scholarly journals Effect on the Left-Turn Saturation Flow Rate Caused by Turning-Radius and Turning-Angle at Signalized Intersections

2002 ◽  
Vol 19 ◽  
pp. 739-744 ◽  
Author(s):  
Yoshiyuki KAWAI ◽  
Shigenori SHIKATA ◽  
Masahiko KATAKURA ◽  
Takashi OGUCHI
Keyword(s):  
Flow Rate ◽  
Signalized Intersections ◽  
Turning Angle ◽  
Left Turn ◽  
Saturation Flow Rate ◽  
Turning Radius ◽  
Saturation Flow

Investigation of saturation flow rate using video camera at signalized intersections in Jordan

2020 ◽  
Vol 11 (1) ◽  
pp. 216-226
Author(s):  
Bara’ W. Al-Mistarehi ◽  
Ahmad H. Alomari ◽  
Mohamad S. Al Zoubi
Keyword(s):  
Flow Rate ◽  
Standard Procedure ◽  
Video Camera ◽  
Signalized Intersections ◽  
Speed Limit ◽  
Local Conditions ◽  
Highway Capacity Manual ◽  
Saturation Flow Rate ◽  
Turning Radius ◽  
Saturation Flow

AbstractThis study aimed to investigate a potential list of variables that may have an impact on the saturation flow rate (SFR) associated with different turning movements at signalized intersections in Jordan. Direct visits to locations were conducted, and a video camera was used. Highway capacity manual standard procedure was followed to collect the necessary traffic data. Multiple linear regression was performed to classify the factors that impact the SFR and to find the optimal model to foretell the SFR. Results showed that turning radius, presence of camera enforcement, and the speed limit are the significant factors that influence SFR for shared left- and U-turning movements (LUTM) with R2 = 76.9%. Furthermore, the presence of camera enforcement, number of lanes, speed limit, city, traffic volume, and area type are the factors that impact SFR for through movements only (THMO) with R2 = 69.6%. Also, it was found that the SFR for LUTM is 1611 vehicles per hour per lane (VPHPL),which is less than the SFR for THMO that equals to 1840 VPHPL. Calibration and validation of SFR based on local conditions can improve the efficiency of infrastructure operation and planning activities because vehicles’ characteristics and drivers’ behavior change over time.

scholarly journals Impact of Guideline Markings on Saturation Flow Rate at Signalized Intersections

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Zhengtao Qin ◽  
Jing Zhao ◽  
Shidong Liang ◽  
Jiao Yao
Keyword(s):  
Flow Rate ◽  
Signalized Intersections ◽  
Estimation Model ◽  
Left Turn ◽  
Proposed Model ◽  
Research Goal ◽  
Saturation Flow Rate ◽  
Saturation Flow ◽  
The Impact

Many intersections around the world are irregular crossings where the approach and exit lanes are offset or the two roads cross at oblique angles. These irregular intersections often confuse drivers and greatly affect operational efficiency. Although guideline markings are recommended in many design manuals and codes on traffic signs and markings to address these problems, the effectiveness and application conditions are ambiguous. The research goal was to analyze the impact of guideline markings on the saturation flow rate at signalized intersections. An adjustment estimation model was established based on field data collected at 33 intersections in Shanghai, China. The proposed model was validated using a before–after case study. The underlying reasons for the impact of intersection guideline markings on the saturation flow rate are discussed. The results reveal that the improvement in the saturation flow rate obtained from painting guide line markings is positively correlated with the number of traffic lanes, offset of through movement, and turning angle of left-turns. On average, improvements of 7.0% and 10.3% can be obtained for through and left-turn movements, respectively.

scholarly journals Estimating saturation flow under weak discipline traffic conditions, case study: Iran

2018 ◽  
Vol 46 (2) ◽  
pp. 47-60 ◽  
Author(s):  
Maryam Dehghani-Zadeh ◽  
Mehdi Fallah Tafti
Keyword(s):  
Flow Rate ◽  
Field Data ◽  
Signalized Intersections ◽  
Optimal Timing ◽  
Effective Parameters ◽  
Highway Capacity ◽  
Left Turn ◽  
Saturation Flow Rate ◽  
Saturation Flow

