Regeneration dynamics in an alluvial dense ash (Fraxinus excelsior L.) stand

2001 ◽  
Vol 66 ◽  
Author(s):  
M. Tabari ◽  
N. Lust ◽  
L. Nachtergale

Broadleaves  regeneration dynamics and the succession mechanism were studied within  a    transect of 14 m x 56 m in a dense 80-year-old ash stand situated on an  alluvial soil. For this    purpose, abundance and height of all naturally regenerated species at  different development    stages were analyzed and their distribution over the juvenile and older  growth stages    determined.    The study reveals that from the main broadleaved tree species, Quercus robur and Fagus    sylvatica regeneration scarcely occur at any  growth stages. No Fraxinus excelsior regeneration,    except 1 unit, taller than sapling (1.5-4 m) can be found on this soil  type. On the contrary, Acer    pseudoplatanus represents different development  stages (seedling, sapling, thicket, small pole    and large pole) and in stand patches where an understorey is practically  lacking, its    regeneration is well developed. Results generally show that at the juvenile  and older growth    stages Acer proceeds Fraxinus and regeneration is largely  dominated by the invasive Acer. It is    expected that this succession process will continue and that Acer will overcome in the    overstorey and even gradually form an almost single-species dominating  stage. Direct    interventions are unavoidable in order to regulate the primary mixture  patterns.

Plants ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2155
Author(s):  
Bohdan Konôpka ◽  
Jozef Pajtík ◽  
Vladimír Šebeň ◽  
Peter Surový ◽  
Katarína Merganičová

The main goal of this study is to analyse and interpret interspecific differences in foliage biomass/area and woody parts biomass as well as the ratio between quantities of foliage and woody components (i.e., branches, stem and roots). The study was principally aimed at determining basic biomass allocation patterns and growth efficiency (GE) of four broadleaved species, specifically common aspen (Populus tremula L.), European hornbeam (Carpinus betulus L.), silver birch (Betula pendula Roth.) and sycamore (Acer pseudoplatanus L.) in young growth stages. We performed whole-tree sampling at 32 sites located in central and northern parts of Slovakia. We sampled over 700 trees and nearly 4900 leaves to quantify biomass of woody parts and foliage traits at leaf and tree levels. Moreover, we estimated specific leaf area in three parts of the crown, i.e., the upper, middle and lower thirds. We found that hornbeam had the largest foliage biomass and the lowest foliage area of all investigated species, while its biomass of woody parts did not differ from aspen and sycamore. Birch had the lowest biomass of woody parts, although its foliage properties were similar to those of aspen. Intraspecific differences of foliage were related to tree size and to leaf position along the vertical crown profile. Growth efficiency (GE), expressed as woody biomass production per foliage area unit, was evidently larger in hornbeam than in the other three broadleaves. We suggest that future GE modelling should utilize real values of stem diameter increment measured in a current year, bio–sociological position of trees and competition indicators as inputs. Such an approach would elucidate the role of stand structure and tree species mixture for ecological and production properties of forest stands.


2013 ◽  
Vol 15 (3) ◽  
pp. 167-178
Author(s):  
Johanna Schuler ◽  
Josephine Cueni ◽  
Heinrich Spiecker ◽  
Wen-Fu Guo

2008 ◽  
Vol 54 (No. 7) ◽  
pp. 314-320
Author(s):  
R. Petráš ◽  
J. Mecko

Production of raw wood material and its regulation has a great ecological and economic importance in every country. The aim of the paper is to analyze the prospective production of raw wood with respect to the expected basic tree species composition and assortment structure on an example of long-term development of selected indicators of forest condition in Slovakia. For this analysis we used data on the area, growing stock and planned decennial timber felling in the forests of Slovakia in 1980, 1996 and 2003. The production potential of forests was evaluated on the basis of the annual perspective allowable cut by 2020, from which the prospective production of assortments was derived using the models of assortment yield tables of tree species. The results show that in the forests of Slovakia there is an about half proportion of coniferous and half proportion of broadleaved tree species, very good structure of growing stock as well as its trend in the last years. Production of raw wood assortments for industrial processing for the years 2010–2020 is limited by the volume 6.3–6.4 mil. m<sup>3</sup>. About one half of this volume comes from coniferous and the other half from broadleaved tree species. For coniferous tree species the proportion of spruce and fir is 87% and for broadleaved tree species the proportion of beech and oak is 80%. For coniferous tree species sawmill assortments have a decisive, almost 70% proportion. Regarding broadleaved tree species, pulpwood assortments with 47% proportion prevail, although with 11% the highest quality assortments for the production of veneer from beech and oak are also significant.


