scholarly journals Residual Stress and Critical Crack Size before and after Post-Weld Heat-Treatment

2017 ◽  
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Crack Size ◽  
Post Weld Heat Treatment ◽  
Critical Crack ◽  
Before And After ◽  
Critical Crack Size ◽  
Weld Heat

Neutron and Synchrotron Diffraction Measurements of Residual Stress in Steel Weldments

2007 ◽  
Author(s):  
Anna M. Paradowska ◽  
John W. H. Price ◽  
Raafat Ibrahim
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Stress Distribution ◽  
State Of The Art ◽  
Mechanical Tests ◽  
Post Weld Heat Treatment ◽  
Synchrotron Diffraction ◽  
Before And After ◽  
Strain Stress ◽  
Weld Heat

This paper explores the use of state-of-the-art instruments such as neutron and synchrotron diffraction for evaluation of residual stress in carbon steel welded components. The study shows significant variation in transverse residual strain/stress distribution across the length of the weld. Measurements before and after post weld heat treatment are reported together with traditional mechanical tests. The changes in residual stress distribution as weld beads are added in multi-bead welds are also presented. Important practical results are: i) The start and end of the weld are the most critical parts of the weldment. Implementations of run-in and run-out (which are subsequently ground off) can minimize the residual stress at the start and end of the weld. ii) Manipulation of the sequence especially around the weld toes can minimize the value of the residual stress in that region. iii) Post weld heat treatment is very effective at reducing residual stresses.

Residual stress distributions in a P91 steel-pipe girth weld before and after post weld heat treatment

2012 ◽  
Vol 534 ◽  
pp. 663-672 ◽  
Author(s):  
S. Paddea ◽  
J.A. Francis ◽  
A.M. Paradowska ◽  
P.J. Bouchard ◽  
I.A. Shibli
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Post Weld Heat Treatment ◽  
Steel Pipe ◽  
Stress Distributions ◽  
P91 Steel ◽  
Before And After ◽  
Weld Heat

scholarly journals Optimization Study of Post-Weld Heat Treatment for 12Cr1MoV Pipe Welded Joint

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 127
Author(s):  
Zichen Liu ◽  
Xiaodong Hu ◽  
Zhiwei Yang ◽  
Bin Yang ◽  
Jingkai Chen ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Stress Reduction ◽  
Simulation Method ◽  
Post Weld Heat Treatment ◽  
Residual Stress Field ◽  
Element Analysis ◽  
Tempering Treatment ◽  
Temper Heat Treatment ◽  
Weld Heat

In order to clarify the role of different post-weld heat treatment processes in the manufacturing process, welding tests, post-weld heat treatment tests, and finite element analysis (FEA) are carried out for 12C1MoV steel pipes. The simulated temperature field and residual stress field agree well with the measured results, which indicates that the simulation method is available. The influence of post-weld heat treatment process parameters on residual stress reduction results is further analyzed. It is found that the post weld dehydrogenation treatment could not release residual stress obviously. However, the residual stress can be relieved by 65% with tempering treatment. The stress relief effect of “post weld dehydrogenation treatment + temper heat treatment” is same with that of “temper heat treatment”. The higher the temperature, the greater the residual stress reduction, when the peak temperature is at 650–750 °C, especially for the stress concentration area. The longer holding time has no obvious positive effect on the reduction of residual stress.

Determination of Critical Crack Size Utilizing a Fracture Mechanics Test in Equipment Under Fatigue

2009 ◽  
Author(s):  
Irene Garcia Garcia ◽  
Radoslav Stefanovic
Keyword(s):  
Heat Treatment ◽  
Fracture Mechanics ◽  
Crack Size ◽  
Operational Experience ◽  
Element Analysis ◽  
Critical Crack ◽  
Circumferential Welds ◽  
Fea Model ◽  
Critical Crack Size