Intersections, as the critical elements and the major bottleneck points of urban street networks, may have inconsistent performances in different countries. This is largely due to the fact that the factors affecting their performance e.g. driving behavior, vehicle characteristics, control methods, and environmental conditions may vary from one country to another. It is, therefore required to take into account these factors when developing or applying available models and methodologies for their capacity analysis or signal control setting. This is particularly important for the countries with heterogeneous and weak discipline traffic streams such as Iran. Meanwhile, estimating the saturation flow rate, which is a key parameter in capacity and delay analysis and in optimal timing of traffic signals, is of great importance. In this study, the possibility of identifying and or developing appropriate models for estimating the saturation flow rate at the signalized intersections in these situations has been explored. For this purpose, a case study performed at the signalized intersections located in the city of Yazd, a medium sized city located in the middle of Iran. Using the data obtained from several intersections together with the application of analytical procedures proposed by American, Australian, Canadian, Indonesian, Iranian and Malaysian highway capacity guides, the saturation flow rate was estimated from both field observations and analytical methods. A comparison of these results indicated that in the protected left-turn situations, the Australian guide produced the best comparable results with the field data. On the other hand, in the permitted left-turn situations, the method proposed in the American Highway Capacity Manual guide produced the best comparable results with the field data. Furthermore, three new models were developed for estimating the saturation flow rate in three different situations namely, unopposed mixed straight and turning traffic movements, opposed mixed straight and turning traffic movements and merely straight through movement. The effective width, traffic composition, and opposite oncoming through traffic flow were considered as the effective parameters in the proposed models. Moreover, using the multivariate regression analysis, the Passenger Car Equivalent coefficients for motorcycles and heavy vehicles were calculated as 0.51 and 2.09, respectively.

scholarly journals Effect of U-Turns and Heavy Vehicles on the Saturation Flow Rates of Left-Turn Lanes at Signalized Intersections

2020 ◽  
Vol 12 (11) ◽  
pp. 4485
Author(s):  
Abdelrahman Abuhijleh ◽  
Charitha Dias ◽  
Wael Alhajyaseen ◽  
Deepti Muley
Keyword(s):  
Flow Rate ◽  
Signalized Intersections ◽  
The State ◽  
Heavy Vehicles ◽  
Flow Rates ◽  
Left Turn ◽  
Highway Capacity Manual ◽  
Adjustment Factors ◽  
Saturation Flow Rate ◽  
Saturation Flow

The Saturation Flow Rate (SFR) is a primary measure that can be used when estimating intersection capacity. Further, the efficiency of signal control parameters also depends on the accuracy of assumed SFR values. Driver behavior, type of movement, vehicle type, intersection layout, and other factors may have a significant impact on the saturation flow rate. Thus, it is expected that driving environments that have heterogeneous driver populations with different driving habits and cultures may have different SFRs. In practice, the proposed SFRs based on US standards (Highway Capacity Manual, 2016) have been adopted in the State of Qatar without validation or calibration to consider the local road environment and the characteristics of the driving population. This study aims to empirically analyze the saturation flow rates for exclusive left-turn lanes and shared left- and U-turn lanes at two signalized intersections in Doha city, while considering the effects of heavy vehicles and U-turn maneuvers. Empirical observations revealed that the average base SFR, i.e., when the influences from heavy vehicles and U-turns were excluded, could vary approximately from 1800 vehicles per hour per lane (vphpl) to 2100 vphpl for exclusive left-turning lanes and approximately from 1800 vphpl to 1900 vphpl for shared left- and U-turning lanes. Furthermore, this study proposed different adjustment factors for heavy vehicle and U-turn percentages which can be applied in practice in designing signalized intersections, particularly in the State of Qatar.

Impact of Turning Lane Storage Length and Turning Proportions on Throughput at Oversaturated Signalized Intersections

2021 ◽  
pp. 036119812110171
Author(s):  
A. M. Tahsin Emtenan ◽  
Christopher M. Day
Keyword(s):  
Flow Rate ◽  
Cycle Length ◽  
Signal Timing ◽  
Real World Data ◽  
Left Turn ◽  
Common Response ◽  
Cycle Lengths ◽  
Saturation Flow Rate ◽  
Saturation Flow ◽  
Timing Strategies

During oversaturated conditions, common objectives of signal timing are to maximize vehicle throughput and manage queues. A common response to increases in vehicle volumes is to increase the cycle length. Because the clearance intervals are displayed less frequently with longer cycle lengths and fewer cycles, more of the total time is used for green indications, which implies that the signal timing is more efficient. However, previous studies have shown that throughput reaches a peak at a moderate cycle length and extending the cycle length beyond this actually decreases the total throughput. Part of the reason for this is that spillback caused by the turning traffic may cause starvation of the through lanes resulting in a reduction of the saturation flow rate within each lane. Gaps created by the turning traffic after a lane change may also reduce the saturation flow rate. There is a relationship between the proportions of turning traffic, the storage length of turning lanes, and the total throughput that can be achieved on an approach for a given cycle length and green time. This study seeks to explore this relationship to yield better signal timing strategies for oversaturated operations. A microsimulation model of an oversaturated left-turn movement with varying storage lengths and turning proportions is used to determine these relationships and establish a mathematical model of throughput as a function of the duration of green, storage length, and turning proportion. The model outcomes are compared against real-world data.

