Effect of ozonation on sludge reduction in a SBR plant

2007 ◽  
Vol 56 (9) ◽  
pp. 157-165 ◽  
Author(s):  
A. Chiavola ◽  
M. Naso ◽  
E. Rolle ◽  
D. Trombetta
Keyword(s):  
Activated Sludge ◽  
Suspended Solids ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Effluent Quality ◽  
Relevant Effect ◽  
Working Volume ◽  
Biological Nitrogen ◽  
Ozonation Process

This paper provides new insights on the application of the ozonation process for the reduction of activated sludge production in a Sequencing Batch Reactor. The study was performed on two identical lab-scale SBRs plant, fed with domestic sewage: a fraction (1/3 of the working volume) of the activated sludge from one reactor (Exp SBR) was periodically subjected to ozonation for 30 minutes at 0.05 g O3/gSS and then recirculated before the beginning of the cycle; the other reactor was used as control and therefore managed at the same sludge retention time but without the application of ozonation. The effects of the recirculation of the ozonated sludge to the Exp SBR were evaluated in terms of biological nitrogen and carbon removal efficiencies, Mixed Liquor Volatile and Suspended Solids (MLSS and MLVSS, respectively) concentrations, effluent quality and sludge settleability. Besides, characterization of the ozonated sludge was carried out for different oxidant dosages (0.05, 0.07 and 0.37 g O3/gSS) and durations of the ozonation process (10, 20 and 30 minutes). The results show that at 0.05 g O3/gSS and 30 minutes contact time MLVSS as well as MLVSS/MLSS ratio do not change appreciably. Ozone dosage must be increased much further to obtain a relevant effect.

Enrichment and characterization of an anaerobic methyl ethyl ketoxime degrading culture from an anoxic/anaerobic/aerobic activated sludge sequencing batch reactor

1998 ◽  
Vol 37 (4-5) ◽  
pp. 95-98 ◽  
Author(s):  
Nancy G. Love ◽  
Mary E. Rust ◽  
Kathy C. Terlesky
Keyword(s):  
Energy Source ◽  
Activated Sludge ◽  
Electron Acceptor ◽  
Sequencing Batch Reactor ◽  
Enrichment Culture ◽  
Batch Reactor ◽  
Nitrification Inhibitor ◽  
Time Frame ◽  
Methyl Ethyl

An anaerobic enrichment culture was developed from an anoxic/anaerobic/aerobic activated sludge sequencing batch reactor using methyl ethyl ketoxime (MEKO), a potent nitrification inhibitor, as the sole carbon and energy source in the absence of molecular oxygen and nitrate. The enrichment culture was gradually fed decreasing amounts of biogenic organic compounds and increasing concentrations of MEKO over 23 days until the cultures metabolized the oxime as the sole carbon source; the cultures were maintained for an additional 41 days on MEKO alone. Turbidity stabilized at approximately 100 mg/l total suspended solids. Growth on selective media plates confirmed that the microorganisms were utilizing the MEKO as the sole carbon and energy source. The time frame required for growth indicated that the kinetics for MEKO degradation are slow. A batch test indicated that dissolved organic carbon decreased at a rate comparable to MEKO consumption, while sulfate was not consumed. The nature of the electron acceptor in anaerobic MEKO metabolism is unclear, but it is hypothesized that the MEKO is hydrolyzed intracellularly to form methyl ethyl ketone and hydroxylamine which serve as electron donor and electron acceptor, respectively.

Application of excess activated sludge ozonation in an SBR Plant. Effects on substrate fractioning and solids production

2008 ◽  
Vol 58 (1) ◽  
pp. 239-245 ◽  
Author(s):  
M. Naso ◽  
A. Chiavola ◽  
E. Rolle
Keyword(s):  
Activated Sludge ◽  
Organic Nitrogen ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Batch Tests ◽  
Plant Effects ◽  
Removal Processes ◽  
Biological Nitrogen ◽  
Ozonation Process

This paper provides new insights on the application of the ozonation process for the reduction of the activated sludge production in a sequencing batch reactor (SBR). The study was performed in two identical lab-scale SBRs plant, one for experimental activities (Exp SBR) and one used as control (Control SBR), both fed with domestic sewage. A fraction of the activated sludge collected from the Exp SBR at the end of the aerobic react phase was periodically subjected to ozonation for 30 minutes at three different specific dosages (0.05, 0.07 and 0.37 g O3/gSS) and then recirculated before the beginning of the following cycle. Recirculation of the ozonated sludge to the Exp SBR did not appreciably affect the efficiency of the biological nitrogen and carbon removal processes. Nonetheless, an improvement of the denitrification kinetic was observed. Mixed liquor volatile and suspended solids (MLSS and MLVSS, respectively) concentrations in the reactor decreased significantly with time for long term application of the ozonation treatment. Kinetic batch tests on unstressed sludge taken from Control SBR indicated that the different oxidant dosages (0.05, 0.07 and 0.37 g O3/gSS) and durations of the ozonation process (10, 20 and 30 minutes) used remarkably affected chemical oxygen demand (COD) and organic nitrogen fractioning. In particular, soluble and biodegradable fractions seemed to be higher at lower dosage and longer contact time.

