scholarly journals FORMULATION AND EVALUATION OF ACYCLOVIR LOADED NOVEL NANO-EMULSION GEL FOR TOPICAL TREATMENT OF HERPES SIMPLEX VIRAL INFECTIONS

2018 ◽  
Vol 8 (5-s) ◽  
pp. 265-270
Author(s):  
Swati Patel ◽  
Prabhat Jain ◽  
Geeta Parkhe
Keyword(s):  
Herpes Simplex ◽  
Zeta Potential ◽  
Viral Infections ◽  
In Vitro Release ◽  
Stability Study ◽  
Oral Drug ◽  
Drug Content ◽  
Nanoemulsion Gel ◽  
In Vitro Diffusion

Acyclovir has low bioavailability mainly due to low solubility. This study aimed to formulate an optimized acyclovir (ACV) nanoemulsion gel for the slow, variable and incomplete oral drug absorption in patient suffering from herpes simplex viral infection. The dispersion solubility of acyclovir was studied in various oils, surfactants and co-surfactants and by constructing pseudo phase ternary diagram nanoemulsion area was identified. The optimized formulations of nanoemulsions were subjected to thermodynamic stability tests. After stability study, stable formulation was characterized for droplet size, pH determination, centrifugation, % drug content in nanoemulsion, Zeta Potential and Vesicle size measurement and than nanoemulsion gel were prepared and characterized for spreadability, measurement of viscosity, drug content, In-vitro diffusion, in-vitro release data. Span 40 was selected as surfactant, PEG 400 as co surfactant and castor oil as oil component based on solubility study. The in vitro drug release from acyclovir nanoemulsion gel was found to be considerably higher in comparison to that of the pure drug. The in-vitro diffusion of nanoemulsion gel was significantly good. Based on this study, it can be concluded the solubility and permeability of acyclovir can be increased by formulating into nanoemulsion gel. Keywords: Acyclovir, Nanoemulsion, In-vitro diffusion, Zeta potential, Stability

scholarly journals THERAPEUTIC MICROEMULSION OF CURCUMIN FOR THE MANAGEMENT OF OSTEOARTHRITIS

2018 ◽  
Vol 8 (5-s) ◽  
pp. 341-347
Author(s):  
Shreyasi Sharma ◽  
Eisha Ganju ◽  
Neeraj Upmanyu ◽  
Prabhat Jain
Keyword(s):  
Oleic Acid ◽  
Zeta Potential ◽  
Antioxidant Activities ◽  
In Vitro Release ◽  
Tween 80 ◽  
Drug Content ◽  
In Vitro Diffusion ◽  
Span 80 ◽  
Microemulsion Gel

Curcumin (diferuloylmethane) is a natural polyphenolic compound with potent anti-inflammatory, anticancer and antioxidant activities. However, its bioavailability is low as it is poorly absorbed in the gastrointestinal tract. Microemulsions offer the potential to improve the solubility and bioavailability of bioactive compounds; the present work investigated the topical delivery potential of microemulsion gel loaded with curcumas. Curcumin microemulsion was prepared by spontaneous emul­sification method using oil (Oleic acid), surfactant:cosurfactant (Smix) (Ethanol and Tween 80, Span 80 and n Butanol) and water. The optimized formulations of microemulsions were subjected to thermodynamic stability tests. After stability study, stable formulation was characterized for droplet size, pH determination, centrifugation, % drug content in microemulsion, zeta potential and vesicle size measurement and then microemulsion gel were prepared and characterized for spreadability, measurement of viscosity, drug content, In-vitro diffusion, in-vitro release data. Tween 80, Span 80 was selected as surfactant, ethanol, n Butanol as co surfactant and Oleic acid as oil component based on solubility study. The optimized formulation contained Curcumin (10 mg). The in vitro drug release from curcumin microemulsion gel was found to be considerably higher in comparison to that of the pure drug. The in-vitro diffusion of microemulsion gel was significantly good. Based on this study, it can be concluded the solubility and permeability of curcumin can be increased by formulating into microemulsion gel. Keyword: Curcumin, Microemulsion, In-vitro diffusion, Spreadability, Zeta potential, Stability, span 40

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals Development and Evaluations of Transdermally Delivered Luteolin Loaded Cationic Nanoemulsion: In Vitro and Ex Vivo Evaluations

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1218
Author(s):  
Mohammad A. Altamimi ◽  
Afzal Hussain ◽  
Sultan Alshehri ◽  
Syed Sarim Imam ◽  
Usamah Abdulrahman Alnemer
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Transdermal Delivery ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Oral Drug ◽  
In Vitro Drug Release ◽  
Drug Deposition ◽  
Drug Content

