ◽  
Reduction Process ◽  
White Rot ◽  
Disperse Dyes ◽  
Brilliant Yellow ◽  
Color Strength ◽  
Significant Difference

Abstract Fabric dyed with disperse dyes followed a reduction clearing process (RCP)/chemical clearing process (CCP) to remove the unfixed dye from the fabric. In the clearing process, unfixed dyes and chemicals are discharged into streams. To combat this issue, an environment friendly approaches is explored that is a biological clearing using indigenous fungal strains of white-rot fungi (Pleurotus ostreatus and Ganoderma lucidum). In this context, fabrics dyed with three disperse dyes (Foron Blue E-BL 150, Foron Rubine RD-GFL and Foron Brilliant Yellow S-6GL) were considered. The fabric cleared with biological clearing process improved the quality of fabric versus chemically cleared fabric and among the tested strains, G. lucidum showed higher efficiency for color strength improvement. However, no significant difference in tensile and tear strength of all fabric samples was observed. The quality of effluents in clearing reduction process for three dyes was assessed and it was observed that water quality parameters including chemical oxygen demand (COD), total organic carbon (TOC), biological oxygen demand (BOD), total suspended solids (TSS), pH, dissolved oxygen (DO) and total dissolved solids (TDS) improved significantly and results revealed that the biological clearing approach can substitute chemical reduction clearing process for fabric dyed with dyes, which is greener and eco-friendly versus conventional processes to avoid unfixed dyes discharge in to water bodies.

The Onset of Lignin-Modifying Enzymes, Decrease of AOX and Color Removal by White-Rot Fungi Grown on Bleach Plant Effluents

1991 ◽  
Vol 24 (3-4) ◽  
pp. 189-198 ◽  
Author(s):  
V. P. Lankinen ◽  
M. M. Inkeröinen ◽  
J. Pellinen ◽  
A. I. Hatakka
Keyword(s):  
Lignin Peroxidase ◽  
Active Form ◽  
White Rot Fungi ◽  
Pulp Mill ◽  
Color Removal ◽  
Effluent Treatment ◽  
White Rot ◽  
White Rot Fungus ◽  
Lignin Peroxidases ◽  
Pulp Mill Effluents

Decrease of adsorbable organic chlorine (AOX) is becoming the most important criterion for the efficiency of pulp mill effluent treatment in the 1990s. Two methods, designated MYCOR and MYCOPOR which utilize the white-rot fungus Phanerochaete chrysosporium have earlier been developed for the color removal of pulp mill effluents, but the processes have also a capacity to decrease the amount of chlorinated organic compounds. Lignin peroxidases (ligninases) produced by P. chrvsosporium may dechlorinate chlorinated phenols. In this work possibilities to use selected white-rot fungi in the treatment of E1-stage bleach plant effluent were studied. Phlebia radiata. Phanerochaete chrvsosporium and Merulius (Phlebia) tremellosus were compared in shake flasks for their ability to produce laccase, lignin peroxidase(s) and manganese-dependent peroxidase(s) and to remove color from a medium containing effluent. Softwood bleaching effluents were treated by carrier-immobilized P. radiata in 2 1 bioreactors and a 10 1 BiostatR -fermentor. Dechlorination was followed using Cl ion and AOX determinations. All fungi removed the color of the effluent. In P. radiata cultivations AOX decrease was ca. 4 mg l−1 in one day. Apparent lignin peroxidase activities as determined by veratryl alcohol oxidation method were negligible or zero in a medium with AOX content of ca. 60 mg l−1, prepared using about 20 % (v/v) of softwood effluent. However, the purification of extracellular enzymes implied that large amounts of lignin peroxidases were present in the medium and, after the purification, in active form. Enzyme proteins were separated using anion exchange chromatography, and they were further characterized by electrophoresis (SDS-PAGE) to reveal the kind of enzymes that were present during AOX decrease and color removal. The most characteristic lignin peroxidase isoenzymes in effluent media were LiP2 and LiP3.

scholarly journals Identification of white rot fungus CP9 and its potential application in biopulping

2018 ◽  
Vol 14 (4) ◽  
pp. 721-726
Author(s):  
Nguyen Thi Hong Lien ◽  
Nguyen Van Hieu ◽  
Luong Thi Hong ◽  
Hy Tuan Anh ◽  
Phan Thi Hong Thao
Keyword(s):  
Rice Straw ◽  
Lignin Peroxidase ◽  
Paper Industry ◽  
Morphological Characteristics ◽  
White Rot Fungi ◽  
White Rot ◽  
White Rot Fungus ◽  
Wood Block ◽  
New Production ◽  
Cellulosic Fibers

