Recent Progress in Saikosaponin Biosynthesis in Bupleurum

2020 ◽  
Vol 21 ◽  
Author(s):  
Chun Sui ◽  
Wen-Jing Han ◽  
Chu-Ran Zhu ◽  
Jian-He Wei
Keyword(s):  
Chinese Medicine ◽  
Recent Progress ◽  
Molecular Level ◽  
The Other ◽  
Online Resources ◽  
Active Components ◽  
Considerable Effort ◽  
P450 Gene ◽  
Radix Bupleuri ◽  
The Stability

Background: Chaihu is a popular traditional Chinese medicine that has been used for centuries. It is traditionally used to treat cold fever and liver-related diseases. Saikosaponins (SSs) are one of the main active components of chaihu, in addition to essential oils, flavonoids, and polysaccharides. Considerable effort is needed to reveal the biosynthesis and regulation of SSs on the basis of current progress. Objective: The aim of this study is to provide a reference for further studies and arouse attention by summarizing the recent achievements on SS biosynthesis. Method: All the data compiled and presented here were obtained from various online resources, such as PubMed Scopus and Baidu Scholar in Chinese, up to October 2019. Results: A few genes of the enzymes of SSs participating in the biosynthesis of SSs were isolated. Among these genes, only the P450 gene was verified to catalyze the SS skeleton β-amyrin synthase. Several UDP-glycosyltransferase genes were predicted to be involved in the biosynthesis of SSs. SSs could be largely biosynthesized in the phloem and then transported from the protoplasm, which is the biosynthetic site, to the vacuoles to avoid self-poisoning. As for the other secondary metabolites, the biosynthesis of SSs was strongly affected by environmental factors and the different species belonging to the genus of Bupleurum. Transcriptional regulation was studied at the molecular level. Conclusion: Profound discoveries in SSs may elucidate the mechanism of diverse the monomer formation of SSs and provide reference for maintaining the stability of SS content in Radix Bupleuri.

Uniformity of Magnification from Different Electron Microscopes

1967 ◽  
Vol 25 ◽  
pp. 32-33
Author(s):  
Godfrey C. Hoskins ◽  
V. Williams ◽  
V. Allison
Keyword(s):  
Diffraction Grating ◽  
The Other ◽  
Carbon Replica ◽  
Electron Microscopes ◽  
The Stability

The method demonstrated is an adaptation of a proven procedure for accurately determining the magnification of light photomicrographs. Because of the stability of modern electrical lenses, the method is shown to be directly applicable for providing precise reproducibility of magnification in various models of electron microscopes.A readily recognizable area of a carbon replica of a crossed-line diffraction grating is used as a standard. The same area of the standard was photographed in Phillips EM 200, Hitachi HU-11B2, and RCA EMU 3F electron microscopes at taps representative of the range of magnification of each. Negatives from one microscope were selected as guides and printed at convenient magnifications; then negatives from each of the other microscopes were projected to register with these prints. By deferring measurement to the print rather than comparing negatives, correspondence of magnification of the specimen in the three microscopes could be brought to within 2%.

The Nature of Oxide Surfaces: Topographic and Electronic Structure

1993 ◽  
Vol 51 ◽  
pp. 966-967
Author(s):  
Dawn A. Bonnell ◽  
Yong Liang
Keyword(s):  
Transition Metal Oxides ◽  
Electronic Structures ◽  
Recent Progress ◽  
Spatial Localization ◽  
Level Of Detail ◽  
Scanning Tunneling ◽  
Oxide Surfaces ◽  
Tunneling Microscopy ◽  
Considerable Effort ◽  
Complete Understanding