Introduction: Luteolin (LUT) is natural flavonoid with multiple therapeutic potentials and is explored for transdermal delivery using a nanocarrier system. LUT loaded cationic nanoemulsions (CNE1–CNE9) using bergamot oil (BO) were developed, optimized, and characterized in terms of in vitro and ex vivo parameters for improved permeation. Materials and methods: The solubility study of LUT was carried out in selected excipients, namely BO, cremophor EL (CEL as surfactant), labrasol (LAB), and oleylamine (OA as cationic charge inducer). Formulations were characterized with globular size, polydispersity index (PDI), zeta potential, pH, and thermodynamic stability studies. The optimized formulation (CNE4) was selected for comparative investigations (% transmittance as %T, morphology, chemical compatibility, drug content, in vitro % drug release, ex vivo skin permeation, and drug deposition, DD) against ANE4 (anionic nanoemulsion for comparison) and drug suspension (DS). Results: Formulations such as CNE1–CNE9 and ANE4 (except CNE6 and CNE8) were found to be stable. The optimized CNE4 based on the lowest value of globular size (112 nm), minimum PDI (0.15), and optimum zeta potential (+26 mV) was selected for comparative assessment against ANE4 and DS. The %T values of CNE1–CNE9 were found to be ˃95% and CEL content slightly improved the %T value. The spherical CNE4 was compatible with excipients and showed % total drug content in the range of 97.9–99.7%. In vitro drug release values from CNE4 and ANE4 were significantly higher than DS. Moreover, permeation flux (138.82 ± 8.4 µg/cm2·h), enhancement ratio (8.23), and DD (10.98%) were remarkably higher than DS. Thus, ex vivo parameters were relatively high as compared to DS which may be attributed to nanonization, surfactant-mediated reversible changes in skin lipid matrix, and electrostatic interaction of nanoglobules with the cellular surface. Conclusion: Transdermal delivery of LUT can be a suitable alternative to oral drug delivery for augmented skin permeation and drug deposition.

scholarly journals Enhancement of Oral Bioavailability of Puerarin by Polybutylcyanoacrylate Nanoparticles

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Lixia Zhao ◽  
Anchang Liu ◽  
Min Sun ◽  
Jinsong Gu ◽  
Haigang Wang ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Spherical Shape ◽  
Oral Drug ◽  
Burst Release ◽  
Vitro Release

The interest using novel drug delivery systems to improve oral bioavailability of drug with poor solubility is increasing. In this study, a new oral delivery system, polybutylcyanoacrylate nanoparticles (PBCNs), was introduced to improve the oral bioavailability of puerarin (PUE). PUE-loaded PBCN was successfully prepared by anionic polymerization method. Characterization of PUE-loaded PBCN was evaluated with morphology, size, zeta potential, and in vitro release study. The PBCN loading PUE exhibited a spherical shape under transmission electron microscopy with an average size of 159.4 nm, and the zeta potential was −15.0 mV. The in vitro release of PUE-loaded PBCN showed an initial burst release followed by a sustained release. Physicochemical state of PUE in PBCN was investigated by differential scanning colorimetry, X-ray diffraction, and Fourier transform infrared spectroscopy. The results indicated that PUE in PBCN was in a noncrystalline state. The oral pharmacokinetic study in rats showed that the relative bioavailability of PUE-encapsulated PBCN to the crude PUE was more than 550%. It can be concluded that PBCN as an oral drug carrier can significantly improve the oral bioavailability of PUE.

scholarly journals FORMULATION AND EVALUATION OF NANOSTRUCTURED LIPID CARRIERS BASED ANTI-INFLAMMATORY GEL FOR TOPICAL DRUG DELIVERY SYSTEM

2019 ◽  
pp. 286-291
Author(s):  
ROHINI S KHARWADE ◽  
NILESH M MAHAJAN
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Stability Study ◽  
Nanostructured Lipid Carrier ◽  
Topical Gel ◽  
Rat Paw Edema

