scholarly journals Trivalent iron-tartaric acid metal-organic framework for catalytic ozonation of succinonitrile

2020 ◽  
Author(s):  
Song Wang ◽  
Genwang Zhu ◽  
Zhongchen Yu ◽  
Chenxi Li ◽  
Dan Wang ◽  
...  
Keyword(s):  
Tartaric Acid ◽  
Removal Rate ◽  
Metal Organic Framework ◽  
Catalytic Performance ◽  
Catalytic Ozonation ◽  
Cod Removal ◽  
Trivalent Iron ◽  
X Ray ◽  
Metal Organic ◽  
Cod Removal Rate

Abstract As porous crystal materials, metal-organic frameworks (MOFs) have attracted wide attention in the field of environmental remediation. In this study, a trivalent iron-tartaric acid metal-organic framework (T2-MOF) was successfully synthesized using the inexpensive raw materials ferric chloride (FeCl3.6H2O) and tartaric acid (C4H6O6). The physical and chemical properties of T2-MOF were studied by using X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and Brunauer–Emmett–Teller. After that, T2-MOF was used as a catalyst for catalytic ozonation of succinonitrile. The results show that T2-MOF has obvious crystal characteristics and uniform structure. In addition, T2-MOF exhibits strong catalytic performance in ozonation of succinonitrile. The results indicate that the chemical oxygen demand (COD) removal rate is affected by various operating parameters including catalyst characteristics dosages and initial pH values. In the ozonation with 30 mg L−1 T2-MOF, the COD removal rate of 100 mg L−1 succinonitrile reached 73.1% (±4.6%) within 180 min, which was 67.3% (±4.4%) higher than that obtained in the process without catalyst. T2-MOF maintained strong catalytic performance with the pH range of 3.0–7.0. By monitoring the Fe2+ concentration at different reaction time, it was found that the homogeneous catalysis occurred simultaneously with the heterogeneous catalysis.

scholarly journals Catalytic Ozonation for Effective Degradation of Coal Chemical Biochemical Tail Water by Mn/Ce@RM Catalyst

Water ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 206
Author(s):  
Yicheng Wang ◽  
Yingkun Wang ◽  
Xi Lu ◽  
Wenquan Sun ◽  
Yanhua Xu ◽  
...  
Keyword(s):  
Reaction Time ◽  
Removal Rate ◽  
Catalytic Ozonation ◽  
Operating Conditions ◽  
Cod Removal ◽  
X Ray ◽  
Initial Ph ◽  
Catalyst Dosage ◽  
Cod Removal Rate ◽  
Tail Water

An Mn/Ce@red mud (RM) catalyst was prepared from RM via a doping–calcination method. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were used to characterize the surface morphology, crystal morphology, and elemental composition of the Mn/Ce@RM catalyst, respectively. In addition, preparation and catalytic ozonation conditions were optimized, and the mechanism of catalytic ozonation was discussed. Lastly, a fuzzy analytic hierarchy process (FAHP) was adopted to evaluate the degradation of coal chemical biochemical tail water. The best preparation conditions for the Mn/Ce@RM catalyst were found to be as follows: (1) active component loading of 3%, (2) Mn/Ce doping ratio of 2:1, (3) calcination temperature of 550 °C, (4) calcination time of 240 min, and (5) fly ash floating bead doping of 10%. The chemical oxygen demand (COD) removal rate was 76.58% under this preparation condition. The characterization results suggested that the pore structure of the optimized Mn/Ce@RM catalyst was significantly improved. Mn and Ce were successfully loaded on the catalyst in the form of MnO2 and CeO2. The best operating conditions in the study were as follows: (1) reaction time of 80 min, (2) initial pH of 9, (3) ozone dosage of 2.0 g/h, (4) catalyst dosage of 62.5 g/L, and (5) COD removal rate of 84.96%. Mechanism analysis results showed that hydroxyl radicals (•OH) played a leading role in degrading organics in the biochemical tail water, and adsorption of RM and direct oxidation of ozone played a secondary role. FAHP was established on the basis of environmental impact, economic benefit, and energy consumption. Comprehensive evaluation by FAHP demonstrated that D3 (with an ozone dosage of 2.0 g/H, a catalyst dosage of 62.5 g/L, initial pH of 9, reaction time of 80 min, and a COD removal rate of 84.96%) was the best operating condition.

