Development and Characterization of Water-in-Oil Microemulsion for Transdermal Delivery of Eperisone Hydrochloride

2020 ◽  
Vol 7 (1) ◽  
pp. 45-64
Author(s):  
Monika D. Kumbhar ◽  
Manisha S. Karpe ◽  
Vilasrao J. Kadam
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Droplet Size ◽  
Ex Vivo ◽  
In Vitro Release ◽  
Tween 80 ◽  
Physical Parameters ◽  
Scanning Calorimetry ◽  
Spontaneous Emulsification

Background: Eperisone hydrochloride possesses short biological half-life due to first pass metabolism resulting in low bioavailability and short duration of response with toxic effects, ultimately limits its utilization for treatment of muscle spasm. Objective: In view of this background, current study was designed for the development of Eperisone hydrochloride-loaded microemulsion and Eperisone hydrochloride-loaded microemulsion based cream for topical delivery and compared it with conventional cream. Methods: Firstly, water-in-oil microemulsion was prepared by spontaneous emulsification method. The concentration of components was found out from existence of microemulsion region by constructing pseudoternary phase diagram. The oil was selected on the basis of drug solubility effect on the drug release, whereas surfactant and cosurfactant were screened on the basis of their efficiency to form microemulsion region. The influence of components on microemulsion formation, drug release capacity, permeation was studied by differential scanning calorimetry, X-ray diffraction, in-vitro release and ex-vivo drug permeation studies respectively. By using microemulsion, the cream was prepared for proving optimum structure for topical application. Microemulsion was evaluated for droplet size, zeta potential, pH, viscosity and conductivity. Besides the cream was characterized for pH, rheology and stability. Permeation of EPE from microemulsion across the rat skin was evaluated and compared with conventional cream. Results: The microemulsion consisting Isopropyl Myristrate/Water/Span 80:Tween 80 (50/8/42% by weight) possessed droplet size of 95.77nm, zeta potential of −5.23 mV with 7.25 pH and conductivity near to zero (<0.05mScm-1). Physical parameters of the cream were satisfactory, also 2.33-fold higher permeation and 1.57-fold higher release observed as compared to conventional cream. Conclusion: It can be concluded that Eperisone hydrochloride-loaded microemulsion and its cream is being effectively used for muscle spasticity by topical route.

scholarly journals Evaluation of Transdermal Formulations of Metoclopramide Prepared Using Arachis Oil and Liquid Paraffin as Permeation Enhancers

2020 ◽  
Author(s):  
Sylvester O. Eraga ◽  
Matthew I. Arhewoh ◽  
Ogochukwu A. Meko
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Release Kinetics ◽  
Liquid Paraffin ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Tween 80 ◽  
Patient Acceptance ◽  
Scanning Calorimetry

Background: The study aimed to evaluate the effect of arachis oil and liquid paraffin on metoclopramide release from transdermal films. Objectives: Batches of metoclopramide films were prepared with hydroxypropyl methyl cellulose (HPMC), arachis oil or liquid paraffin and Tween 80 as plasticizer. The films were evaluated for their physiochemical properties, in vitro and ex vivo drug release and drug release kinetics. Drug-excipient interactions were investigated using Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) spectroscopy. Methods: The transdermal films had a weight range of 0.22-0.24 g, folding endurance of 300-306, percentage moisture content and uptake of 2%-10% and 19%-110%, respectively and drug content of 98%-104%. There was similar condition in vitro release profile for the films but their ex vivo profiles exhibited variable drug release with the P3 (30% arachis oil) giving the highest drug (almost 100%) release.  Results: The release kinetics of metoclopramide followed the first order and Korsemeyer-Peppas models more closely as seen in their correlation coefficients (R2) of 0.9832 and 0.9560, respectively. Drug-excipient compatibility studies showed no interactions between excipients and metoclopramide. Conclusion: The formulated transdermal films showed controlled drug release over a period of 12 h. Arachis oil and liquid paraffin showed similar permeation enhancing ability. These enhanced permeation properties of the films could be helpful in the development of alternative route for metoclopramide administration in the management of emesis with improved patient acceptance.

scholarly journals Self-Nanoemulsifying Powder of Isotretinoin: Preparation and Characterization

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Hitesh Chavda ◽  
Jaimeen Patel ◽  
Gordhan Chavada ◽  
Shruti Dave ◽  
Ankini Patel ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Droplet Size ◽  
Tween 80 ◽  
Size Analysis ◽  
Scanning Calorimetry ◽  
Peg 400 ◽  
Ir Studies ◽  
Emulsification Capacity ◽  
Poorly Soluble

