scholarly journals Sintesis Nanopartikel Manganese Ferrite (MnFe2O4) dengan Metode Kopresipitasi dan Karakterisasi Sifat Kemagnetannya (Halaman 1 s.d. 7)

2015 ◽  
Vol 18 (52) ◽  
Author(s):  
Rosita Dewi Tawainella ◽  
Yuni Riana ◽  
Rusliana Fatayati ◽  
Amelliya ◽  
Takeshi Kato ◽  
...  

Telah disintesis nanopartikel magnetit dengan berbagai ukuran butir yang berbeda yang berasal dari bahan MnSO4H2O dan FeCl3.6H2O  dengan metode kopresipitasi dengan memvariasi parameter suhu dan konsentrasi NaOH. Struktur dan ukuran partikel hasil analisa X-Ray Diffraction (XRD) dan Transmission Electron Microscopy (TEM) menunjukkan bahwa nanopartikel mengkristal dengan baik dan ada ketergantungan ukuran butir nanopartikel terhadap dua variasi parameter sintesis tersebut. Ukuran butir yang dihitung menggunakan persamaan Scherrer menunjukkan bahwa ukuran butir meningkat seiring peninggkatan suhu dan berkurangnya konsentrasi NaOH. Sifat kemagnetan MnFe2O4 hasil analisa Vibrating Sample Magnetometer (VSM). Sampel dengan variasi konsentrasi NaOH, semakin kecil ukuran butir nanopartikel, medan koersivitasnya semakin rendah. Sementara untuk sampel dengan variasi suhu, semakin kecil ukuran butir, medan koersivitasnya semakin tinggi. Hasil VSM juga menunjukkan bahwa semakin tinggi kristalinitas sampel, nilai magnetisasi saturasinya semakin tinggi. Dengan demikian dapat disimpulkan bahwa ukuran butir dan kehadiran fasa pengotor hematit (α-Fe2O3) mempengaruhi sifat kemagnetan nanopartikel MnFe2O4. 

2015 ◽  
Vol 19 (56) ◽  
Author(s):  
Muflihatun ◽  
Siti Shofiah ◽  
Edi Suharyadi

Nanopartikel Nikel Ferit (NiFe2O4) telah disintesis dengan metode kopresipitasi dengan memvariasi konsentrasi NaOH dan suhu sintesis. Struktur kristal, ukuran partikel, dan morfologi dari sampel dianalisa menggunakan X-ray diffraction (XRD) dan transmission electron microscopy (TEM). Ukuran butir pada konsentrasi NaOH 3, 5, dan 10 M masing-masing adalah 5,7; 4,3; dan 4,2 nm, sedangkan pada suhu 60, 80, dan 150°C berturut-turut adalah 4,2; 4,9; dan 5,5 nm. Analisa fourier transform infrared (FTIR) menunjukkan dua puncak serapan pada rentang ~400-600 cm-1 yang terkait dengan site oktahedral dan tetrahedral pada struktur NiFe2O4. Sifat magnetik NiFe2O4 hasil analisa vibrating sample magnetometer (VSM) menunjukkan bahwa sampel berperilaku ferromagnetik dengan nilai koersivitasnya pada rentang 42-47 Oe. Sampel dengan variasi konsentrasi NaOH, koersivitasnya cenderung menurun dengan menurunnya ukuran partikel. Sementara sampel dengan variasi suhu, semakin kecil ukuran partikel, koersivitasnya cenderung meningkat. Pada 15 kOe, nilai magnetisasi terbesar (6,17 emu/g) diperoleh pada sampel dengan rasio fasa α-Fe2O3 paling rendah.