2018 ◽  
Vol 142 (1-2) ◽  
pp. 31-32
Author(s):  
Igor Poljak ◽  
Joso Vukelić ◽  
Patrik Korijan ◽  
Irena Šapić ◽  
Marilena Idžojtić

Bijela, odnosno siva joha, Alnus incana (L.) Moench subsp. incana, listopadna je, jednodomna i anemofilna drvenasta vrsta iz porodice Betulaceae. Prirodno je rasprostranjena u sjevernoj, srednjoj i mjestimično južnoj Europi, zapadnom Sibiru i Turskoj, od nizinskoga pojasa do preko 1800 m nadmorske visine u alpskom području. Bijela joha je mezofilna do higrofilna vrsta koja dobro podnosi oštru planinsku i kontinentalnu klimu, a raste na karbonatnim, ali i silikatnim, pjeskovitim, šljunčanim, slabo humusnim tlima. Najčešća je u planinskim dolinama, uz potoke i rijeke gdje na vlažnim staništima s mnogim higrofilnim vrstama tvori guste, fragmentarne sastojine, često obnovljene iz panja. To su povremeno plavljeni lokaliteti uz vodotoke ili okolne padine kroz koje se postrano procjeđuje voda prema glavnom vodotoku. Prisutnost bijele johe u Hrvatskoj vezana je za dva oštro ograničena područja: sjeveroistočno, u nizinskom dijelu Hrvatske (110 do 190 m nadmorske visine) uz tok rijeke Drave; i sjeverozapadno, u alpsko-dinarskom području uz rijeku Kupu i njene pritoke (220 do 550 m nadmorske visine). U sjeveroistočnom području rasprostiru se sastojine definirane kao Equiseto hyemali-Alnetum incanae Moor 1958 (Trinajstić 1964; Franjić et al. 1999), u kojima se u odnosu na sastojine bijele johe u gorskome području kao razlikovne vrste izdvajaju: Ulmus laevis Pall., U. minor Mill., Prunus padus L., Equisetum hyemale L. i druge. Ove sastojine danas su rjeđe nego nekada, manje se koriste, a zbog nekadašnjeg načina sječe vrlo su često panjače. Nekadašnje šumske površine koje je Trinajstić istraživao (1964) danas više nisu pod šumom. Poplavne i vlažne šume u blizini urbanih središta isušuju se, a na njihovim su staništima izgrađena naselja i komunalna infrastruktura tako da su danas šume sive johe uz tok rijeke Drave u velikoj regresiji. U alpsko-dinarskom području istraživane sastojine svrstane su u šumsku zajednicu Lamio orvalae-Alnetum incanae Dakskobler 2010, a opisane su kao geografska varijanta Helleborus dumetorum (Vukelić et al. 2012, 2017). Ona se ističe mnogim vrstama iz dinarske vegetacijske zone, poput Fraxinus excelsior L., Ulmus glabra Huds., Fagus sylvatica L., Acer pseudoplatanus L., Lamium orvala L., Lunaria rediviva L., Scopolia carniolica Jacq., Helleborus dumetorum Waldst. et Kit., Knautia drymeia Heuff. subsp. drymeia i druge. Siva joha ovdje raste u kanjonu Kupe i na obalnim terasama koje su uglavnom antropogenizirane, a nekoć su bile korištene u poljoprivrednoj proizvodnji. Glavni ciljevi rada bili su utvrditi morfološku raznolikost i strukturiranost populacija bijele johe u Hrvatskoj te istražiti na koji način ekološki i geografski čimbenici utječu na varijabilnost populacija. Materijal za morfometrijsku analizu sakupljen je iz sedam prirodnih populacija – tri iz kontinentalne i četiri iz alpsko-dinarske regije (slika 1). Svaka populacija predstavljena je s 20 stabala, a svako stablo s 20 zdravih i neoštećenih listova s kratkih fertilnih izbojaka iz vanjskog, osvijetljenog dijela krošnje. Listovi su sakupljeni početkom srpnja 2016. godine, odnosno sredinom vegetacijskog razdoblja, kada su s obzirom na dimenzije i oblik u potpunosti razvijeni. Listovi su skenirani i izmjereni pomoću programa WinFolia. Ukupno je izmjereno devet lisnih značajki (slika 2). Deskriptivnim statističkim metodama utvrđena je visoka varijabilnost listova bijele johe, kao i jasan trend divergencije između kontinentalnih i alpsko-dinarskih populacija (slika 3). Najvarijabilnijim su se pokazale značajke: površina plojke, širina lista mjerena na 90 % dužine plojke i dužina peteljke. Za razliku od toga, najmanji stupanj varijabilnosti zabilježen je za varijable koje opisuju osnovu lisne plojke. Iako je trend variranja pojedinih značajki po populacijama bio sličan, u populacijama alpsko-dinarske regije zabilježena je nešto viša unutar-populacijska raznolikost. Kontinentalne populacije su imale veće vrijednosti svih mjerenih značajki lista u odnosu na populacije iz alpsko-dinarske regije. Analizom varijance, utvrđene su statistički značajne razlike između istraživanih regija te između stabla unutar populacija, dok su se populacije unutar regija razlikovale samo za četiri istraživane značajke (tablica 1). Unutarpopulacijska varijabilnost veća je od međupopulacijske varijabilnosti, što je odlika mnogih vrsta drveća. Multivarijatne analize potvrđuju postojanje jasne razlike između kontinentalnih i alpsko-dinarskih populacija bijele johe (slika 1, slika 4, tablica 3), što upućuje na mogućnost da istraživane populacije predstavljaju dva različita ekotipa. Morfološka udaljenost između populacija bila je korelirana s geografskom i ekološkom udaljenošću, što potvrđuje uzorak „isolation by distance“ i „isolation by environmental distance“. Drugim riječima, utvrđeno je da geografska udaljenost i ekološka divergencija imaju važan utjecaj na oblikovanje morfološke strukture populacija te da je ona posljedica njihove moguće lokalne prilagodbe na okolišne uvjete i njihove geografske udaljenosti (tablica 2). Dobivene spoznaje o varijabilnosti populacija mogu doprinijeti razvoju učinkovitijih planova očuvanja i gospodarenja sivom johom u Hrvatskoj. Kako bi se potvrdili dobiveni zaključci o varijabilnosti populacija sive johe dobiveni morfometrijskim metodama, istraživanja je svakako potrebno proširiti i na molekularno-biološke metode.