Equipment that is exposed to severe operational pressure and thermal cycling, like coke drums, usually suffer fatigue. As a result, equipment of this sort develop defects such as cracking in the circumferential welds. Operating companies are faced with the challenges of deciding what is the best way to prevent these defects, as well as determining how long they could operate if a defect is discovered. This paper discusses a methodology for fracture mechanics testing of coke drum welds, and calculations of the critical crack size. Representative samples are taken from production materials, and are welded employing production welding procedures. The material of construction is 1.25Cr-0.5Mo low alloy steel conforming to ASME SA-387 Gr 11 Class 2 in the normalized and tempered condition (N&T). Samples from three welding procedures (WPS) are tested: one for production, one for a repair with heat treatment, and one for repair without heat treatment. The position and orientation of test specimen are chosen based on previous surveys and operational experience on similar vessels that exhibited cracks during service. Fracture mechanics toughness testing is performed. Crack finite element analysis (FEA) model is used to determine the path-independed JI-integral driving force. Methodology for the determination of critical crack size is developed.

scholarly journals Residual Stress State of X65 Pipeline Girth Welds Before and After Local and Furnace Post Weld Heat Treatment

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Yao Ren ◽  
Anna Paradowska ◽  
Bin Wang ◽  
Elvin Eren ◽  
Yin Jin Janin
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Residual Stresses ◽  
Outer Surface ◽  
Post Weld Heat Treatment ◽  
Pipe Length ◽  
Stress Profiles ◽  
Girth Welds ◽  
Welded Pipe ◽  
Weld Heat

This research investigated the effects of global (in other words, furnace-based) and local post weld heat treatment (PWHT) on residual stress (RS) relaxation in API 5L X65 pipe girth welds. All pipe spools were fabricated using identical pipeline production procedures for manufacturing multipass narrow gap welds. Nondestructive neutron diffraction (ND) strain scanning was carried out on girth welded pipe spools and strain-free comb samples for the determination of the lattice spacing. All residual stress measurements were carried out at the KOWARI strain scanning instrument at the Australian Nuclear Science and Technology Organization (ANSTO). Residual stresses were measured on two pipe spools in as-welded condition and two pipe spools after local and furnace PWHT. Measurements were conducted through the thickness in the weld material and adjacent parent metal starting from the weld toes. Besides, three line-scans along pipe length were made 3 mm below outer surface, at pipe wall midthickness, and 3 mm above the inner surface. PWHT was carried out for stress relief; one pipe was conventionally heat treated entirely in an enclosed furnace, and the other was locally heated by a flexible ceramic heating pad. Residual stresses measured after PWHT were at exactly the same locations as those in as-welded condition. Residual stress states of the pipe spools in as-welded condition and after PWHT were compared, and the results were presented in full stress maps. Additionally, through-thickness residual stress profiles and the results of one line scan (3 mm below outer surface) were compared with the respective residual stress profiles advised in British Standard BS 7910 “Guide to methods for assessing the acceptability of flaws in metallic structures” and the UK nuclear industry's R6 procedure. The residual stress profiles in as-welded condition were similar. With the given parameters, local PWHT has effectively reduced residual stresses in the pipe spool to such a level that it prompted the thought that local PWHT can be considered a substitute for global PWHT.

Design Optimisation of a Ferritic Ring Weld Specimen Using FE Modelling

2009 ◽  
Author(s):  
Christopher M. Gill ◽  
Paul Hurrell ◽  
John Francis ◽  
Mark Turski
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Finite Element ◽  
Neutron Diffraction ◽  
Stress Field ◽  
Finite Element Modelling ◽  
Post Weld Heat Treatment ◽  
Stress Fields ◽  
Element Modelling ◽  
Weld Heat

This paper describes the design optimisation of an SA508 ferritic steel ring weld specimen using FE modelling techniques. The aim was to experimentally and analytically study the effect of post weld heat treatment upon a triaxial residual stress field. Welding highly constrained geometries, such as those found in some pressure vessel joints, can lead to the formation of highly triaxial stress fields. It is thought that application of post weld heat treatments will not fully relax hydrostatic stress fields. Therefore a ferritic multi-pass ring weld specimen was designed and optimised, using 2D finite element modelling, to generate a high magnitude triaxial stress field. The specimen thickness and weld-prep geometry was optimised to produce a large hydrostatic stress field and still allow efficient use of neutron diffraction to measure the residual stress. This paper reports the development of the test specimen geometry and compares the results of welding FE analysis and neutron diffraction measurements. Welding residual stresses were experimentally determined using neutron diffraction; both before post weld heat treatment. Three dimensional moving heat source weld finite element modelling has been used to predict the residual stresses generated by the welding process used. Finite element modelling examined the effect of phase transformation upon the residual stress field produced by welding. The relaxation of welding stresses by creep during post weld heat treatment has also been modelled. Comparisons between the modelled and measured as-welded residual stress profiles are presented. This work allows discussion of the effect of post weld heat treatment of triaxial stress fields and determines if finite element modelling is capable of correctly predicting the stress relaxation.