Recent progress in the application of scanning tunneling microscopy (STM) and tunneling spectroscopy (STS) to oxide surfaces has allowed issues of image formation mechanism and spatial resolution limitations to be addressed. As the STM analyses of oxide surfaces continues, it is becoming clear that the geometric and electronic structures of these surfaces are intrinsically complex. Since STM requires conductivity, the oxides in question are transition metal oxides that accommodate aliovalent dopants or nonstoichiometry to produce mobile carriers. To date, considerable effort has been directed toward probing the structures and reactivities of ZnO polar and nonpolar surfaces, TiO2 (110) and (001) surfaces and the SrTiO3 (001) surface, with a view towards integrating these results with the vast amount of previous surface analysis (LEED and photoemission) to build a more complete understanding of these surfaces. However, the spatial localization of the STM/STS provides a level of detail that leads to conclusions somewhat different from those made earlier.

scholarly journals Black Hole Algorithm for Sustainable Design of Counterfort Retaining Walls

2020 ◽  
Vol 12 (7) ◽  
pp. 2767 ◽  
Author(s):  
Víctor Yepes ◽  
José V. Martí ◽  
José García
Keyword(s):  
Black Hole ◽  
Sustainable Design ◽  
Retaining Walls ◽  
The Other ◽  
Trade Off ◽  
Construction Company ◽  
Geometric Variables ◽  
The Stability ◽  
The Cost ◽  
Black Hole Algorithm

The optimization of the cost and CO 2 emissions in earth-retaining walls is of relevance, since these structures are often used in civil engineering. The optimization of costs is essential for the competitiveness of the construction company, and the optimization of emissions is relevant in the environmental impact of construction. To address the optimization, black hole metaheuristics were used, along with a discretization mechanism based on min–max normalization. The stability of the algorithm was evaluated with respect to the solutions obtained; the steel and concrete values obtained in both optimizations were analyzed. Additionally, the geometric variables of the structure were compared. Finally, the results obtained were compared with another algorithm that solved the problem. The results show that there is a trade-off between the use of steel and concrete. The solutions that minimize CO 2 emissions prefer the use of concrete instead of those that optimize the cost. On the other hand, when comparing the geometric variables, it is seen that most remain similar in both optimizations except for the distance between buttresses. When comparing with another algorithm, the results show a good performance in optimization using the black hole algorithm.

scholarly journals Mixing Oil-Based Microencapsulation of Garlic Essential Oil: Impact of Incorporating Three Commercial Vegetable Oils on the Stability of Emulsions

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1637
Author(s):  
Yunjiao Zhao ◽  
Rui Liu ◽  
Cuiping Qi ◽  
Wen Li ◽  
Mohamed Rifky ◽  
...  
Keyword(s):  
Essential Oil ◽  
Vegetable Oils ◽  
Encapsulation Efficiency ◽  
Ostwald Ripening ◽  
Corn Oil ◽  
Whey Protein Concentrate ◽  
Diallyl Disulfide ◽  
Active Components ◽  
The Stability ◽  
Garlic Essential Oil

The active components in garlic essential oil are easily degradable, which limits its application in the food industry. Vegetable oils (VOs) were used to improve the stability of garlic essential oil (GEO) emulsion. The volatile compounds of GEO and its mixtures with vegetable oils (VOs), including corn oil (CO), soybean oil (SO), and olive oil (OO) indicated that GEO-VO mixtures had a higher percentage of Diallyl disulfide and Diallyl trisulfide than pure GEO. Adding an appropriate amount of VOs promoted the GEO emulsion (whey protein concentrate and inulin as the wall materials) stability in order of CO > SO > OO. Evaluation of the encapsulation efficiency, controlled release, and antimicrobial activity of GEO-VO microcapsules showed that the GEO was successfully entrapped and slowly released with active antibacterial activities on both E. coli and S. aureus. Collectively, these results implied that VOs, especially for 20% CO, improved the stability of GEO emulsions and the encapsulation efficiency of GEO microcapsules. The mechanism might be related to (1) the regulating effect of density difference between oil and water phases on prevention to gravitational separation, (2) the promotion to the compatibility of GEO and VOs to inhibit the phase separation caused by Ostwald ripening.

scholarly journals Insufficient Stability of Clavulanic Acid in Widely Used Child-Appropriate Formulations