Wood-rotting fungi represent an important component of forest ecosystems. Among them, white-rot fungi are the most efficient lignin degraders. Biopulping using white-rot fungi in pretreatment of the materials, is one of the solutions to overcome disadvantages of traditional production methods. Today, the isolation and screening of lignin degrading fungi capable for application in biopulping are of keen interest in Vietnam. The use of non–wood, plant fibres in pulp and paper industry, special, agricultural residuces such as rice and wheat straw, sugarcane baggase, cornstalks etc is the new production toward, potential, serving sustainable development. The fungus CP9, which possessed high ligninolytic activity, was identified and studied in pretreatment of rice straw for biopulping. The fruiting bodies of strain CP9 were effuse on trunk. The hymenium was porous and brown white with short tubes, the white mycelia penetrated wood block. The colony was off-white, blossom, irregularly circular. The mycelia were thick and closely bound together. Beside lignin, this fungus could degrade other substrates such as casein, carboxymethyl cellulose and starch. Biological and morphological characteristics of the fungus CP9 suggested its placement in subdivision Basidiomycota. Combined with the results of phylogenetic analysis, which showed 99% similarity of the fungus with species Leiotrametes lactinea, our strain was named as Leiotrametes lactinea CP9. This fungus could grow well on rice straw under solid state fermentation. Pretreatment of rice straw using L. lactinea CP9 was based on the activity of fungal lignin peroxidase and laccase. After 20 days, the residual enzyme activity was of 21.6 and 18.4 nkat/g material for lignin peroxidase and laccase, respectively. Pretreatment significantly improved the quality of straw, as lignin loss of 38% while cellulosic fibers were comparatively well preserved.

Lignocellulolytic activity of Pleurotus ostreatus under solid state fermentation using silage, stover, and cobs of maize

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3797-3807
Author(s):  
Magdah Ganash ◽  
Tarek M. Abdel Ghany ◽  
Mohamed A. Al Abboud ◽  
Mohamed M. Alawlaqi ◽  
Husam Qanash ◽  
...  
Keyword(s):  
Solid State ◽  
Incubation Period ◽  
Solid State Fermentation ◽  
Pleurotus Ostreatus ◽  
White Rot Fungi ◽  
Value Added ◽  
Extracellular Protein ◽  
White Rot ◽  
White Rot Fungus ◽  
Lignocellulosic Substrate

Lignocellulolytic white-rot fungi allow the bioconversion of agricultural wastes into value-added products that are used in a myriad of applications. The aim of this work was to use corn residues (Zea mays L.) to produce valuable products under solid-state fermentation (SSF) with Pleurotus ostreatus. White-rot fungus P. ostreatus was isolated from maize silage (MS) and thereafter it was inoculated on MS as substrate and compared with maize stover (MSt) and maize cobs (MC) to determine the best lignocellulosic substrate for the production of lignocellulolytic enzymes and extracellular protein. The MS gave the highest productivity of CMCase (368.2 U/mL), FPase (170.5 U/mL), laccase (11.4 U/mL), and MnPase (6.6 U/mL). This is compared to productivity on MSt of 222 U/mL, 50.2 U/mL, 4.55 U/mL, and 2.57 U/mL, respectively; and productivity on MC at the same incubation period as 150.5 U/mL, 48.2 U/mL, 3.58 U/mL, and 2.5 U/mL, respectively. The levels of enzyme production declined with increasing incubation period after 15 and 20 days using MS and MC, respectively, as substrates. Maximum liberated extracellular protein content (754 to 878 µg/mL) was recorded using MS, while a low amount (343 to 408 µg/mL) was liberated with using MSt and MC.

scholarly journals Accelerating the Biodegradation of High-Density Polyethylene (HDPE) Using Bjerkandera adusta TBB-03 and Lignocellulose Substrates

2019 ◽  
Vol 7 (9) ◽  
pp. 304 ◽  
Author(s):  
Bo Ram Kang ◽  
Soo Bin Kim ◽  
Hyun A Song ◽  
Tae Kwon Lee
Keyword(s):  
High Density Polyethylene ◽  
Amorphous Structure ◽  
High Density ◽  
Wood Chips ◽  
White Rot ◽  
Organic Polymer ◽  
White Rot Fungus ◽  
Laccase Production ◽  
Bjerkandera Adusta ◽  
Emerging Pollutant

High-density polyethylene (HDPE) is a widely used organic polymer and an emerging pollutant, because it is very stable and nonbiodegradable. Several fungal species that produce delignifying enzymes are known to be promising degraders of recalcitrant polymers, but research on the decomposition of plastics is scarce. In this study, white rot fungus, Bjerkandera adusta TBB-03, was isolated and characterized for its ability to degrade HDPE under lignocellulose substrate treatment. Ash (Fraxinus rhynchophylla) wood chips were found to stimulate laccase production (activity was > 210 U/L after 10 days of cultivation), and subsequently used for HDPE degradation assay. After 90 days, cracks formed on the surface of HDPE samples treated with TBB-03 and ash wood chips in both liquid and solid states. Raman analysis showed that the amorphous structure of HDPE was degraded by enzymes produced by TBB-03. Overall, TBB-03 is a promising resource for the biodegradation of HDPE, and this work sheds light on further applications for fungus-based plastic degradation systems.

