Field Trials of RFID Technology for Tracking Pre-Fabricated Pipe Spools

Author(s):  
Jongchul Song ◽  
Carlos Caldas ◽  
Esin Ergen ◽  
Carl Haas ◽  
Burcu Akinci
Keyword(s):  
Author(s):  
Perry Forsythe ◽  
Alireza Ahmadian Fard Fini ◽  
Alireza Jalali Yazdi

The full benefit of prefabricated timber systems in the construction of multi-story buildings depends on integration and efficiency in the upstream logistics and supply chain. The purpose of this research is therefore to determine the potential value that the use of Radio-Frequency Identification technology (RFID) can contribute to the prefabricated construction of timber, and to undertake the basic development of a RFID tracking model for this purpose. The methods used in this study not only build on the knowledge gained from previous literature, but also include interviews with industry experts, field trial design and field trials. The research showed that the RFID tracking system's value proposition tends to be strongest where there are large scale and vertically integrated supply chains, logistics complexity between a limited number of discrete but partnered supply chain links and/or internal logistical complexity problems. Therefore, five distinct added value stages of RFID applications have been found in incoming delivery logistics, factory panel production, outgoing delivery logistics, on-site installation and third parties who can inspect the finished construction work. Application of RFID technology in prefabrication factory environments, where fixed readers can be used in predefined processes, was found promising. However, due to the temporary nature of the sites and the associated investment, the capacity for high automation levels is thought to be more limited on site.


1995 ◽  
Author(s):  
B. B. Lahey ◽  
B. Applegate ◽  
K. McBurnett ◽  
J. Biederman ◽  
L. Greenhill ◽  
...  

2007 ◽  
Author(s):  
George Bohrnstedt ◽  
Jeanne Poduska ◽  
Mike Garet ◽  
Sheppard Kellam ◽  
David Myers

2013 ◽  
Vol 10 (01) ◽  
pp. 33-37 ◽  
Author(s):  
M. Klinkman ◽  
D. Goldberg

SummaryThis paper describes the necessity of adapting the major classifications of mental disorders exemplified by the ICD-11 and the DSM-5 for the special needs of primary medical care. An earlier version of the classification – the ICD-10-PHC – is described, and the process of adapting it is described in detail. The new 28 item version of the classification is described, and the procedures to be adopted in the Field Trials to be held during 2013 are set out, together with the specific problems these field trials will address.


Author(s):  
Antonius Prasetyo Hadi

: The use of learning media is one of the critical success factors in higher education, therefore an educator must have innovation to use of learning media. The purpose of this research is to develop learning media based on the Inspiring Suit 8 on arbitration material courses of theoretical and practice for Volleyball 1 academic year 2018/2019 at IKIP Budi Utomo Malang. The existence of media will be a big successful support in learning process, so that students do not feel boredom because of the weaknesses of the lecturers, in which they are unable to provided good learning variation or even have difficulty in conveying or transferring knowledge. The research was descriptive qualitative design. The research subjects were students of Physical Education, Health, and Recreation Study Program who took volleyball theory and practice courses in the even semester academic year 2018/2019. The instruments used were the media expert review questionnaire, the learning expert questionnaire, and the trial analysis questionnaire. The questionnaire will be analyzed to see the feasibility of the developed media. Based on the data results review by media expert volleyball, media learning expert and field trials, it can be concluded that media developed is useful in learning process. In addition, it is used to provide independent motivation, which can be used in lesson for students.


2004 ◽  
Vol 52 (2) ◽  
pp. 157-163
Author(s):  
C. U. Egbo ◽  
M. A. Adagba ◽  
D. K. Adedzwa

Field trials were conducted in the wet seasons of 1997 and 1998 at Makurdi, Otukpo and Yandev in the Southern Guinea Savanna ecological zone of Nigeria to study the responses of ten soybean genotypes to intercropping. The experiment was laid out in a randomised complete block design. The genotypes TGX 1807-19F, NCRI-Soy2, Cameroon Late and TGX 1485-1D had the highest grain yield. All the Land Equivalent Ratio (LER) values were higher than unity, indicating that there is great advantage in intercropping maize with soybean. The yield of soybean was positively correlated with the days to 50% flowering, days to maturity, plant height, pods/plant and leaf area, indicating that an improvement in any of these traits will be reflected in an increase in seed yield. There was a significant genotype × yield × location interaction for all traits. This suggests that none of these factors acted independently. Similarly, the genotype × location interaction was more important than the genotype × year interaction for seed yield, indicating that the yield response of the ten soybean genotypes varied across locations rather than across years. Therefore, using more testing sites for evaluation may be more important than the number of years.


Author(s):  
Toshihiro HORI ◽  
Tomotaka WADA ◽  
Norie UCHITOMI ◽  
Kouichi MUTSUURA ◽  
Hiromi OKADA

Author(s):  
Theodora Aruan ◽  
Abdul Hamid K ◽  
Samsidar Tanjung

Abstrak: Penelitian ini bertujuan untuk: (1) mengembangkan multimedia pembelajaran pada mata kuliah Pengetahuan Alat Pengolahan dan Penyajian Makanan yang layak digunakan pada mahasiswa program studi Tata Boga. (2) mengetahui efektifitas multimedia pembelajaran pada mata kuliah Pengetahuan Alat Pengolahan dan Penyajian Makanan program studi Tata Boga. Penelitian menggunakan model pengembangan produk Borg and Gall yang dipadu dengan model desain pembelajaran dari Dick and Carey. Metode penelitian ini terdiri dari dua tahapan, yang mana pada tahap I merupakan tahap uji coba produk yang terdiri dari: (1) validasi ahli desain pembelajaran, (2) validasi ahli materi pelajaran, (3) validasi ahli media pembelajaran, (4) uji coba perorangan, (5) uji coba kelompok kecil, dan (6) uji coba lapangan terbatas. Hasil penelitian menunjukkan: (1) uji ahli desain pembelajaran berada pada kualifikasi sangat baik (82,17%), (2) uji ahli materi berada pada kualifikasi sangat baik (89,5%), (3) uji ahli media berada pada kualifikasi sangat baik (85%), (4) uji coba perorangan berada pada kualifikasi sangat baik (87%),  (5) uji coba kelompok kecil berada pada kualifikasi sangat baik (86%), dan (6) uji coba lapangan terbatas berada pada kualifikasi sangat baik (83,8%). Kata Kunci: multimedia, pembelajaran, pengetahuan alat pengolahan dan penyajian makanan Abstract: This study aims to: (1) develop learning multimedia in the subject of Knowledge Processing and Presentation Tools that are suitable for use in culinary study program students. (2) knowing the effectiveness of learning multimedia in the subject of Food Processing and Food Processing Program Knowledge and Processing Tools. The study used the Borg and Gall product development model combined with learning design models from Dick and Carey. This research method consists of two stages, which in stage I is the product testing phase which consists of: (1) validation of learning design experts, (2) expert material validation, (3) validation of learning media experts, (4) test try individuals, (5) small group trials, and (6) limited field trials. The results showed: (1) the learning design expert test was in very good qualification (82.17%), (2) the material expert test was in very good qualification (89.5%), (3) the media expert test was in the qualification very good (85%), (4) individual trials are in very good qualifications (87%), (5) small group trials are in very good qualifications (86%), and (6) limited field trials are at very good qualification (83.8%). Keywords: multimedia, learning, knowledge of processing and serving food


Sign in / Sign up

Export Citation Format

Share Document