Antibiotics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 225
Author(s):  
Ines Mack ◽  
Mike Sharland ◽  
Janneke M. Brussee ◽  
Sophia Rehm ◽  
Katharina Rentsch ◽  
...  
Keyword(s):  
Ambient Temperature ◽  
Clavulanic Acid ◽  
Storage Conditions ◽  
Essential Medicines ◽  
Active Components ◽  
Middle Income ◽  
Ambient Temperatures ◽  
Essential Medicines List ◽  
Dispersible Tablets ◽  
The Stability

Amoxicillin-clavulanic acid (AMC) belongs to the WHO Essential Medicines List for children, but for optimal antimicrobial effectiveness, reconstituted dry powder suspensions need to be stored in a refrigerated environment. Many patients in low- and middle-income countries who are sold AMC suspensions would be expected not to keep to the specified storage conditions. We aimed to assess the stability of both ingredients in liquid formulations and dispersible tablets, combined with nationally representative data on access to appropriate storage. Degradation of amoxicillin (AMX) and clavulanic-acid (CLA) was measured in suspensions and dispersible tablets commercially available in Switzerland at different ambient temperatures (8 °C vs. 28 °C over 7 days, and 23 °C vs. 28 °C over 24 h, respectively). Data on access to refrigeration and electricity were assessed from the USAID-funded Demographic and Health Survey program. In suspensions, CLA degraded to a maximum of 12.9% (95% CI −55.7%, +29.9%) at 8°C and 72.3% (95% CI −82.8%, −61.8%) at a 28 °C ambient temperature during an observation period of 7 days. Dispersible tablets were observed during 24 h and CLA degraded to 15.4% (95% CI −51.9%, +21.2%) at 23 °C and 21.7% (−28.2%, −15.1%) at a 28 °C ambient temperature. There is relevant degradation of CLA in suspensions during a 7-day course. To overcome the stability challenges for all active components, durable child-appropriate formulations are needed. Until then, prescribers of AMC suspensions or pharmacists who sell the drug need to create awareness for the importance of proper storage conditions regarding effectiveness of both antibiotics and this recommendation should be reflected in the WHO Essential Medicines List for children.

scholarly journals A Fractional SAIDR Model in the Frame of Atangana–Baleanu Derivative

2021 ◽  
Vol 5 (2) ◽  
pp. 32
Author(s):  
Esmehan Uçar ◽  
Sümeyra Uçar ◽  
Fırat Evirgen ◽  
Necati Özdemir
Keyword(s):  
Existence And Uniqueness ◽  
Laplace Transformation ◽  
Cell Phones ◽  
Mobile Network ◽  
The Other ◽  
Banach Fixed Point Theorem ◽  
Propagation Models ◽  
Computer Worms ◽  
Computer Viruses ◽  
The Stability

It is possible to produce mobile phone worms, which are computer viruses with the ability to command the running of cell phones by taking advantage of their flaws, to be transmitted from one device to the other with increasing numbers. In our day, one of the services to gain currency for circulating these malignant worms is SMS. The distinctions of computers from mobile devices render the existing propagation models of computer worms unable to start operating instantaneously in the mobile network, and this is particularly valid for the SMS framework. The susceptible–affected–infectious–suspended–recovered model with a classical derivative (abbreviated as SAIDR) was coined by Xiao et al., (2017) in order to correctly estimate the spread of worms by means of SMS. This study is the first to implement an Atangana–Baleanu (AB) derivative in association with the fractional SAIDR model, depending upon the SAIDR model. The existence and uniqueness of the drinking model solutions together with the stability analysis are shown through the Banach fixed point theorem. The special solution of the model is investigated using the Laplace transformation and then we present a set of numeric graphics by varying the fractional-order θ with the intention of showing the effectiveness of the fractional derivative.

scholarly journals Competing Conventions with Costly Information Acquisition

Games ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 53
Author(s):  
Roberto Rozzi
Keyword(s):  
Information Acquisition ◽  
Evolutionary Model ◽  
Equilibrium Selection ◽  
The Other ◽  
Group Interactions ◽  
Social Coordination ◽  
Long Run ◽  
Stochastic Stability Analysis ◽  
The Stability ◽  
The Cost