scholarly journals Pengaruh Waktu Penahanan pada Perlakuan Panas Paska Pengelasan terhadap Ketangguhan Sambungan Las Baja

2019 ◽  
Vol 13 (2) ◽  
pp. 80
Author(s):  
Muhamad Fitri ◽  
Bambang Sukiyono ◽  
Martua Limido Simanjuntak
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Local Heating ◽  
Post Weld Heat Treatment ◽  
Impact Testing ◽  
Holding Time ◽  
Aisi 4130 ◽  
The Impact ◽  
Holding Temperature ◽  
Weld Heat

One of the welding methods that is widely used today because it is easier to operate, more practical in its use, can be used for all welding positions and more efficient is called Shield Metal Arc Welding (SMAW). In this welding, the base metal and filler metal will experience thermal cycles which lead to local heating and cooling processes resulting in residual stress and distortion in the material. This residual stress must be removed because it causes a decrease in the mechanical properties of the material. The most widely used method is the thermal method that is by Post Weld Heat Treatment (PWHT). The success of The post-weld heat treatment in removing residual stresses in PWHT is influenced by the holding time. This study aims to examine the effect of holding time on heat treatment, on the weld toughness of steel. In this study, the type of welding used was SMAW welding, the material used was steel AISI 4130, the electrodes used were LB-7018-1 standard application and AWS classification A5.1 E7018-1. The test holding temperature is 650oC. The holding time of testing uses three variables, namely: 2.5 hours, 4.5 hours, 6.5 hours. The Impact testing is done by the Charpy method. From this study, the influence of holding time variation on PWHT holding temperature on the weld strength of AISI 4130 steel was obtained.

scholarly journals Effect of Post Weld Heat Treatment on the Microstructure and Electrochemical Characteristics of Dissimilar Material Welded by Butter Method

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4512
Author(s):  
Umer Masood Chaudry ◽  
Hafiz Waqar Ahmad ◽  
Muhammad Rehan Tariq ◽  
Ameeq Farooq ◽  
Muhammad Kashif Khan ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Activation Parameters ◽  
Post Weld Heat Treatment ◽  
Dissimilar Material ◽  
Electrochemical Characteristics ◽  
Corrosion Kinetics ◽  
Before And After ◽  
C 50 ◽  
Kinetics Of ◽  
Weld Heat

In the present study, the effect of post weld heat treatment (PWHT) on the microstructure and corrosion kinetics of butter welded Nickel Alloy 617 and 12Cr steel was investigated. Buttering was carried out on the 12Cr side with the Thyssen 617 filler metal. Furthermore, post weld heat treatment (PWHT) was conducted at 730 °C with a holding time of 4 h followed by furnace cooling. Optical Microscopy (OM) was conducted to study the microstructural evolution in dissimilar material welding as a result of PWHT. Moreover, Scanning Electron Microscopy with energy dispersive spectroscopy (SEM-EDS) was employed to determine the elemental concentrations in all important regions of the butter weld before and after the PWHT. In addition, the effect of PWHT on the corrosion kinetics of the butter weld was also investigated by potentiodynamic polarization measurements in 5 wt.% NaCl + 0.5 wt.% CH3COOH electrolyte at room temperature, 30 °C, 50 °C and 70 °C. The corrosion activation parameters were also determined for both the samples by using Arrhenius plots. The results revealed the higher susceptibility of corrosion of the butter weld after PWHT, which was attributed to the reduced Cr content in the heat affected zone of the 12Cr region due to the sensitization effect of the heat treatment, resulting in higher corrosion rates.

Sign in / Sign up

Export Citation Format

Share Document