2020 ◽  
Vol 79 (1) ◽  
pp. 87-94
Author(s):  
Leila Romdhane ◽  
Nicola Dal Ferro ◽  
Amor Slama ◽  
Leila Radhouane

Rising temperatures and increasing water scarcity, which are already important issues, are expected to intensify in the near future due to global warming. Optimizing irrigation in agriculture is a challenge. Understanding the response of crop development stages to water deficit stress provides an opportunity for optimizing irrigation. Here we studied the response of two barley varieties (Rihane, Martin), to water deficit stress at three development stages (tillering, stem elongation, and heading) by measuring water status and grain yield components in a field experiment in Tunisia. The three stages were selected due to their importance in crop growth and grain development. Water deficit stress was initiated by withholding water for 21 days at the three stages with subsequent re-watering. Water deficit led to a progressive decrease in leaf water potential. In both varieties, heading was the stage most sensitive to water deficit. Leaf water potential measurements indicated that water deficit stress was more severe during heading, which to some extent may have influenced the comparison between growth stages. During heading, the number of ears per plant and weight of a thousand grains were reduced by more than 70% and 50%, respectively compared with stress at tillering. Comparison of yield components showed differences between the two barley varieties only when the water deficit was produced during the tillering stage.


2007 ◽  
Vol 37 (8) ◽  
pp. 1414-1426 ◽  
Author(s):  
Sebastian Hein ◽  
Heinrich Spiecker

The aim of this study was to develop models on branch characteristics for Fraxinus excelsior L. (common ash) and Acer pseudoplatanus L. (sycamore maple) based on 44 and 25 sample trees, respectively. A total of 635 ash and 334 maple branches were sampled. The data set on artificial pruning was pooled among the two species with a total of 71 branches from 16 trees. The material was used to predict (i) the time for a complete occlusion, (ii) the total radius of the occluded branch inside the trunk, (iii) the branch insertion angle, and (iv) the dead branch portion of the occluded branch. In addition, the effects of species and natural versus artificial pruning were assessed. Generalized hierarchical mixed models with univariate or multivariate approaches were used in this analysis. The diameter of the occluded branch and the stem radial increment played a dominant role as predictors. Artificial pruning led to a significant reduction in occlusion time and a shorter occluded branch radius. Only few species-specific differences were found. Simulations showed a reasonable overall behaviour of the models. The residual variation was tolerable for integrating the models into a growth simulation system.


2020 ◽  
Vol 12 (21) ◽  
pp. 9168
Author(s):  
Ferréol Berendt ◽  
Eduardo Tolosana ◽  
Stephan Hoffmann ◽  
Paula Alonso ◽  
Janine Schweier

The complexity of highly structured forests with multiple tree species, especially when coniferous and broadleaved tree species are mixed, as well as stands with extended machine operating trail spacing and inclined terrain, create challenging operational conditions for mechanized timber harvesting and extraction. Motor-manually felling trees within the midfield and bunching them at the machine operating trails, prior to the arrival of a harvester-forwarder system, is a complex operation. The aim of this study was to assess and compare tethered harvester productivities of a thinning operation, for felling and processing standing trees and for processing bunched trees, through a time study in forest stands with 40-m distances between machine operating trails. Total operational costs of the analyzed thinning operation were 69 €/m3o.b., including extraction using a multiple forwarder approach. Tree species, merchantable timber volume, and whether the trees were standing or presented as bunched logs all had a significant effect on the harvester time consumption. Moreover, harvester positioning time was significantly shorter when trees were already bunched at the machine operating trail. While the productivity of standing or bunched spruce trees did not differ significantly between the cases (approximately 18 m3o.b./productive machine hours excluding all delays (PMH0)), the productivity of standing broadleaved tree species (8.3 m3o.b./PMH0) was much lower than that of bunched trees (15.5 m3o.b./PMH0). Thus, the described timber harvesting and extraction system may be a valuable option for forest stands with high proportion of broadleaved trees.


2016 ◽  
Vol 61 (No. 3) ◽  
pp. 106-111
Author(s):  
S. Slanina ◽  
P. Natov ◽  
J. Dvořák ◽  
B. Gabrielová

Sign in / Sign up

Export Citation Format

Share Document