Preliminary studies on optimization of anti-parkinson drug loaded lipid nanoparticles enriched hydrogel formulations for management of Parkinson’s disease

2021 ◽  
Vol 11 ◽  
Author(s):  
Kumara Swamy ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Parkinson’S Disease ◽  
Particle Size ◽  
Parkinson's Disease ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Release Studies ◽  
Lipid Nanocarriers ◽  
Vitro Release

Purpose: Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. Aim: The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that could enhance RP therapeutic outcomes during PD treatment. Methods: RP nanoparticles were prepared by homogenization followed by probe sonication and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), % assay, % entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. Results: The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h. Optimized SLN, NLC, and nanocarrier loaded hydrogel formulations were stable over three months at 4ºC and 25ºC storage conditions. Conclusion: Overall, the results demonstrated that lipid nanocarriers and their corresponding hydrogel formulations can be considered as a topical drug delivery vehicle for RP during the treatment of PD.

scholarly journals Preparation, In Vitro characterization and stability studies of ropinirole lipid nanoparticles enriched hydrogel for treatment of neurodegeneration diseases

2021 ◽  
Vol 11 (2-S) ◽  
pp. 66-75
Author(s):  
Kumara Swamy Samanthula ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Solid Lipid ◽  
Release Studies ◽  
Vitro Release

Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that might improve efficacy in PD treatment. RP nanoparticles were prepared by homogenization aided probe sonication method and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), assay, entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h and were stable over three months at 4ºC and 25ºC storage conditions. Keywords: Parkinson’s disease, Ropinirole, Solid lipid nanoparticles, Nanostructured lipid carriers, Hydrogel.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF CURCUMIN LOADED JACKFRUIT SEED STARCH NANOPARTICLES

2020 ◽  
pp. 32-35
Author(s):  
JUNMONI NATH
Keyword(s):  
Particle Size ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Infrared Studies ◽  
Drug Entrapment Efficiency ◽  
Starch Nanoparticles ◽  
Vitro Release

Objectives: To meet the above aim the following objectives are undertaken: (1) Isolation of starch from jackfruit seeds and formulation of curcumin loaded jackfruit seed starch nanoparticles (2) In vitro evaluations of the drug loaded nanoparticles Methods: Jackfruit seed starch nanoparticles were prepared by Nanoprecipitation technique. In this technique, jackfruit seed starch was mixed with curcumin and acetone solution using a magnetic stirrer at 600 rpm. To the above solution, water were added dropwise and stirred at room temperature until acetone was completely vaporized. Nanoparticles were separated by centrifugation at 4000 rpm after 40 min. Results: Particle size of prepared nanoparticle formulations was found to be 371 to 411.72 nm with PDI of 0.148 to 0.356. The maximum % drug entrapment was found to be 57.34 % with formulation F5. In vitro release studies showed sustained release of drug till 12 h. Conclusion: The prepared nanoparticles were evaluated for its particle size, drug entrapment efficiency, in vitro drug release study, and surface morphology studies by scanning electron microscopy. The results of Fourier transform infrared studies of 1:1 physical mixture of drug and excipients confirmed the absence of incompatibility. Thus, the study concludes that curcumin loaded jackfruit seed starch nanoparticles were developed successfully by nanoprecipitation, which is expected to enhance the oral bioavailability of curcumin.

scholarly journals Development and Characterization of Anti-alzheimer Drug-loaded Chitosan Nanoparticles for the Enhanced Penetration of Blood Brain Barrier

2021 ◽  
pp. 33-39
Author(s):  
Maria Abdul Ghafoor Raja ◽  
Muhammad Wahab Amjad ◽  
Nawaf Mohamed Alotaibi
Keyword(s):  
Particle Size ◽  
Acetylcholinesterase Inhibitor ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Bioavailability ◽  
Release Studies ◽  
Drug Entrapment Efficiency ◽  
Vitro Release

Nanotechnology facilitated drug delivery has been used to enhance the drug bioavailability, efficacy, reduce toxicity and improve patient compliance aiming to targetthe cells and tissues to produce anticipated pharmacological action. The aim of the present study was to formulate and evaluate rivastigmine (RT) loaded chitosan (CS) nanoparticles for sustained release. RT is a short actingreversible acetylcholinesterase inhibitor used for the treatment of mild to moderate Alzheimer's and Parkinson's disease. In current research RT loaded CS-tripolyphosphate (TPP) nanoparticles were prepared by usingionic gelation method in fourdifferent polymer concentrations (0.1%,0.2%,0.3%,0.4%). The prepared nanoparticles were evaluated by Zeta sizer in order to determine particle size, PDI and zeta potential. Further, drug entrapment efficiency and in vitro release studies were carried out. The results showed that particle size decreased by loading drug within nanoparticles when compared with unloaded nanoparticles. The particle size of RT loaded CS nanoparticles ranged from 125.9 ± 2.5 to 356.0 ± 7.9 by varying CS concentration from 0.1% to 0.4% w/v. Among different ratios studied, 0.4% ratio showed highest drug entrapment efficiency (80%). In vitro release studies showed that RT loaded CS nanoparticles could sustain release the drug.In conclusion, the current research results showed that the chitosan nanoparticles can be used as a potential carrier for providing sustained delivery of RT.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

