Output Power Enhancement of Solar PV Panel Using Solar Tracking System

2019 ◽  
Vol 12 (1) ◽  
pp. 45-49
Author(s):  
Abhishek Kumar Tripathi ◽  
Mangalpady Aruna ◽  
Ch. S.N. Murthy
Keyword(s):  
Solar Radiation ◽  
Output Power ◽  
Tracking System ◽  
The Sun ◽  
Solar Pv ◽  
Design Development ◽  
Pv Panel ◽  
Solar Tracking ◽  
Power Enhancement ◽  
Panel Surface

Solar Photovoltaic (PV) energy conversion has gained much attention nowadays. The output power of PV panel depends on the condition under which the panel is working, such as solar radiation, ambient temperature, dust, wind speed and humidity. The amount of falling sunlight on the panel surface (i.e., solar radiation) directly affects its output power. In order to maximize the amount of falling sunlight on the panel surface, a solar tracking PV panel system is introduced. This paper describes the design, development and fabrication of the solar PV panel tracking system. The designed solar tracking system is able to track the position of the sun throughout the day, which allows more sunlight falling on the panel surface. The experimental results show that there was an enhancement of up to a 64.72% in the output power of the PV panel with reference to the fixed orientation PV panel. Further, this study also demonstrates that the full load torque of the tracking system would be much higher than the obtained torque, which is required to track the position of the sun. This propounds, that the proposed tracking system can also be used for a higher capacity PV power generation system.

Design, Development and Performance Test of Two-Axis Solar Tracker System

2014 ◽  
Vol 704 ◽  
pp. 350-354
Author(s):  
Muhammad Ikram Mohd Rashid ◽  
Nik Fadhil bin Nik Mohammed ◽  
Suliana binti Ab Ghani ◽  
Noor Asiah Mohamad
Keyword(s):  
Tilt Angle ◽  
Solar Collector ◽  
Performance Test ◽  
Tracking System ◽  
Electrical Power ◽  
Solar Thermal ◽  
The Sun ◽  
Solar Pv ◽  
Design Development ◽  
Solar Tracking

The energy extracted from photovoltaic (PV) or solar thermal depends on solar insolation. For the extraction of maximum energy from the sun, the plane of the solar collector should always be normal to the incident radiation. Sun trackers move the solar collector to follow the sun trajectories and keep the orientation of the solar collector at an optimal tilt angle. Energy efficiency of solar PV or solar thermal can be substantially improved using solar tracking system. In this paper, an automatic solar tracking system has been designed and developed using DC motor on a mechanical structure with gear arrangement. The movements of two-axis solar trackers for the elevation and azimuth angles are programmed according to the mathematical calculation by using the Borland C++ Builder. Performance of the proposed system over the important parameter like solar radiation received on the collector, maximum hourly electrical power has been evaluated and compared with those for fixed tilt angle solar collector.

MEDIUM SIZE DUAL-AXIS SOLAR TRACKING SYSTEM WITH SUNLIGHT INTENSITY COMPARISON METHOD AND FUZZY LOGIC IMPLEMENTATION

2015 ◽  
Vol 77 (17) ◽  
Author(s):  
Azwaan Zakariah ◽  
Mahdi Faramarzi ◽  
Jasrul Jamani Jamian ◽  
Mohd Amri Md Yunus
Keyword(s):  
Fuzzy Logic ◽  
Solar Irradiance ◽  
Fuzzy Logic Controller ◽  
Solar Power ◽  
Tracking System ◽  
Medium Size ◽  
The Sun ◽  
Solar Pv ◽  
Pv Panel ◽  
Solar Tracking

Nowadays, renewable energy such as solar power has become important for electricity generation, and solar power systems have been installed in homes. Furthermore, solar tracking systems are being continuously improved by researchers around the world, who focus on achieving the best design and thus maximizing the efficiency of the solar power system. In this project, a fuzzy logic controller has been integrated and implemented in a medium-scale solar tracking system to achieve the best real-time orientation of a solar PV panel toward the sun. This project utilized dual-axis solar tracking with a fuzzy logic intelligent method. The hardware system consists of an Arduino UNO microcontroller as the main controller and Light Dependent Resistor (LDR) sensors for sensing the maximum incident intensity of solar irradiance. Initially, two power window motors (one for the horizontal axis and the other for the vertical axis) coordinate and alternately rotate to scan the position of the sun. Since the sun changes its position all the time, the LDR sensors detect its position at five-minute intervals through the level of incident solar irradiance intensity measured by them. The fuzzy logic controller helps the microcontroller to give the best inference concerning the direction to which the solar PV panel should rotate and the position in which it should stay. In conclusion, the solar tracking system delivers high efficiency of output power with a low power intake while it operates.

