scholarly journals Design and Development of Project Set Up for Gas Cutter for Straight Line Cutting

2021 ◽  
Vol 9 (VII) ◽  
pp. 344-353
Author(s):  
Nikhil Bhagwan Patil
Keyword(s):  
High Temperature ◽  
Machine Tool ◽  
Low Cost ◽  
Plasma Coating ◽  
Design And Development ◽  
Material Particle ◽  
Cutting Machine ◽  
Straight Line ◽  
Set Up ◽  
Molecular Bonding

The Gas Profile cutting machine is one of the essential machine tool in the workshop, in this study it has seen that when the high temperature burning flame is in contact with the material particle, the material particle melts and the inter-molecular bonding gets break off to separate the material from each other. In this paper the design of various parts required in gas cutting machine is determined & calculations are interpreted. In this project we have tried to develop a low cost and simple mechanized arrangement for plasma coating on textile rollers.

Development of a Capacitor Probe to Detect Subsurface Deterioration in Concrete

1997 ◽  
Vol 503 ◽  
Author(s):  
B. K. Diefenderfer ◽  
I. L. Al-Qadi ◽  
J. J. Yoho ◽  
S. M. Riad ◽  
A. Loulizi
Keyword(s):  
Dielectric Constant ◽  
Portland Cement ◽  
Electromagnetic Waves ◽  
Low Cost ◽  
Complex Dielectric Constant ◽  
Life Cycle Costs ◽  
Parallel Plates ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Set Up

ABSTRACTPortland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage, or chloride presence) can lead to significant reductions in maintenance costs. However, it is often too late to perform low-cost preventative maintenance by the time deterioration becomes evident. By developing techniques that would enable civil engineers to evaluate PCC structures and detect deterioration at early stages (without causing further damage), optimization of life-cycle costs of the constructed facility and minimization of disturbance to the facility users can be achieved.Nondestructive evaluation (NDE) methods are potentially one of the most useful techniques ever developed for assessing constructed facilities. They are noninvasive and can be performed rapidly. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant. The real part of the dielectric constant depicts the velocity of electromagnetic waves in PCC. The imaginary part, termed the “loss factor,” describes the conductivity of PCC and the attenuation of electromagnetic waves.Dielectric properties of PCC have been investigated in a laboratory setting using a parallel plate capacitor operating in the frequency range of 0.1 to 40.1MIHz. This capacitor set-up consists of two horizontal-parallel plates with an adjustable separation for insertion of a dielectric specimen (PCC). While useful in research, this approach is not practical for field implementation. A new capacitor probe has been developed which consists of two plates, located within the same horizontal plane, for placement upon the specimen to be tested. Preliminary results show that this technique is feasible and results are promising; further testing and evaluation is currently underway.

Fault Localization of Power-Ground Short via Signal Injection and Oscilloscope Technique

2010 ◽  
Author(s):  
Binh Nguyen
Keyword(s):  
Low Cost ◽  
Short Circuit ◽  
Fault Localization ◽  
Fault Isolation ◽  
Test Apparatus ◽  
Good Working ◽  
Signal Injection ◽  
Set Up ◽  
Non Destructive ◽  
Short Circuit Condition

Abstract For those attempting fault isolation on computer motherboard power-ground short issues, the optimal technique should utilize existing test equipment available in the debug facility, requiring no specialty equipment as well as needing a minimum of training to use effectively. The test apparatus should be both easy to set up and easy to use. This article describes the signal injection and oscilloscope technique which meets the above requirements. The signal injection and oscilloscope technique is based on the application of Ohm's law in a short-circuit condition. Two experiments were conducted to prove the effectiveness of these techniques. Both experiments simulate a short-circuit condition on the VCC3 power rail of a good working PC motherboard and then apply the signal injection and oscilloscope technique to localize the short. The technique described is a simple, low cost and non-destructive method that helps to find the location of the power-ground short quickly and effectively.

Design and development of automatic sheet metal cutting machine

2020 ◽  
Author(s):  
R. Muthu Siva Bharath ◽  
Arunkumar Gopal ◽  
I. Maria James ◽  
S. Lakshmi Sankar
Keyword(s):  
Sheet Metal ◽  
Metal Cutting ◽  
Metal Cutting Machine ◽  
Design And Development ◽  
Cutting Machine ◽  
Sheet Metal Cutting

Optimum Design for the Frame of Open Type Abrasive Flow Polish Machine

2012 ◽  
Vol 497 ◽  
pp. 89-93
Author(s):  
Liang Liang Yuan ◽  
Ke Hua Zhang ◽  
Li Min
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Finite Element Methods ◽  
Optimization Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Force Model ◽  
Optimization Analysis ◽  
Open Type ◽  
Set Up