LINAGLIPTIN AND GLICLAZIDE DI-LOADED EXTENDED-RELEASE NANOPARTICLES: FORMULATION AND EVALUATION

2021 ◽  
Vol 74 (9) ◽  
pp. 2315-2322
Author(s):  
Firas Aziz Rahi ◽  
Muath Sheet Mohammed Ameen ◽  
Mohammed Shamil Fayyadh
Keyword(s):  
Particle Size ◽  
Xanthan Gum ◽  
Extended Release ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Hplc Method ◽  
Electronic Microscopy ◽  
Vitro Release

The aim: This work aimed to formulate gliclazide and linagliptin extended-release nanoparticles. Materials and methods: A HPLC method was developed and validated to determine gliclazide and linagliptin at the same time without interference. The nanoparticles were prepared by emulsion solvent evaporation using two polymers, namely hydroxypropyl methylcellulose (HPMC) 4000 cps and xanthan gum. Results: Nanoparticles prepared were characterized for drug contents, production yield and entrapment efficiency, zeta potential, particle size, morphology by transmission electronic microscopy (TEM) and in-vitro release rate. The formulae GLH1, GLX1 and GHX1 showed release of linagliptin more than 75% after 8 hrs. While the only formula among the three (GHX1) showed release of gliclazide more than 80% after 8 h. So, the formula GHX1 showed acceptable release of more than 80% of both gliclazide and linagliptin after 8 h. Conclusions: The formula GHX1 which containing (0.5:1 xanthan gum: drugs) was the best nanoparticles formula which released more than 80% of both drugs after 8 h and could achieve good extended release over 24 h.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

Preparation, Characterization and In vivo Evaluation of Rosuvastatin Calcium Loaded Solid Lipid Nanoparticles

2015 ◽  
Vol 8 (1) ◽  
pp. 2779-2785
Author(s):  
Kishan V ◽  
Suvarna G ◽  
Narender D
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Phosphate Buffer ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Release Studies ◽  
First Pass ◽  
Vitro Release ◽  
Rosuvastatin Calcium

Rosuvastatin calcium (RC), is a hypolipidemic drug, and has poor oral bioavailability of about 20% due to first-pass effect. For improving the oral bioavailability of RC, solid lipid nanoparticles (SLNs) were developed using triglycerides (tristearin, tripalmitin, and trimyristin). Hot homogenization followed by ultrasonication method was used to prepare RC-SLNs. The prepared SLNs were characterized for particle size, PDI, zeta potential (ZP), entrapment efficiency (EE) and drug content. In vitro release studies were performed in 0.1N HCl and pH 6.8 phosphate buffer of by open tube method. Physical stability the SLNs was observed at refrigerated temperature and room temperature for 60 days. Pharmacokinetics of RC- SLNs after oral administration, in male Wistar rats was studied. SLNs prepared with tristearin (Dyanasan-118) having size of 207.3 ± 8.52 nm, PDI of 0.344 ± 0.084, ZP of – 20.9 ± 4.88 mV with 97.06 ± 0.210 % EE were optimized. Differential scanning calorimetric (DSC) study revealed that no interaction between drug and lipid. In vitro release studies showed that more cumulative release of RC in     pH 6.8 phosphate buffer than in 0.1NHCl during 24 hours. The lyophilized SLN formulation was used in knowing morphology of SLNs and was found to have spherical shape with increased polydispersity by Scanning electron microscopy. Pharmacokinetic studies showed the relative oral bioavailability of SLNs was 2.2 fold when compared to that of a suspension (p<0.001). Taken together, the results are indicative of SLNs as lipid based carriers for improving the oral bioavailability of this drug by minimizing first pass metabolism.

scholarly journals INVESTIGATION OF EFFECT OF PHOSPHOLIPIDS ON PHYSICAL AND FUNCTIONAL CHARACTERIZATION OF PACLITAXEL LIPOSOMES

2017 ◽  
Vol 9 (12) ◽  
pp. 141
Author(s):  
Amol A. Tatode ◽  
Arun T. Patil ◽  
Milind J. Umekar ◽  
Darshan R. Telange
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Functional Characterization ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Stoichiometric Ratio ◽  
Hemolytic Toxicity ◽  
Vitro Release

Objective: Aim of the present investigation was to determine the effect of various synthetic grades of phospholipids on paclitaxel liposomes (PTL).Methods: The PTL formulations using various grades of phospholipids were prepared by film hydration method. The prepared PTL formulations were physicochemically characterized by entrapment efficiency (EE, %w/w), vesicular size and particle size distribution. These formulations were also characterized for function parameters such as in vitro release and hemolytic toxicity assay.Results: The synthetic grades of phospholipids significantly influenced PTL formulations. The stoichiometric ratio (1:1) between CH and various synthetic phospholipids was found to be optimized one, from rest of the ratios. The characterization confirmed the formation of PTL. The EE was observed to be high (86.67%) as increasing the ratios between CH and phospholipids but then declined suddenly as further increasing the ratio. The best liposomal formulations showed that the spherical shape was found to be within size ranging from<10 µm, with a higher rate and extent of the release, ~86.22% of paclitaxel from PTL formulation. The results of the hemolytic toxicity study demonstrated that PTL formulations with a ratio (1:1) exhibited a significantly lower hemolytic toxicity (2.70%), compared to all formulations.Conclusion: The result revealed the excellent effect of phospholipids on paclitaxel liposomes. The paclitaxel liposomes prepared with CH: PL90G ratio (1:1) was found to be optimized one. The entrapment efficiency, particle size distribution, in vitro release and hemolytic activity with this ratio shown to be excellent as compared to other ratios.

Sign in / Sign up

Export Citation Format

Share Document