Hybrid Model for Estimating Permitted Left-Turn Saturation Flow Rate

1996 ◽  
Vol 1566 (1) ◽  
pp. 54-63 ◽  
Author(s):  
Gang-Len Chang ◽  
Chien-Yu Chen ◽  
Cesar Perez
Keyword(s):  
Hybrid Model ◽  
Flow Rate ◽  
Heavy Vehicle ◽  
Simulation Experiments ◽  
Left Turn ◽  
Explanatory Variables ◽  
Complex Interactions ◽  
Saturation Flow Rate ◽  
Log Linear ◽  
Saturation Flow

This study explored the integration of analytical formulations with simulation results for estimating the complex permitted saturation flow rate. The proposed hybrid model captured most tractable interactions between the permitted flow rate and the opposing flows with the widely used formulation by Drew, which serves as one of the primary explanatory variables. To further consider the complex interactions between the permitted flow rate and all other associated factors, which often are not consistent with the assumptions used in analytical derivations, this study modeled the intractable relations as multiplicative adjustment terms and estimated their parameters with log-linear regression. Such a hybrid formulation offers the flexibility to incorporate various additional critical factors on the permitted flow rate, including the variation of driving behavior, the number of opposing lanes, the progression quality, and the heavy vehicle percentage. The preliminary tests with extensive simulation experiments have shown very promising results.

scholarly journals Traffic Characteristics of Protected/Permitted Left-Turn Signal Displays

2000 ◽  
Vol 1708 (1) ◽  
pp. 28-39 ◽  
Author(s):  
David A. Noyce ◽  
Daniel B. Fambro ◽  
Kent C. Kacir
Keyword(s):  
Response Time ◽  
Flow Rate ◽  
Left Turn ◽  
Start Up ◽  
Green Ball ◽  
Lost Time ◽  
Saturation Flow Rate ◽  
Driver Understanding ◽  
Saturation Flow

At least four variations of the permitted indication in protected/permitted left-turn (PPLT) control have been developed in an attempt to improve the level of driver understanding and safety. These variations replace the green ball permitted indication with a flashing red ball, a flashing yellow ball, a flashing red arrow, or a flashing yellow arrow indication. In addition, the Manual on Uniform Traffic Control Devices allows several PPLT signal display arrangements. The variability in indication and arrangement has led to a myriad of PPLT displays throughout the United States. The level of driver understanding related to each PPLT display type, and the associated impact on traffic operations and safety, has not been quantified. A study was conducted to evaluate the operational characteristics associated with different PPLT signal displays. Specifically, the study quantified saturation flow rate, start-up lost time, response time, and follow-up headway associated with selected PPLT displays. No differences in saturation flow rate and start-up lost time were found due to the type of PPLT signal display. Saturation flow rates ranged from 1,770 to 2,400 vehicles per hour of green per lane and were related to differences in driver behavior between geographic locations. The variation in start-up lost time and response time between locations was primarily related to differences in phase sequence. The flashing red permitted indications were associated with the longest follow-up headway times, since drivers are required to stop before turning left with a flashing red permitted indication. The shortest follow-up headway was associated with the five-section cluster display using a green ball indication.

scholarly journals Estimation Impact of Capital Development Projects on Adjacent Street and Road Network in Organization of Traffic by Means of Signal Controlled Intersections

2021 ◽  
Vol 20 (6) ◽  
pp. 506-513
Author(s):  
A. V. Zedgenizov ◽  
D. V. Kapskiy ◽  
R. Yu. Lagerev
Keyword(s):  
Mathematical Model ◽  
Traffic Flow ◽  
Flow Rate ◽  
Road Network ◽  
Signalized Intersections ◽  
Cycle Phase ◽  
Saturation Flow Rate ◽  
Centers Of Mass ◽  
Saturation Flow ◽  
Demand And Capacity

The paper discusses problems of assessing the impact of mass attraction centers on the adjacent street and road network in the process of their functioning, expansion or conversion. The choice of criteria for assessing the organization of traffic flow, given in the Russian and foreign literature, has been substantiated, in particular, it is proposed to use v/c ratio for adjacent junction and corresponding level of traffic service (LOS). The main models for estimating capacity of signalized intersections are presented. The procedures of forming a mathematical model for estimating the load factor of signalized intersections is shown. The concepts of lane group capacity, total lost time per cycle, phase coefficients, saturation flow rate, and coefficients taking into account the decrease in the ideal saturation flow rate are explained. A mathematical model for estimating transport demand is presented, which allows to calculate the intensity of traffic flow to and from the center of mass attraction on the basis of the total traffic flow of correspondence, share of visitors in individual transport, average filling of individual transport, and coefficient of daily irregularity upon arrival and departure of visitors on an individual transport. An integrated mathematical model of loaf factor is proposed which includes parameters for estimating transport demand for centers of mass embarrassment and parameters that determine the signalized intersections capacity. The uniqueness of the integrated model is that it simultaneously involves parameters reflecting the demand and capacity of loading intersection. Recommendations are made on assessing the level of traffic service flows and the v/s ratio, based on the data of transport demand and capacity, adjacent to the centers of mass attraction of the road network. The presented method of estimating the LOS based on the capacity of the signalized intersections allows us to estimate the influence degree of mass attraction centers on the adjacent urban road network.

Sign in / Sign up

Export Citation Format

Share Document