scholarly journals Mechanochemical Synthesis of Nickel-Modified Metal–Organic Frameworks for Reduction Reactions

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 526
Author(s):  
Paulette Gómez-López ◽  
Martyna Murat ◽  
José M. Hidalgo-Herrador ◽  
Carolina Carrillo-Carrión ◽  
Alina M. Balu ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
Catalytic Performance ◽  
Hydrogenation Reaction ◽  
Nickel Oxide Nanoparticles ◽  
The Sustainable Development ◽  
X Ray ◽  
Metal Organic ◽  
Complementary Techniques ◽  
Ni Species

In this work, we report the incorporation of nickel oxide nanoparticles into a metal–organic framework (MOF) structure by a solvent-free mechanochemical strategy. In particular, the zirconium-based MOF UiO-66 was modified with different Ni loadings and characterized using complementary techniques including X-ray diffraction (XRD), N2 porosimetry and X-ray photoelectron spectroscopy (XPS). The catalytic potential of the as-prepared Ni/UiO-66 materials in the hydrogenation reaction of methyl levulinate using 2-propanol as hydrogen donor solvent has been investigated under flow conditions. Under optimized conditions, the 5%Ni/UiO-66 led to the best catalytic performance (70% yield, 100% selectivity to gamma-valerolactone), which could be attributed to the higher content of the Ni species within the MOF structure. The obtained results are promising and contribute to highlighting the great potential of MOFs in biomass upgrading processes, opening the path to the sustainable development of the chemical industry.

Study on Catalyst for Catalytic Ozonation to Leachate and Catalytic Process

2014 ◽  
Vol 989-994 ◽  
pp. 783-788
Author(s):  
Bao Jun Jiang ◽  
Zhu Jun Tian ◽  
Jin Ming Jiang
Keyword(s):  
Nickel Catalyst ◽  
Absorption Rate ◽  
Loading Rate ◽  
Removal Rate ◽  
Copper Catalyst ◽  
Catalytic Ozonation ◽  
Cod Removal ◽  
Ozone Absorption ◽  
N Removal ◽  
Cod Removal Rate

Five kinds of catalyst were prepared with Chromium, cadmium, cobalt, copper, nickel loading on the γ–Al2O3. Catalyst loading rate, effects to the ozone suction rates and water quality change situation of catalytic ozonation to leachate were studied. It can be found that when the mO3/mCOD equaled 0.11, 0.15 and 0.26 separately, and mCatalyst/mCOD fixed at 5, the cobalt has the highest loading rate, the cadmium catalyst could improve the ozone absorption rate, the chromium catalyst makes against the ozone absorption rate, the copper catalyst can increase the COD removal rate and the nickel catalyst has advantages for the NH3–N removal rate. Results indicate that: the leachate COD removal rate increased by 20.2 percent by the copper catalyst adding and the NH3–N removal rate rise 20.7 percent with the nickel catalyst; the best dosage of the ozone in catalytic ozonation is mO3/mCOD at 0.12 to 0.13; the degree of oxidation is exited.

Synthesis and Structure of a Clathrated Two-Dimensional Metal-Organic Framework: [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2·H2O (L = Bis(1-pyrazinylethylidene)hydrazine)

2008 ◽  
Vol 73 (1) ◽  
pp. 24-31
Author(s):  
Dayu Wu ◽  
Genhua Wu ◽  
Wei Huang ◽  
Zhuqing Wang
Keyword(s):  
Metal Organic Framework ◽  
Channel Structure ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Guest Molecules ◽  
X Ray ◽  
Square Planar ◽  
Metal Organic ◽  
Aqueous Meoh ◽  
Organic Framework