scholarly journals A Novel Approach in Crude Enzyme Laccase Production and Application in Emerging Contaminant Bioremediation

Processes ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 648
Author(s):  
Luong N. Nguyen ◽  
Minh T. Vu ◽  
Md Abu Hasan Johir ◽  
Nirenkumar Pathak ◽  
Jakub Zdarta ◽  
...  
Keyword(s):  
Steroid Hormones ◽  
Liquid Culture ◽  
Emerging Contaminants ◽  
White Rot Fungi ◽  
Enzyme Concentration ◽  
Crude Enzyme ◽  
White Rot ◽  
Laccase Production ◽  
Solid Culture ◽  
Novel Approach

Laccase enzyme from white-rot fungi is a potential biocatalyst for the oxidation of emerging contaminants (ECs), such as pesticides, pharmaceuticals and steroid hormones. This study aims to develop a three-step platform to treat ECs: (i) enzyme production, (ii) enzyme concentration and (iii) enzyme application. In the first step, solid culture and liquid culture were compared. The solid culture produced significantly more laccase than the liquid culture (447 vs. 74 µM/min after eight days), demonstrating that white rot fungi thrived on a solid medium. In the second step, the enzyme was concentrated 6.6 times using an ultrafiltration (UF) process, resulting in laccase activity of 2980 µM/min. No enzymatic loss due to filtration and membrane adsorption was observed, suggesting the feasibility of the UF membrane for enzyme concentration. In the third step, concentrated crude enzyme was applied in an enzymatic membrane reactor (EMR) to remove a diverse set of ECs (31 compounds in six groups). The EMR effectively removed of steroid hormones, phytoestrogen, ultraviolet (UV) filters and industrial chemical (above 90%). However, it had low removal of pesticides and pharmaceuticals.

scholarly journals Induction of Extracellular Hydroxyl Radical Production by White-Rot Fungi through Quinone Redox Cycling

2009 ◽  
Vol 75 (12) ◽  
pp. 3944-3953 ◽  
Author(s):  
Víctor Gómez-Toribio ◽  
Ana B. García-Martín ◽  
María J. Martínez ◽  
Ángel T. Martínez ◽  
Francisco Guillén
Keyword(s):  
Hydroxyl Radical ◽  
Fenton Reaction ◽  
White Rot Fungi ◽  
Ligninolytic Enzymes ◽  
White Rot ◽  
Oh Radicals ◽  
Production Rates ◽  
Pycnoporus Cinnabarinus ◽  
Simple Strategy ◽  
The One

ABSTRACT A simple strategy for the induction of extracellular hydroxyl radical (OH) production by white-rot fungi is presented. It involves the incubation of mycelium with quinones and Fe3+-EDTA. Succinctly, it is based on the establishment of a quinone redox cycle catalyzed by cell-bound dehydrogenase activities and the ligninolytic enzymes (laccase and peroxidases). The semiquinone intermediate produced by the ligninolytic enzymes drives OH production by a Fenton reaction (H2O2 + Fe2+ → OH + OH− + Fe3+). H2O2 production, Fe3+ reduction, and OH generation were initially demonstrated with two Pleurotus eryngii mycelia (one producing laccase and versatile peroxidase and the other producing just laccase) and four quinones, 1,4-benzoquinone (BQ), 2-methoxy-1,4-benzoquinone (MBQ), 2,6-dimethoxy-1,4-benzoquinone (DBQ), and 2-methyl-1,4-naphthoquinone (menadione [MD]). In all cases, OH radicals were linearly produced, with the highest rate obtained with MD, followed by DBQ, MBQ, and BQ. These rates correlated with both H2O2 levels and Fe3+ reduction rates observed with the four quinones. Between the two P. eryngii mycelia used, the best results were obtained with the one producing only laccase, showing higher OH production rates with added purified enzyme. The strategy was then validated in Bjerkandera adusta, Phanerochaete chrysosporium, Phlebia radiata, Pycnoporus cinnabarinus, and Trametes versicolor, also showing good correlation between OH production rates and the kinds and levels of the ligninolytic enzymes expressed by these fungi. We propose this strategy as a useful tool to study the effects of OH radicals on lignin and organopollutant degradation, as well as to improve the bioremediation potential of white-rot fungi.

Sign in / Sign up

Export Citation Format

Share Document