In the present investigation an attempt was made to enhance the solubility and dissolution of poorly soluble drug, isotretinoin, by formulating self-nanoemulsifying drug delivery system (SNEDDS). Liquid SNEDDSs were prepared using Transcutol P as oil, Tween 80 as surfactant, and PEG 400 as cosurfactant. Pseudoternary phase diagrams were constructed to identify the efficient self-nanoemulsification region. The formulation with 40% oil (Transcutol P) and 60% surfactant: cosurfactant (Tween 80: PEG 400) ratio of 1 : 1 was optimized based on evaluation parameters for droplet size analysis, self-emulsification capacity, zeta potential, and in vitro drug release performance. The optimized system contains mean droplet size of 36.60 nm and zeta potential (ζ) −26.73 mV. The optimized formulation A1 was adsorbed onto Fujicalin to produce solid SNEDDS, which exhibited good flow properties and preserved the self-emulsification properties of liquid SNEDDS. The differential scanning calorimetry, FT-IR studies of solid SNEDDS revealed transformation of isotretinoin into molecularly dissolved state in the liquid SNEDDS. In vitro dissolution profiles showed that dissolution rate of ISN from solid SNEDDS was significantly greater as compared to pure drug.

scholarly journals PREPARATION AND CHARACTERIZATION OF METFORMIN LOADED STEARIC ACID COUPLED F127 NANOPARTICLES

2018 ◽  
Vol 11 (8) ◽  
pp. 212
Author(s):  
Vipan Kumar Kamboj ◽  
Prabhakar Kumar Verma
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Stearic Acid ◽  
In Vitro Release ◽  
Particle Diameter ◽  
Class Iii ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Scanning Calorimetry

Objective: The objective of this study was to prepare and evaluate metformin nanoparticles (MN) using stearic acid-coupled F127 (SAF127) copolymer and polyvinyl alcohol by emulsion solvent evaporation technique.Method: Metformin is the first-line drug for the treatment of type II diabetes mellitus belongs to Biopharmaceutical Classification System Class III. The prepared MN was characterized for particle size, polydispersity index (PDI), zeta potential, drug entrapment, percentage yield, in vitro drug release, and stability studies. The compatibility studies were performed by Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC). The crystallographic and surface properties were studied by X-ray diffractometry and scanning electron microscopy, respectively.Results: The mean particle diameter of prepared nanoparticles ranged from 207.8 to 977.64 nm, PDI value ranged from 0.146 to 0.694, and zeta potential ranged from −20.5 to −6.97 mV. The drug entrapment efficiency of these nanoparticles varies between 18.81 to 69.01 %. The drug to SAF127 copolymer (10/30 w/w) ratio (MN3) showed optimum results. The MN3 had spherical morphology with semi-amorphous nature. The results of FTIR and DSC analysis showed that there was no significant interaction between drug and excipients. The prepared polymeric nanoparticles were stable at 5±3°C up to 3 months. In vitro release of drug from MN3 was 20.52% in the first 1 h and remaining drug was released up to 30 h.Conclusion: The results of this study confirmed the sustained drug release profile of metformin loaded SAF127 copolymer nanoparticles. These nanoparticles can be best stored up to 3 months.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

scholarly journals DEVELOPMENT OF MICROEMULSION FORMULATION FOR ORAL DELIVERY OF ROSUVASTATIN CALCIUM

2020 ◽  
pp. 35-39
Author(s):  
Himanshu Paliwal ◽  
Ram Singh Solanki ◽  
Chetan Singh Chauhan
Keyword(s):  
Zeta Potential ◽  
Droplet Size ◽  
Oral Delivery ◽  
Water Solubility ◽  
Tween 80 ◽  
In Vitro Dissolution ◽  
Microemulsion Formulation ◽  
Polyethylene Glycol 400 ◽  
Rosuvastatin Calcium

The purpose of conducting this study was to prepare an oral microemulsion formulation of Rosuvastatin calcium (RC) to improve its water solubility. Oil in water microemulsion was formulated using Oleic acid, Tween 80 and Polyethylene Glycol-400(PEG-400) as oil, surfactant and co-surfactant, respectively. The ideal proportion of surfactant: co-surfactant (Smix) was chosen by constructing pseudoternary diagrams. The microemulsion formulations which proved to be stable after thermodynamic stability testing were further evaluated for physical characteristics. Selected formulations were evaluated for droplet size, zeta potential, polydispersity index, viscosity and % drug content. The results were suggestive that optimized microemulsion formulation (F2) was thermodynamically stable and clear having a droplet size of 74.29 nm and zeta potential of -18.44.  In vitro dissolution study for optimized microemulsion was performed using a dialysis bag method and cumulative % drug release was determined. The result from the release study was indicative of improved solubility of Rosuvastatin calcium which may serve to boost up the oral bioavailability of drug.