Assessment of nitrogen and phosphorus removal in an intermittently aerated sequencing batch reactor (IASBR) and a sequencing batch reactor (SBR)

2013 ◽  
Vol 68 (2) ◽  
pp. 400-405 ◽  
Author(s):  
Min Pan ◽  
Tianhu Chen ◽  
Zhenhu Hu ◽  
Xinmin Zhan
Keyword(s):  
Phosphorus Removal ◽  
Suspended Solids ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Ammonium Nitrogen ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
P Release ◽  
Removal Efficiencies ◽  
Biological Nitrogen

Biological nitrogen and phosphorus removal was investigated in an intermittently aerated sequencing batch reactor (IASBR) and a sequencing batch reactor (SBR). The removal efficiencies of ammonium-nitrogen (NH4+-N) were 100% in both reactors in steady operation state. The total nitrogen (TN) removal efficiencies were 90.4% in the IASBR and 79.3% in the SBR, while the total phosphorus (TP) removal efficiencies were 88.8% in the IASBR and 82.3% in the SBR. The efficiencies of simultaneous nitrification and denitrification (SND) were 90.4% in the IASBR and 79.3% in the SBR, indicating that the IASBR was more efficient than the SBR in SND. The sludge in the IASBR had a P release capability of 16.6 mg P/g VSS (volatile suspended solids) but only 7.5 mg P/g VSS in the SBR.

Excess nitrogen accumulation in activated sludge in sequencing batch reactor with a single-stage oxic process

2009 ◽  
Vol 59 (3) ◽  
pp. 573-582 ◽  
Author(s):  
Xiao-ming Li ◽  
Dong-bo Wang ◽  
Qi Yang ◽  
Wei Zheng ◽  
Jian-bin Cao ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Ph Value ◽  
Batch Reactor ◽  
Nitrogen Loss ◽  
Single Stage ◽  
Synthetic Wastewater ◽  
Nitrogen Accumulation ◽  
Excess Nitrogen

It was occasionally found that a significant nitrogen loss in solution under neutral pH value in a sequencing batch reactor with a single-stage oxic process using synthetic wastewater, and then further studies were to verify the phenomenon of nitrogen loss and to investigate the pathway of nitrogen removal. The result showed that good performance of nitrogen removal was obtained in system. 0–7.28 mg L−1 ammonia, 0.08–0.38 mg L−1 nitrite and 0.94–2.12 mg L−1 nitrate were determined in effluent, respectively, when 29.85–35.65 mg L−1 ammonia was feeding as the sole nitrogen source in influent. Furthermore, a substantial nitrogen loss in solution (95% of nitrogen influent) coupled with a little gaseous nitrogen increase in off-gas (7% of nitrogen influent) was determined during a typical aerobic phase. In addition, about 322 mg nitrogen accumulation (84% of nitrogen influent) was detected in activated sludge. Based on nitrogen mass balance calculation, the unaccounted nitrogen fraction and the ratio of nitrogen accumulation in sludge/nitrogen loss in solution were 14.6 mg (3.7% of nitrogen influent) and 0.89, respectively. The facts indicated that the essential pathway of nitrogen loss in solution in this study was excess nitrogen accumulation in activated sludge.

Advanced Treatment of Domestic Wastewater Using Sequencing Batch Reactor Activated Sludge Process

1993 ◽  
Vol 28 (10) ◽  
pp. 267-274 ◽  
Author(s):  
M. Imura ◽  
E. Suzuki ◽  
T. Kitao ◽  
S. Iwai
Keyword(s):  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Domestic Wastewater ◽  
Experimental Period ◽  
Small Scale ◽  
Experimental Plant ◽  
Activated Sludge Process ◽  
Nitrogen And Phosphorus ◽  
Experimental Apparatus

In order to apply a sequencing batch reactor activated sludge process to small scale treatment facilities, various experiments were conducted by manufacturing an experimental apparatus made of a factory-produced FRP cylinder transverse tank (Ø 2,500mm). Results of the verification test conducted for one year by leading the wastewater discharged from apartment houses into the experimental apparatus were as follows. Excellent performance was achieved without any addition of carbon source, irrespective of the organic compound concentration and the temperature of raw wastewater. Organic substances, nitrogen and phosphorus were removed simultaneously. Due to the automated operation format, stable performance was obtained with only periodic maintenance. Though water depth of the experimental plant was shallow, effective sedimentation of activated sludge was continued during the experimental period. Regarding the aerobic and anaerobic process, nitrification and denitrification occurred smoothly.

Sign in / Sign up

Export Citation Format

Share Document