Objective: Nanostructured lipid carrier (NLC)-based topical gel of lornoxicam (LXM) was formulated with the aim of controlled release action and to reduce systemic side effect for the treatment of an arthritic condition. Methods: NLCs developed using high-pressure homogenization method and optimized using a 32 factorial design with response surface methodology using design expert software. NLCs were characterized for particle size, zeta potential analysis, drug entrapment efficiency, and in vitro drug release studies to select the optimized formulation. The NLCs were suitably gelled and evaluated with respect to homogeneity, pH, viscosity, gel strength, spreadability, rheological characteristics, drug content, in vitro diffusion, and stability study. Safety of the NLC-based gel was assessed using primary skin irritation studies, and efficacy was confirmed using carrageenan-induced rat paw edema model. Results: NLCs formulation comprising 2% of lipid (60:40) and surfactant (1.50%) was confirmed as an optimized batch having a particle size (138.2±3.60 nm) with polydispersibility index value 0.344±0.034. The zeta potential value indicates good physical stability. Based on the results from the in vitro release study it was shown that the formed gels had the ability to extend release of LXM for 24 h and showing percentage drug release of 90.92%±1.96% at the end of 24 h. Skin irritation studies revealed that the optimized gel formulation shows no erythema, edema, or ulceration. Conclusion: The overall results of the present study clearly indicated promising potentials of NLC-based gel for delivering LXM topically over the conventional gel.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

Development and In Vitro Characterization of Paclitaxel Loaded Solid Lipid Nanoparticles

2019 ◽  
Vol 9 (1) ◽  
pp. 76-85 ◽  
Author(s):  
R. Nithya ◽  
K. Siram ◽  
R. Hariprasad ◽  
H. Rahman
Keyword(s):  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Release Profile ◽  
Mcf7 Cells ◽  
Solid Lipid ◽  
Cancerous Cells ◽  
Vitro Release

Background: Paclitaxel (PTX) is a potent anticancer drug which is highly effective against several cancers. Solid lipid nanoparticles (SLNs) loaded with anticancer drugs can enhance its toxicity against tumor cells at low concentrations. Objective: To develop and characterize SLNs of PTX (PSLN) to enhance its toxicity against cancerous cells. Method: The solubility of PTX was screened in various lipids. Solid lipid nanoparticles of PTX (PSLN) were developed by hot homogenization method using Cutina HR and Gelucire 44/14 as lipid carriers and Solutol HS 15 as a surfactant. PSLNs were characterized for size, morphology, zeta potential, entrapment efficiency, physical state of the drug and in vitro release profile in 7.4 pH phosphate buffer saline (PBS). The ability of PTX to enhance toxicity towards cancerous cells was tested by performing cytoxicity assay in MCF7 cell line. Results: Solubility studies of PTX in lipids indicated better solubility when Cutina HR and Gelucire 44/14 were used. PSLNs were found to possess a neutral zeta potential with a size range of 155.4 ± 10.7 nm to 641.9 ± 4.2 nm. In vitro release studies showed a sustained release profile for PSLN over a period of 48 hours. SLNs loaded with PTX were found to be more toxic in killing MCF7 cells at a lower concentration than the free PTX.

scholarly journals Eluxadoline Loaded Solid Lipid Nanoparticles for Improved Colon Targeting in Rat Model of Ulcerative Colitis

2020 ◽  
Vol 13 (9) ◽  
pp. 255
Author(s):  
Md. Khalid Anwer ◽  
Mohammed Muqtader Ahmed ◽  
Mohammed F. Aldawsari ◽  
Saad Alshahrani ◽  
Farhat Fatima ◽  
...  
Keyword(s):  
Ulcerative Colitis ◽  
Acetic Acid ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Stability Studies ◽  
Solid Lipid ◽  
Vitro Release

The aim of the current study was to evaluate the therapeutics potential of eluxadoline (ELX) loaded solid lipid nanoparticles (SLNs) in ulcerative colitis. ELX loaded SLNs were prepared using three different lipids according to the solvent emulsification technique. The optimization of prepared SLNs (F1-F3) were carried out based on size, PDI, zeta potential, percent drug entrapment (%EE), and loading (%DL). The lipid (stearic acid) based SLNs (F2) was optimized with particle size (266.0 ± 6.4 nm), PDI (0.217 ± 0.04), zeta potential (31.2 ± 5.19 mV), EE (65.0 ± 4.8%), and DL (4.60 ± 0.8%). The optimized SLNs (F2) was further evaluated by DSC, FTIR, SEM, in vitro release, and stability studies, which confirmed the successful encapsulation of ELX in SLNs. The efficacy of optimized SLNs (F2) in comparison to the pure ELX drug was assessed in acetic acid induced colitis rat models. It was observed that the delivery of ELX by SLNs alleviated the induced acetic acid colitis significantly. Thus, ELX loaded SLNs delivery to the colon has a significant potential to be developed for the treatment of ulcerative colitis.