scholarly journals pH-Responsive Liposomes of Dioleoyl Phosphatidylethanolamine and Cholesteryl Hemisuccinate for the Enhanced Anticancer Efficacy of Cisplatin

Pharmaceutics ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 129
Author(s):  
Hassan Shah ◽  
Asadullah Madni ◽  
Muhammad Muzamil Khan ◽  
Fiaz-ud-Din Ahmad ◽  
Nasrullah Jan ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Release Rate ◽  
In Vitro Release ◽  
Chemotherapeutic Agents ◽  
Ph Responsive ◽  
Scanning Calorimetry ◽  
Cholesteryl Hemisuccinate ◽  
Vitro Release

The current study aimed to develop pH-responsive cisplatin-loaded liposomes (CDDP@PLs) via the thin film hydration method. Formulations with varied ratios of dioleoyl phosphatidylethanolamine (DOPE) to cholesteryl hemisuccinate (CHEMS) were investigated to obtain the optimal particle size, zeta potential, entrapment efficiency, in vitro release profile, and stability. The particle size of the CDDP@PLs was in the range of 153.2 ± 3.08–206.4 ± 2.26 nm, zeta potential was −17.8 ± 1.26 to −24.6 ± 1.72, and PDI displayed an acceptable size distribution. Transmission electron microscopy revealed a spherical shape with ~200 nm size. Fourier transform infrared spectroscopic analysis showed the physicochemical stability of CDDP@PLs, and differential scanning calorimetry analysis showed the loss of the crystalline nature of cisplatin in liposomes. In vitro release study of CDDP@PLs at pH 7.4 depicted the lower release rate of cisplatin (less than 40%), and at a pH of 6.5, an almost 65% release rate was achieved compared to the release rate at pH 5.5 (more than 80%) showing the tumor-specific drug release. The cytotoxicity study showed the improved cytotoxicity of CDDP@PLs compared to cisplatin solution in MDA-MB-231 and SK-OV-3 cell lines, and fluorescence microscopy also showed enhanced cellular internalization. The acute toxicity study showed the safety and biocompatibility of the developed carrier system for the potential delivery of chemotherapeutic agents. These studies suggest that CDDP@PLs could be utilized as an efficient delivery system for the enhancement of therapeutic efficacy and to minimize the side effects of chemotherapy by releasing cisplatin at the tumor site.

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals Preparation and Characterization of PEG-PLA Genistein Micelles Using a Modified Emulsion-Evaporation Method

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Qiuchen Cheng ◽  
Wen Qin ◽  
Yanhong Yu ◽  
Guojian Li ◽  
Jizhou Wu ◽  
...  
Keyword(s):  
Smooth Muscle Actin ◽  
Drug Loading ◽  
In Vitro Release ◽  
Tween 80 ◽  
Original Method ◽  
Scanning Calorimetry ◽  
Experimental Conditions ◽  
Evaporation Method ◽  
Genistein Treatment

The objective of this study is to improve the bioavailability of genistein by encapsulation with polyethylene glycol-polylactic acid (PEG-PLA) copolymers. Genistein micelles (GMs) prepared using a modified emulsion-evaporation method were more stable than those made with the original method. The effect of polyvinyl alcohol, Tween 80, sonication time, PEG-PLA/genistein ratio, and organic phase (acetone)/H2O ratio on the size, polydispersity index, encapsulation efficiency, and drug loading efficiency of GMs was investigated. GMs were obtained and characterized under optimal experimental conditions. For long-term storage, GMs were lyophilized by freeze drying with trehalose to produce genistein lyophilized powder (GLP). The analysis of GLP by Fourier-transform infrared spectroscopy and differential scanning calorimetry showed that genistein was successfully incorporated into the micellar structure. In vitro release experiments revealed that the incorporation of genistein into PEG-PLA copolymers significantly improved its solubility and bioavailability. GLP was more potent in inhibiting the proliferation of HSC-T6 cells than genistein. Treatment with GLP at 10–20 μg/mL for 48 h significantly inhibited the protein expression of α-smooth muscle actin and collagen I in HSC-T6 cells compared with the control. These data demonstrated that the improved solubility and bioavailability of genistein in the form of GLP enhanced its antifibrotic effect in vitro.

Sign in / Sign up

Export Citation Format

Share Document