2014 ◽  
Vol 17 (51) ◽  
Author(s):  
Seveny Nuzully ◽  
Takeshi Kato ◽  
Edi Suharyadi

Nanopartikel magnetit (Fe3O4) telah berhasil disintesis menggunakan metode kopresipitasi dengan penambahan Polyethylene Glycol (PEG-4000) sebagai coating. Distribusi ukuran partikel dan sifat magnetik dari nanopartikel ini diteliti berdasarkan perbandingan massa Fe3O4 dan PEG, yaitu 1:1, 2:1, 3:1, 4:1, 1:2, dan 1:3. Distribusi ukuran partikel dikarakteristik dengan Transmission Electron Microscopy (TEM) sedangkan pengujian awal untuk mengetahui struktur kristal yang terkandung dalam sampel hasil sintesis dikarakteristik dengan X-Ray Diffraction (XRD), kemudian untuk mengetahui keberhasilan coating PEG dapat dikarakterisasi dengan menggunakan Fourier Transform Infra Red (FTIR) serta sifat magnetiknya dapat dikarakterisasi menggunakan Vibrating Sample Magnetometer (VSM). Sampel 1:1, 2:1, 3:1, 4:1, 1:2, 1:3 berturut-turut meiliki nilai Ms 37,2; 49,7; 55,2; 61,7; 27,7; 33,7 dan nilai Mr 4,8; 6,4; 6,6; 8,0; 3,3; 4,7. Hasil karakterisasi menunjukkan bahwa penambahan konsentrasi PEG mengakibatkan nilai saturation magnetic (Ms) dan remanence magnetic (Mr) turun, kecuali pada sampel dengan perbandingan 1:3.


2014 ◽  
Vol 17 (51) ◽  
Author(s):  
Seveny Nuzully ◽  
Takeshi Kato ◽  
Edi Suharyadi

Nanopartikel magnetit (Fe3O4) telah berhasil disintesis menggunakan metode kopresipitasi dengan penambahan Polyethylene Glycol (PEG-4000) sebagai coating. Distribusi ukuran partikel dan sifat magnetik dari nanopartikel ini diteliti berdasarkan perbandingan massa Fe3O4 dan PEG, yaitu 1:1, 2:1, 3:1, 4:1, 1:2, dan 1:3. Distribusi ukuran partikel dikarakteristik dengan Transmission Electron Microscopy (TEM) sedangkan pengujian awal untuk mengetahui struktur kristal yang terkandung dalam sampel hasil sintesis dikarakteristik dengan X-Ray Diffraction (XRD), kemudian untuk mengetahui keberhasilan coating PEG dapat dikarakterisasi dengan menggunakan Fourier Transform Infra Red (FTIR) serta sifat magnetiknya dapat dikarakterisasi menggunakan Vibrating Sample Magnetometer (VSM). Sampel 1:1, 2:1, 3:1, 4:1, 1:2, 1:3 berturut-turut meiliki nilai Ms 37,2; 49,7; 55,2; 61,7; 27,7; 33,7 dan nilai Mr 4,8; 6,4; 6,6; 8,0; 3,3; 4,7. Hasil karakterisasi menunjukkan bahwa penambahan konsentrasi PEG mengakibatkan nilai saturation magnetic (Ms) dan remanence magnetic (Mr) turun, kecuali pada sampel dengan perbandingan 1:3.


2011 ◽  
Vol 10 (04n05) ◽  
pp. 943-947 ◽  
Author(s):  
DIPAK MAITY ◽  
JUN DING

Here, we report single step synthesis of hydrophobic and hydrophilic Fe3O4 , ZnO , CoO and Y2O3:Eu nanoparticles via thermal decomposition of different organometallic complexes in oleylamine (OM) and tri(ethyleneglycol) (TREG) media, respectively. The crystal structure of the as-prepared nanoparticles is identified using X-ray diffraction, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Morphology of the nanoparticles is determined by transmission electron microscopy (TEM) while the magnetic properties are measured using vibrating sample magnetometer (VSM). Thermolysis of appropriate precursors in OM and TREG medium are very capable of producing the highly dispresed hydrophobic and hydrophilic nanoparticles with diverse morphologies.


Author(s):  
R. Gronsky

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.


Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.


Author(s):  
Eric O'Quinn ◽  
Cameron Tracy ◽  
William F. Cureton ◽  
Ritesh Sachan ◽  
Joerg C. Neuefeind ◽  
...  

Er2Sn2O7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction...


1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.


2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.


Sign in / Sign up

Export Citation Format

Share Document