DESIGN, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE NASAL IN SITU GELLING FORMULATIONS OF VENLAFAXINE HYDROCHLORIDE FOR BRAIN TARGETTING

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 25-31
Author(s):  
M Priyanka ◽  
◽  
F. S. Dasankoppa ◽  
H. N Sholapur ◽  
NGN Swamy ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Linear Regression Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Drug Content ◽  
Venlafaxine Hydrochloride ◽  
In Situ Gelling

The poor bioavailability and the therapeutic effectiveness exhibited by the anti-depressant venlafaxine hydrochloride on oral administration is overcome by the use of ion-activated gel forming systems that are instilled as drops; these undergo gelation in the nasal cavity. The present study describes the design, characterization and evaluation of mucoadhesive nasal in situ gelling drug delivery of venlafaxine hydrochloride using different polymers like sodium alginate, HPMC and pectin in various concentrations. DSC studies revealed compatibility of the drug and excipients used. The in situ gels were characterized for physicochemical parameters, gelling ability, rheological studies, drug content, drug entrapment efficiency, in vitro mucoadhesive strength, water holding capacity, gel expansion coefficient and in vitro drug release studies. The amount of polymer blends was optimized using 23 full factorial design. The influence of experimental factors on percentage cumulative drug release at the end of 2 and 8 hours were investigated to get optimized formulation. The responses were analyzed using ANOVA and polynomial equation was generated for each response using multiple linear regression analysis. Optimized formulation, F9, containing 1.98% w/V sodium alginate, 0.64% w/V hydroxylpropyl methylcellulose, 0.99% w/V pectin showed percentage cumulative drug release of 19.33 and 80.44 at the end of 2 and 8 hours, respectively, which were close to the predicted values. The optimized formulation was subjected to stability study for three months at 300C /75% RH. The stability study revealed no significant change in pH, drug content and viscosity. Thus, venlafaxine hydrochloride nasal mucoadhesive in situ gel could be successfully formulated to improve bioavailability and to target the brain.

scholarly journals EVALUATION OF STABILITY OF ROPINIROLE HYDROCHLORIDE AND PRAMIPEXOLE DIHYDROCHLORIDE MICROSPHERES AT ACCELERATED CONDITION

2018 ◽  
Vol 10 (4) ◽  
pp. 82
Author(s):  
Koyel Kar ◽  
R. N. Pal ◽  
Gouranga Nandi
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Shelf Life ◽  
Stability Study ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Ropinirole Hydrochloride ◽  
Pramipexole Dihydrochloride

Objective: The objective of the present work was to conduct accelerated stability study as per international council for harmonisation (ICH) guidelines and to establish shelf life of controlled release dosage form of ropinirole hydrochloride and pramipexole dihydrochloride microspheres for a period of 6 mo.Methods: Most optimized batch of ropinirole hydrochloride and pramipexole dihydrochloride (F12 and M12 respectively) were selected and subjected to exhaustive stability testing by keeping the sample in stability oven for a period of 3 and 6 mo. Various parameters like surface morphology, particle size, drug content, in vitro drug release and shelf life were evaluated at 3 and 6 mo period. The surface morphology of the formulated microspheres was determined by scanning electron microscopy (SEM). The particle size of the microspheres was estimated by optical microscopy method. The drug content was assayed by the help of ultra-violet spectrophotometer (UV). The in vitro drug release was performed by using Paddle II type dissolution apparatus and the filtrate was analyzed by UV spectrophotometer. The shelf life of the optimized microspheres was calculated by using the rate constant value of the zero-order reaction.Results: A minor change was recorded in average particle size of F12 and M12 microspheres after storage for 6 mo. For F12 and M12, initially the particle size was 130.00 µm and 128.92 µm respectively and after 6 mo it was found to be 130.92 µm and 128.99 µm respectively. There was no change in surface morphology of F12 and M12 microspheres after 6 mo of storage. The shape of microspheres remained spherical and smooth after 6 mo. An insignificant difference of drug content was recorded after 6 mo compared to the freshly prepared formulation. For F12 and M12, 94.50% and 93.77% of the drug was present initially and after 6 mo 94.45% and 93.72% of the drug was recorded. In vitro drug release was recorded after 6 mo for F12 and M12. Initially, 97.99% and 97.69% of the drug was released till 14th hour respectively for F12 and M12. After 6 mo, 98.23% and 97.99% of the drug was released respectively. The percentage residual drug content revealed that the degradation of microspheres was low. Considering the initial percentage residual drug content as 100%, 99.94% of the drug was recorded for both F12 and M12. The shelf life for F12 and M12 was found to be 10 y 52 d and 10 y 70 d respectively which were determined by the zero-order kinetic equation.Conclusion: A more or less similar surface morphology, particle size, drug content and percent of drug release before and after stability study confirmed the stability of F12 and M12 microspheres after storage for 6 mo and prove the efficacy of the microspheres in the site-specific delivery of drugs in Parkinson’s disease.

Sign in / Sign up

Export Citation Format

Share Document