IMPLEMENTATION AND EVALUATION OF ENERGY SAVINGS FOCUSED AERATION DESIGN AND CONTROL OF SEQUENCING BATCH REACTORS IN WASHINGTON

2016 ◽  
Vol 2016 (9) ◽  
pp. 743-749
Author(s):  
Gregory J Duffy ◽  
Peter Burgoon ◽  
Steven Kestel
1992 ◽  
Vol 26 (9-11) ◽  
pp. 2523-2526 ◽  
Author(s):  
K. L. Norcross

Sequencing Batch Reactors (SBR's) offer many advantages and few disadvantages to the wastewater treatment process selection. Due to the relatively recent surge of interest in SBR's, few plants have been on-line long enough for Engineers to have developed a thorough understanding of all design aspects and considerations. The author has been involved directly in the design, equipment supply, start-up and operation of almost 60 SBR's of all sizes. About two thirds of the installations are municipal and one-third of these installations are industrial sites involving wastes from food processors, dairies, distilleries, petro-chemical manufacturers, landfill leachate, tanneries, Government munition plants and pharmaceutical manufacturers. The control of filamentous bulking has also been excellent with SBR's. This paper will consider the mechanical, process and control aspects for design of an SBR. The mechanical aspects will include HRT and basin sizing, selection of aeration equipment and effluent decanters. The process parameters discussed will include loading rates and F:M considerations, MLSS concentration, oxygen requirements and D.O. uptake rate, flow proportional aeration, the benefits of an anoxic fill cycle, and finally, nutrient removal. Control considerations are briefly discussed.


2005 ◽  
Vol 51 (9) ◽  
pp. 167-173 ◽  
Author(s):  
Andrew Shaw ◽  
John Watts ◽  
Andrew W. Fairey ◽  
Marty Iler

Sequencing batch reactors (SBR) can provide a high level of treatment and have potentially great flexibility in their modes of operation enabling the operator - in principle - to adjust the way the SBR operates to provide the desired treatment goal. In practice, however, SBRs are most often operated using simple phases with fixed time intervals. Advanced control techniques can be used to enable an SBR to realize its full treatment potential and maximize its capacity and this paper describes several online measurements and control approaches that can be used to do so. A case study is presented that demonstrates how first a process model was used to test three control options for the Daniel Island wastewater treatment facility in South Carolina, USA, followed by field testing of two approaches and the subsequent implementation of one of these to enable the plant to maximize its treatment capacity.


2016 ◽  
Vol 15 (11) ◽  
pp. 2529-2535
Author(s):  
Mohammad Reza Alavi Moghaddam ◽  
Mohammad Hakimelahi ◽  
Seyed Hossein Hashemi

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Nur Syamimi Zaidi ◽  
Johan Sohaili ◽  
Khalida Muda ◽  
Mika Sillanpää ◽  
Norelyza Hussein

AbstractLow condition of dissolved oxygen (DO) is commonly associated with sludge bulking problem that was able to disrupt the efficiency of wastewater treatment performances. Relatively, very little attention was paid to the possibility of applying magnetic field in controlling the bulking problem. Hence, this study aims to investigate the performance of magnetic field on biomass properties and its effect on biodegradation under low condition of DO. Two continuous laboratory-scale sequencing batch reactors—Reactor A (SBRA) and Reactor B (SBRB)—were setup. SBRA was equipped with the magnetic device to exhibit magnetic field of 88 mT, while SBRB acted as a control system. The results showed that the biomass concentration in SBRA was higher compared to SBRB. High biomass concentration in SBRA resulted to better settleability with mean SVI of less than 30 mL/g. SBRA also showed consistently high removal performances of organic and inorganic contents compared to SBRB. These observations confirmed that the magnetic field was able to enhance the biomass properties, which further enhance the biodegradation ability of the aerobic bacteria under low DO condition. This also indicates that under the sludge bulking circumstances, the use of magnetic field stands a great chance in maintaining high biodegradation of the treatment system.


Author(s):  
Hussain Aqeel ◽  
Mahendran Basuvaraj ◽  
Steven N. Liss

BNR granules rich in amyloid adhesins and denitrifying bacteria were formed in the SBRs that were operated with extended anoxic conditions.


Water ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 984
Author(s):  
Pedro Cisterna-Osorio ◽  
Claudia Calabran-Caceres ◽  
Giannina Tiznado-Bustamante ◽  
Nataly Bastias-Toro

This research studies the incidence of the type of substrate, soluble or particulate, in the emergence, development, and inhibition of bulking in activated sludge systems. It was evaluated using the sludge volume index (SVI), mixing liquor-suspended solids (MLSS), microscopic analysis of biomass, and effluent suspended solids (ESS). In the first experiment, four sequencing batch reactors (SBRs) were fed with soluble substrate at a fixed mass, while the mass of the particulate substrate varied, as those (saccharose mass/flour mass) ratios were 3:1, 3:2, 3:3 and 3:4., with a deficit ranging from 20 to 30% compared to the ratio recommended. The four SBRs have similar MLSS, IVL, and ESS. From day 30, with a deficit from 80 to 90%, the influents have ratios 1/1 and 1/2 until 48 days. The SBRs present IVL between 600 and 730 mL/g and ESS from 370 to 440 mg/L; unlike influents with ratios 1/3 and 1/4, they present IVL between 170 and 185 mL/g, and ESS from 260 to 270 mg/L. The favorable effect of particulate matter is categorical. In the second set of experiments, two SBRs were studied: SBR 1 fed with saccharose, and SBR 2 with flour; there is a lack of nutrients causing bulking in SBRs. Once the nutrient deficiency condition is changed in day 11 to excess, after 22 days, the SVI was 190 mL/g, ESS was 360 mg/L, and MLSS was 2000 mg/L for influents with saccharose; the influent with flour, with an SVI of 80 mL/g, ESS of 100 mg/L, and MLSS of 4000 mg/L, shows faster and more consistent recovery with the particulate substrate. Therefore, the proposal is to add particulate substrate-like flour to active sludge plants facing bulking. It is a clean, innocuous and sustainable alternative to processes that use chemical reagents.


Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2416
Author(s):  
Marina Dorokhova ◽  
Fernando Ribeiro ◽  
António Barbosa ◽  
João Viana ◽  
Filipe Soares ◽  
...  

The energy efficiency requirements of most energy-consuming sectors have increased recently in response to climate change. For buildings, this means targeting both facility managers and building users with the aim of identifying potential energy savings and encouraging more energy-responsible behaviors. The Information and Communication Technology (ICT) platform developed in Horizon 2020 FEEdBACk project intends to fulfill these goals by enabling the optimization of energy consumption, generation, and storage and control of flexible devices without compromising comfort levels and indoor air quality parameters. This work aims to demonstrate the real-world implementation and functionality of the ICT platform composed of Load Disaggregation, Net Load Forecast, Occupancy Forecast, Automation Manager, and Behavior Predictor applications. Particularly, the results obtained by individual applications during the test phase are presented alongside the specific metrics used to evaluate their performance.


Sign in / Sign up

Export Citation Format

Share Document