We consider an evolutionary model of social coordination in a 2 × 2 game where two groups of players prefer to coordinate on different actions. Players can pay a cost to learn their opponent’s group: if they pay it, they can condition their actions concerning the groups. We assess the stability of outcomes in the long run using stochastic stability analysis. We find that three elements matter for the equilibrium selection: the group size, the strength of preferences, and the information’s cost. If the cost is too high, players never learn the group of their opponents in the long run. If one group is stronger in preferences for its favorite action than the other, or its size is sufficiently large compared to the other group, every player plays that group’s favorite action. If both groups are strong enough in preferences, or if none of the groups’ sizes is large enough, players play their favorite actions and miscoordinate in inter-group interactions. Lower levels of the cost favor coordination. Indeed, when the cost is low, in inside-group interactions, players always coordinate on their favorite action, while in inter-group interactions, they coordinate on the favorite action of the group that is stronger in preferences or large enough.

scholarly journals Treatment of Rheumatoid Arthritis with Traditional Chinese Medicine

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Wen-Yuan Lee ◽  
Hsin-Yi Chen ◽  
Kuan-Chung Chen ◽  
Calvin Yu-Chian Chen
Keyword(s):  
Rheumatoid Arthritis ◽  
Chinese Medicine ◽  
Traditional Chinese Medicine ◽  
Protein Complex ◽  
Chronic Inflammatory Disease ◽  
Dynamics Simulation ◽  
Current Therapy ◽  
Potential Candidate ◽  
Interleukin 6 Receptor ◽  
The Stability

Rheumatoid arthritis (RA) is a chronic inflammatory disease that will affect quality of life and, working efficiency, and produce negative thoughts for patients. Current therapy of RA is treated with disease-modifying antirheumatic drugs (DMARDs). Although most of these treatment methods are effective, most patients still have a pleasant experience either due to poor efficacy or side effects or both. Interleukin-6 receptor (IL6R) is important in the pathogenesis of RA. In this study, we would like to detect the potential candidates which inhibit IL6R against RA from traditional Chinese medicine (TCM). We use TCM compounds from the TCM Database@Taiwan for virtually screening the potential IL6R inhibitors. The TCM candidate compound, calycosin, has potent binding affinity with IL6R protein. The molecular dynamics simulation was employed to validate the stability of interaction in the protein complex with calycosin. The analysis indicates that protein complex with calycosin is more stable. In addition, calycosin is known to be one of the components ofAngelica sinensis, which has been indicated to have an important role in the treatment of rheumatoid arthritis. Therefore, calycosin is a potential candidate as lead compounds for further study in drug development process with IL6R protein against rheumatoid arthritis.

A Biomechanical Evaluation of Three Forms of Internal Fixation Used in Ankle Arthrodesis

1994 ◽  
Vol 15 (6) ◽  
pp. 297-300 ◽  
Author(s):  
Michael P. Dohm ◽  
James B. Benjamin ◽  
Jeffrey Harrison ◽  
John A. Szivek
Keyword(s):  
Internal Fixation ◽  
Plate Fixation ◽  
Ankle Arthrodesis ◽  
Biomechanical Study ◽  
The Other ◽  
Fixation Failure ◽  
Plate Group ◽  
Biomechanical Evaluation ◽  
The Stability ◽  
Fibular Strut

A biomechanical study was undertaken to evaluate the relative stability of three types of internal fixation used for ankle arthrodesis. Crossed screw fixation, RAF fibular strut fixation, and T-plate fixation were tested in 30 cadaver ankles using an MTS machine. T-plate fixation consistantly provided the stiffest construct when compared with the other types of fixation. Failure occurred by distraction of bony surfaces, posterior to the plane of fixation, in the crossed screw and RAF groups. In contrast, failure in the T-plate group occurred through compression of bone anterior to the midcoronal plane of the tibia. Although the stability of fixation is only one factor in determining the success or failure of ankle arthrodesis, the results of this study would support T-plate fixation over the other forms tested.

Sign in / Sign up

Export Citation Format

Share Document