The compound [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2 was obtained by the reaction of Cd(ClO4)2, bis(1-pyrazinylethylidene)hydrazine (L) and 4,4'-bipyridine in aqueous MeOH. Single-crystal X-ray diffraction has revealed its two-dimensional metal-organic framework. The 2-D layers superpose on each other, giving a channel structure. The square planar grids consist of two pairs of shared edges with Cd(II) ion and a 4,4'-bipyridine molecule each vertex and side, respectively. The square cavity has a dimension of 11.817 × 11.781 Å. Two guest molecules of bis(1-pyrazinylethylidene)hydrazine are clathrated in every hydrophobic host cavity, being further stabilized by π-π stacking and hydrogen bonding. The results suggest that the hydrazine molecules present in the network serve as structure-directing templates in the formation of crystal structures.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

scholarly journals Backbonding contributions to small molecule chemisorption in a metal–organic framework with open copper(i) centers

2021 ◽  
Author(s):  
Gregory M. Su ◽  
Han Wang ◽  
Brandon R. Barnett ◽  
Jeffrey R. Long ◽  
David Prendergast ◽  
...  
Keyword(s):  
Fine Structure ◽  
Small Molecule ◽  
Metal Organic Framework ◽  
X Ray ◽  
Metal Site ◽  
Absorption Fine ◽  
Metal Organic ◽  
X Ray Absorption ◽  
Organic Framework

In situ near edge X-ray absorption fine structure spectroscopy directly probes unoccupied states associated with backbonding interactions between the open metal site in a metal–organic framework and various small molecule guests.

scholarly journals Ti/RuO2-IrO2-SnO2 Anode for Electrochemical Degradation of Pollutants in Pharmaceutical Wastewater: Optimization and Degradation Performances

2020 ◽  
Vol 13 (1) ◽  
pp. 126
Author(s):  
Guozhen Zhang ◽  
Xingxing Huang ◽  
Jinye Ma ◽  
Fuping Wu ◽  
Tianhong Zhou
Keyword(s):  
Removal Rate ◽  
Inorganic Compounds ◽  
Oxide Coating ◽  
X Ray Diffraction ◽  
Pharmaceutical Wastewater ◽  
High Concentration ◽  
Dimensionally Stable Anodes ◽  
X Ray ◽  
Initial Ph ◽  
Cod Removal Rate

Electrochemical oxidation technology is an effective technique to treat high-concentration wastewater, which can directly oxidize refractory pollutants into simple inorganic compounds such as H2O and CO2. In this work, two-dimensionally stable anodes, Ti/RuO2-IrO2-SnO2, have been developed in order to degrade organic pollutants from pharmaceutical wastewater. Characterization by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) showed that the oxide coating was successfully fabricated on the Ti plate surface. Electrocatalytic oxidation conditions of high concentration pharmaceutical wastewater was discussed and optimized, and the best results showed that the COD removal rate was 95.92% with the energy consumption was 58.09 kW·h/kgCOD under the electrode distance of 3 cm, current density of 8 mA/cm2, initial pH of 2, and air flow of 18 L/min.

A MOF based on a lead(II) 2-oxido-6-methylpyridine-4-carboxylate network

2020 ◽  
Vol 75 (4) ◽  
pp. 365-369
Author(s):  
Long Tang ◽  
Yu Pei Fu ◽  
Na Cui ◽  
Ji Jiang Wang ◽  
Xiang Yang Hou ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Carboxylic Acid ◽  
Thermogravimetric Analysis ◽  
Metal Organic Framework ◽  
X Ray Diffraction ◽  
X Ray ◽  
Connected Node ◽  
Metal Organic ◽  
Solid State Fluorescence

AbstractA new metal-organic framework, [Pb(hmpcaH)2]n (1), has been hydrothermally synthesized from Pb(OAc)2 · 3H2O and 2-hydroxy-6-methylpyridine-4-carboxylic acid (hmpcaH2; 2), and characterized by IR spectroscopy, elemental and thermogravimetric analysis, and single-crystal X-ray diffraction. In complex 1, each hmpcaH− ligand represents a three-connected node to combine with the hexacoordinated Pb(II) ions, generating a 3D binodal (3,6)-connected ant network. The crystal structure of 2 was determined. The solid-state fluorescence properties of 1 and 2 were investigated.

Sign in / Sign up

Export Citation Format

Share Document