In order to process heterotype hole of workpiece precisely, an open abrasive flow polish machine is designed, and the optimization design of machine frame is done for low cost. Firstly, basing on the parameters designed with traditional ways, three-dimensional force model is set up with the soft of SolidWorks. Secondly, the statics and modal analysis for machine body have been done in Finite element methods (FEM), and then the optimization analysis of machine frame has been done. At last, the model of rebuild machine frame has been built. Result shows that the deformation angle value of machine frame increased from 0.72′ to 1.001′, the natural frequency of the machine decreased from 75.549 Hz to 62.262 Hz, the weight of machine decreased by 74.178 Kg after optimization. It meets the strength, stiffness and angel stiffness requirement of machine, reduces the weight and cost of machine.

scholarly journals Design and Development of a Low Cost, Non-Contact Infrared Thermometer with Range Compensation

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3817
Author(s):  
Nicholas Wei-Jie Goh ◽  
Jun-Jie Poh ◽  
Joshua Yi Yeo ◽  
Benjamin Jun-Jie Aw ◽  
Szu Cheng Lai ◽  
...  
Keyword(s):  
Measurement Accuracy ◽  
Low Cost ◽  
Common Symptom ◽  
Ultrasonic Sensors ◽  
Design And Development ◽  
Infrared Thermometer ◽  
Compensation Methods ◽  
Monitoring Devices ◽  
Distance Correction

Fever is a common symptom of many infections, e.g., in the ongoing COVID-19 pandemic, keeping monitoring devices such as thermometers in constant demand. Recent technological advancements have made infrared (IR) thermometers the choice for contactless screening of multiple individuals. Yet, even so, the measurement accuracy of such thermometers is affected by many factors including the distance from the volunteers’ forehead, impurities (such as sweat), and the location measured on the volunteers’ forehead. To overcome these factors, we describe the assembly of an Arduino-based digital IR thermometer with distance correction using the MLX90614 IR thermometer and HC-SR04 ultrasonic sensors. Coupled with some analysis of these factors, we also found ways to programme compensation methods for the final assembled digital IR thermometer to provide more accurate readings and measurements.

scholarly journals Innovative passive reinforcements for the gradual stabilization of a landslide according with the observational method

Landslides ◽  
2021 ◽  
Author(s):  
Lorenzo Brezzi ◽  
Alberto Bisson ◽  
Davide Pasa ◽  
Simonetta Cola
Keyword(s):  
Monitoring System ◽  
Low Cost ◽  
Economic Losses ◽  
Fe Model ◽  
Site Conditions ◽  
Observational Method ◽  
Rainy Period ◽  
Sustainable Solutions ◽  
Before And After ◽  
Set Up

AbstractA large number of landslides occur in North-Eastern Italy during every rainy period due to the particular hydrogeological conditions of this area. Even if there are no casualties, the economic losses are often significant, and municipalities frequently do not have sufficient financial resources to repair the damage and stabilize all the unstable slopes. In this regard, the research for more economically sustainable solutions is a crucial challenge. Floating composite anchors are an innovative and low-cost technique set up for slope stabilization: it consists in the use of passive sub-horizontal reinforcements, obtained by coupling a traditional self-drilling bar with some tendons cemented inside it. This work concerns the application of this technique according to the observational method described within the Italian and European technical codes and mainly recommended for the design of geotechnical works, especially when performed in highly uncertain site conditions. The observational method prescribes designing an intervention and, at the same time, using a monitoring system in order to correct and adapt the project during realization of the works on the basis of new data acquired while on site. The case study is the landslide of Cischele, a medium landslide which occurred in 2010 after an exceptional heavy rainy period. In 2015, some floating composite anchors were installed to slow down the movement, even if, due to a limited budget, they were not enough to ensure the complete stabilization of the slope. Thanks to a monitoring system installed in the meantime, it is now possible to have a comparison between the site conditions before and after the intervention. This allows the evaluation of benefits achieved with the reinforcements and, at the same time, the assessment of additional improvements. Two stabilization scenarios are studied through an FE model: the first includes the stabilization system built in 2015, while the second evaluates a new solution proposed to further increase the slope stability.

Dynamic Analysis and Experimental Research of Laser Cutting Machines

2014 ◽  
Vol 915-916 ◽  
pp. 31-34
Author(s):  
Qing Ping Zhang ◽  
Zheng Ru Wang ◽  
Yan Fang Wang
Keyword(s):  
Machine Tool ◽  
Modal Analysis ◽  
Laser Cutting ◽  
Machining Accuracy ◽  
Dynamics Analysis ◽  
Theoretical Base ◽  
Test Results ◽  
Cutting Machine ◽  
Manufacturing Errors ◽  
Theoretical Results

Vibration is one of the most important problems in laser cutting machine tool, which causes the manufacturing errors, also influences the machining accuracy of the parts. Modal analysis can calculate vibration type of structures. The paper presents how to use the powerful FEA software ANSYS to do the modal analysis on laser cutting machine tool and also studies the undamped free vibration on laser cutting machine tool. Finally, the test results and theoretical results were compared to verify the rationality of the modal, these provide theoretical base and conditions for dynamics analysis and optimal design.

Sign in / Sign up

Export Citation Format

Share Document