scholarly journals Improving Photovoltaic Panel (PV) Efficiency via Two Axis Sun Tracking System

2020 ◽  
Vol 26 (4) ◽  
pp. 123-140
Author(s):  
Karam Abdulwahed Kashan ◽  
Fadhil Abbas M. Al-Qrimli
Keyword(s):  
Tracking System ◽  
Simulation Software ◽  
The Sun ◽  
Photovoltaic Panel ◽  
Tracking Method ◽  
Pv Panel ◽  
Solar Tracking ◽  
Daily Energy ◽  
The Hours ◽  
Solar Position

In this paper two axis sun tracking method is used to absorb maximum power from the sun's rays on the solar panel via calculating the sun’s altitude and azimuth angles, which describe the solar position on the Iraqi capital Baghdad for the hours 6:00, 7:00, 8:00, 9:00, 12:00, 15:00 and 17:00 per day. The angles were calculated in an average approach within one month, so certain values were determined for each month. The daily energy achieved was calculated for the solar tracking method compared with the fixed tracking method. Designed, modeled and simulated a control circuit consisting of reference position truth table, PI Controller and two servomotors that tracked the sun position to adjust the PV panel perpendicular on the rays of the sun. The results obtained by a simulation software MATLAB/Simulink.

scholarly journals Rancang Bangun Panel Photovoltaic Dengan Automatic Sun Tracking System (Asts) Untuk Mengoptimalan Serapan Energi Matahari

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Belly Yan Dewantara ◽  
Daeng Rahmatullah
Keyword(s):  
Tracking System ◽  
Average Power ◽  
Electrical Equipment ◽  
Solar Panel ◽  
The Sun ◽  
Solar Panels ◽  
Traffic Light ◽  
Pv Panel ◽  
Solar Tracking ◽  
The Many

<em>Nowadays solar panel is widely used as an independent power plant, it can be seen the many applications of solar panels on electrical equipment, such as traffic light, general lighting, etc. The energi produced by solar panel is affected by the absorbed sunlight. generally solar panels are implemented statically, this causes the absorption of solar energi is not maximal in the morning and afternoon. To maximize the absorption of sunlight, solar panels must always be facing perpendicular to the position of the sun. Automatic solar tracking system is needed to solve these problems, It is makes solar panels always perpendicular to the sun and can follow the movement of the sun, so that the absorption of solar energi is more leverage. The results of the test show the use of automatic tracking system to get the maximum absorption of solar energi indicated by a more stable voltage output,and the power generated is greater than using a static solar panel. Automatic Sun Tracking System (ASTS) increase the average power up to ± 39-41 watt / day with the efficiency of ASTS 81.66% on PV panel 50 WP.</em>

scholarly journals Performance Evaluation of a Standalone Solar PV System for Electricity Generation in an Estate

2018 ◽  
Vol 2 (4) ◽  
Author(s):  
Richard Eberechi Echendu ◽  
Hachimenum Nyebuchi Amadi
Keyword(s):  
Performance Evaluation ◽  
Electricity Generation ◽  
Tracking System ◽  
Solar Pv ◽  
Pv System ◽  
Pv Panel ◽  
Solar Tracking ◽  
Efficiency Increase ◽  
Solar Pv System ◽  
Solar Tracker

