scholarly journals Optimal allocation of quantum resources

Quantum ◽  
2021 ◽  
Vol 5 ◽  
pp. 407
Author(s):  
Roberto Salazar ◽  
Tanmoy Biswas ◽  
Jakub Czartowski ◽  
Karol Życzkowski ◽  
Paweł Horodecki
Keyword(s):  
Optimal Allocation ◽  
Quantum Information Processing ◽  
Proportional Fairness ◽  
Allocation Of Resources ◽  
Science And Engineering ◽  
Quantum Networks ◽  
Practical Applications ◽  
Wide Range ◽  
Potential Impact ◽  
Quantum Internet

The optimal allocation of resources is a crucial task for their efficient use in a wide range of practical applications in science and engineering. This paper investigates the optimal allocation of resources in multipartite quantum systems. In particular, we show the relevance of proportional fairness and optimal reliability criteria for the application of quantum resources. Moreover, we present optimal allocation solutions for an arbitrary number of qudits using measurement incompatibility as an exemplary resource theory. Besides, we study the criterion of optimal equitability and demonstrate its relevance to scenarios involving several resource theories such as nonlocality vs local contextuality. Finally, we highlight the potential impact of our results for quantum networks and other multi-party quantum information processing, in particular to the future Quantum Internet.

The opportunity cost of information: an economic framework for understanding the balance between assessment and control in sea lamprey (Petromyzon marinus) management

2010 ◽  
Vol 67 (1) ◽  
pp. 209-216 ◽  
Author(s):  
Eli P. Fenichel ◽  
Gretchen J.A. Hansen
Keyword(s):  
Optimal Allocation ◽  
Petromyzon Marinus ◽  
Empirical Work ◽  
Sea Lamprey ◽  
Allocation Of Resources ◽  
Trade Off ◽  
Management Actions ◽  
Trade Offs ◽  
Wide Range ◽  
And Control

Fisheries managers must make trade-offs between competing management actions; however, the inherent trade-offs associated with information gathering are seldom explicitly considered. Incorporating economics into management decisions at the outset can aid managers in explicitly considering the trade-off between collecting more information to guide management and taking management actions. We use control of the invasive sea lamprey ( Petromyzon marinus ) in the Laurentian Great Lakes to illustrate how budget constraints shape this trade-off. Economic theory is used to frame previous empirical work showing that reducing the allocation of resources to conducting assessment, and thereby freeing resources for treatment, would result in a greater reduction of sea lamprey populations — the overarching management objective. The optimal allocation of resources between assessment and control depends on the total budget, the relative cost of each management activity, the marginal reduction in uncertainty associated with increased assessment, and the marginal effectiveness of increased treatment. Formal incorporation of prior information can change the optimal allocation of resources. The approach presented here is generally applicable to a wide range of fishery management and research questions.

A New Detector System For The HB5 Stem Instrument

1985 ◽  
Vol 43 ◽  
pp. 134-135
Author(s):  
J.M. Cowley
Keyword(s):  
Dark Field ◽  
Detector System ◽  
Electron Holography ◽  
Small Specimen ◽  
Bright Field ◽  
Multiple Images ◽  
Practical Applications ◽  
Wide Range ◽  
Diffraction Patterns ◽  
Operational Modes

The HB5 STEM instrument at ASU has been modified previously to include an efficient two-dimensional detector incorporating an optical analyser device and also a digital system for the recording of multiple images. The detector system was built to explore a wide range of possibilities including in-line electron holography, the observation and recording of diffraction patterns from very small specimen regions (having diameters as small as 3Å) and the formation of both bright field and dark field images by detection of various portions of the diffraction pattern. Experience in the use of this system has shown that sane of its capabilities are unique and valuable. For other purposes it appears that, while the principles of the operational modes may be verified, the practical applications are limited by the details of the initial design.

scholarly journals More for less: predicting and maximizing genomic variant discovery via Bayesian nonparametrics

Biometrika ◽  
2021 ◽  
Author(s):  
Lorenzo Masoero ◽  
Federico Camerlenghi ◽  
Stefano Favaro ◽  
Tamara Broderick
Keyword(s):  
Optimal Allocation ◽  
Bayesian Nonparametrics ◽  
Allocation Of Resources ◽  
Experimental Conditions ◽  
Follow Up Study ◽  
Variant Discovery ◽  
Fixed Budget ◽  
The Cost ◽  
Genomic Variant