This work focuses on the performance evaluation of a Standalone Solar Photovoltaic (PV) system for electricity generation in an estate requiring a daily power consumption of 50KW. This was achieved through a solar tracker software/hardware – embedded programme control system. A programmable microcontroller (PIC16F877A), light detection sensors (CDS NORP 12), motor driver IC (L293D), power relays (NTE-R22-5) and a dc gear motor with linear actuator (HARL-3618) were used. MikroC Pro compiler from Mikro Electroniker was used to programme the PIC16F877A. A fixed PV panel of same size was placed side by side and tested with the solar tracking system. The test results obtained showed that the solar tracking system produced 14.3W at 8:00am, increases to a maximum of 25.83W at 1:00pm and decreased to 16.28W at 6:00pm while the fixed PV panel produced 5W at 8:00am, increased to a maximum of 25.62W at 1:00pm and decreased to 10.6W at 6:00pm. These results gave the solar tracking system an efficiency increase of 33 percent over the fixed system. The designed system installed in residential homes has capacity to guarantee sustainable, durable and improved power supply.

scholarly journals Evaluation and Design of Power Controller of Two-Axis Solar Tracking by PID and FL for a Photovoltaic Module

2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Joel J. Ontiveros ◽  
Carlos D. Ávalos ◽  
Faustino Loza ◽  
Néstor D. Galán ◽  
Guillermo J. Rubio
Keyword(s):  
Fuzzy Logic ◽  
Output Power ◽  
Tracking System ◽  
Weather Conditions ◽  
Lower Percentage ◽  
Photovoltaic Module ◽  
The Sun ◽  
Photovoltaic Modules ◽  
Solar Tracking ◽  
Solar Tracker

Solar trackers represent an essential tool to increase the energy production of photovoltaic modules compared to fixed systems. Unlike previous technologies where the aim is to keep the solar rays perpendicular to the surface of the module and obtain a constant output power, this paper proposes the design and evaluation of two controllers for a two-axis solar tracker, which maintains the power that is produced by photovoltaic modules at their nominal value. To achieve this, mathematical models of the dynamics of the sun, the solar energy obtained on the Earth’s surface, the two-axis tracking system in its electrical and mechanical parts, and the solar cell are developed and simulated. Two controllers are designed to be evaluated in the solar tracking system, one Proportional-Integral-Derivative and the other by Fuzzy Logic. The evaluation of the simulations shows a better performance of the controller by Fuzzy Logic; this is because it presents a shorter stabilization time, a transient of smaller amplitude, and a lower percentage of error in steady-state. The principle of operation of the solar tracking system is to promote the orientation conditions of the photovoltaic module to generate the maximum available power until reaching the nominal one. This is possible because it has a gyroscope on the surface of the module that determines its position with respect to the hour angle and altitude of the sun; a data acquisition card is developed to implement voltage and current sensors, which measure the output power it produces from the photovoltaic module throughout the day and under any weather conditions. The results of the implementation demonstrate that a Fuzzy Logic control for a two-axis solar tracker maintains the output power of the photovoltaic module at its nominal parameters during peak sun hours.

scholarly journals Fabrication and Experimental Study on Two-Axis Solar Tracking

2011 ◽  
pp. 123-126
Author(s):  
Hemant Kumar Nayak ◽  
Manoj Kumar ◽  
Nagendra Prasad ◽  
Rashmi Rekha Behera
Keyword(s):  
Experimental Study ◽  
Tracking System ◽  
Low Cost ◽  
Solar Pv ◽  
Pv Panel ◽  
Solar Tracking ◽  
Fixed Axis ◽  
Control Circuits ◽  
Set Up ◽  
Maintenance Requirements

This paper presents the design and experimental study of a two axis (azimuth and Polar) automatic control solar tracking system to track solar PV panel according to the direction of beam propagation of solar radiation. The designed tracking system consists of sensor and Microcontroller with built in ADC operated control circuits to drive motor. Two steeper motors are used to move the system panel, keeping the sun’s beam at the center of the sensor. The measured variables are compared with the fixed axis. The results indicate that the energy surplus becomes about (45-56%) with atmospheric influences. In case of seasonal changes of the sun’s position there is no need to change in the hardware and software of the system. . Considering all above aspects of this tracking system it can be concluded that, it is a flexible tracking system with low cost electromechanical set-up, low maintenance requirements and ease on installation and operation.

scholarly journals Photovoltaic panels tilt angle optimization

2021 ◽  
Vol 239 ◽  
pp. 00019
Author(s):  
Kerry A. Sado ◽  
Lokman H. Hassan ◽  
Shivan Sado
Keyword(s):  
Solar Radiation ◽  
Tilt Angle ◽  
Tracking System ◽  
Incident Radiation ◽  
Solar Panels ◽  
Pv System ◽  
Total Cost ◽  
Pv Panel ◽  
Operation Costs ◽  
Solar Tracking

The tilt angle of solar panels is significant for capturing solar radiation that reaches the surface of the panel. Photovoltaic (PV) performance and efficiency are highly affected by its angle of tilt with respect to the horizontal plane. The amount of radiation reaching the surface of a PV panel changes with the changes in its tilt angle, hence adding a solar tracking system will maximize the amount of solar radiation reaching the surface of a PV panel at any time during the day, however, integrating solar tracking system will increase the total cost and maintenance of any PV system. Thus, using an optimized fixed tilt angle is the solution to element the initial, maintenance, and operation costs of a solar tracking system. Yet, the fixed angle is location-specific because it depends on the daily, monthly, and yearly location of the sun. In this study; daily, monthly and seasonally angles are calculated mathematically and the amount of incident radiation on the surface of the PV panel is measured along with its voltage. By comparing the practical measurements of the output voltage of PV panels, an optimized tilt angle is decided.

scholarly journals Optimal design of the solar tracking system of parabolic trough concentrating collectors

2020 ◽  
Vol 15 (4) ◽  
pp. 613-619
Author(s):  
Li Kong ◽  
Yunpeng Zhang ◽  
Zhijian Lin ◽  
Zhongzhu Qiu ◽  
Chunying Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Solar Radiation ◽  
Tracking System ◽  
Low Cost ◽  
Parabolic Trough ◽  
The North ◽  
Tracking Mode ◽  
Solar Tracking ◽  
East West

Abstract The present work aimed to select the optimum solar tracking mode for parabolic trough concentrating collectors using numerical simulation. The current work involved: (1) the calculation of daily solar radiation on the Earth’s surface, (2) the comparison of annual direct solar radiation received under different tracking modes and (3) the determination of optimum tilt angle for the north-south tilt tracking mode. It was found that the order of solar radiation received in Shanghai under the available tracking modes was: dual-axis tracking &gt; north-south Earth’s axis tracking &gt; north-south tilt tracking (β = 15°) &gt; north-south tilt tracking (β = 45) &gt; north-south horizontal tracking &gt; east-west horizontal tracking. Single-axis solar tracking modes feature simple structures and low cost. This study also found that the solar radiation received under the north-south tilt tracking mode was higher than that of the north-south Earth’s axis tracking mode in 7 out of 12 months. Therefore, the north-south tilt tracking mode was studied separately to determine the corresponding optimum tilt angles in Haikou, Lhasa, Shanghai, Beijing and Hohhot, respectively, which were shown as follows: 18.81°, 27.29°, 28.67°, 36.21° and 37.97°.

A Fuzzy Logic Controlled Single Axis Solar Tracking System

2015 ◽  
Vol 787 ◽  
pp. 893-898
Author(s):  
Suneetha Racharla ◽  
K. Rajan ◽  
K.R. Senthil Kumar
Keyword(s):  
Fuzzy Controller ◽  
Tracking System ◽  
Renewable Energy Sources ◽  
Energy Resource ◽  
Clean Energy ◽  
Energy Sources ◽  
Pv Panel ◽  
Solar Tracking ◽  
Simulation Results ◽  
Improved Performance

Recently renewable energy sources have gained much attention as a clean energy. But the main problem occurs with the varying nature with the day and season. Aim of this paper is to conserve the energy, of the natural resources. For solar energy resource, the output induced in the photovoltaic (PV) modules depends on solar radiation and temperature of the solar cells. To maximize the efficiency of the system it is necessary to track the path of sun in order to keep the panel perpendicular to the sun. This paper proposes the design and construction of a microcontroller-based solar panel tracking system. The fuzzy controller aims at maximizing the efficiency of PV panel by focusing the sunlight to incident perpendicularly to the panel. The system consists of a PV panel which can be operated with the help of DC motor, four LED sensors placed in different positions and a fuzzy controller which takes the input from sensors and gives output speed to motor. A prototype is fabricated to test the results and compared with the simulation results. The results show the improved performance by using a tracking system

Sign in / Sign up

Export Citation Format

Share Document