Abstract While the cost of sequencing genomes has decreased dramatically in recent years, this expense often remains non-trivial. Under a fixed budget, scientists face a natural trade-off between quantity and quality: spending resources to sequence a greater number of genomes or spending resources to sequence genomes with increased accuracy. Our goal is to find the optimal allocation of resources between quantity and quality. Optimizing resource allocation promises to reveal as many new variations in the genome as possible. In this paper, we introduce a Bayesian nonparametric methodology to predict the number of new variants in a follow-up study based on a pilot study. When experimental conditions are kept constant between the pilot and follow-up, we find that our prediction is competitive with the best existing methods. Unlike current methods, though, our new method allows practitioners to change experimental conditions between the pilot and the follow-up. We demonstrate how this distinction allows our method to be used for more realistic predictions and for optimal allocation of a fixed budget between quality and quantity.

scholarly journals Ring-Forming Polymerization toward Perfluorocyclobutyl and Ortho-Diynylarene-Derived Materials: From Synthesis to Practical Applications

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1486
Author(s):  
Eugene B. Caldona ◽  
Ernesto I. Borrego ◽  
Ketki E. Shelar ◽  
Karl M. Mukeba ◽  
Dennis W. Smith
Keyword(s):  
Chemical Resistance ◽  
Structural Features ◽  
Review Article ◽  
Aryl Ether ◽  
Aromatic Rings ◽  
Practical Applications ◽  
Repeat Units ◽  
Wide Range ◽  
Synthetic Routes ◽  
The Cost

Many desirable characteristics of polymers arise from the method of polymerization and structural features of their repeat units, which typically are responsible for the polymer’s performance at the cost of processability. While linear alternatives are popular, polymers composed of cyclic repeat units across their backbones have generally been shown to exhibit higher optical transparency, lower water absorption, and higher glass transition temperatures. These specifically include polymers built with either substituted alicyclic structures or aromatic rings, or both. In this review article, we highlight two useful ring-forming polymer groups, perfluorocyclobutyl (PFCB) aryl ether polymers and ortho-diynylarene- (ODA) based thermosets, both demonstrating outstanding thermal stability, chemical resistance, mechanical integrity, and improved processability. Different synthetic routes (with emphasis on ring-forming polymerization) and properties for these polymers are discussed, followed by their relevant applications in a wide range of aspects.

scholarly journals Sensing of Nickel(II) Ions by Immobilizing Ligands and Using Different SPEs

2021 ◽  
Vol 6 (1) ◽  
pp. 2
Author(s):  
Liliana Anchidin-Norocel ◽  
Sonia Amariei ◽  
Gheorghe Gutt
Keyword(s):  
Bismuth Oxide ◽  
Human Population ◽  
Raw Materials ◽  
Sensor Technology ◽  
Cyclic Voltammogram ◽  
Accurate Analysis ◽  
Nickel Allergy ◽  
Nickel Ions ◽  
Practical Applications ◽  
Wide Range

The aim of this paper is the development of a sensor for the quantification of nickel ions in food raw materials and foods. It is believed that about 15% of the human population suffers from nickel allergy. In addition to digestive manifestations, food intolerance to nickel may also have systemic manifestations, such as diffuse dermatitis, diffuse itching, fever, rhinitis, headache, altered general condition. Therefore, it is necessary to control this content of nickel ions for the health of the human population by developing a new method that offers the advantages of a fast, not expensive, in situ, and accurate analysis. For this purpose, bismuth oxide-screen-printed electrodes (SPEs) and graphene-modified SPEs were used with a very small amount of dimethylglyoxime and amino acid L-histidine that were deposited. A potentiostat that displays the response in the form of a cyclic voltammogram was used to study the electrochemical properties of nickel standard solution with different concentrations. The results were compared and the most sensitive sensor proved to be bismuth oxide-SPEs with dimethylglyoxime (Bi2O3/C-dmgH2) with a linear response over a wide range (0.1–10 ppm) of nickel concentrations. Furthermore, the sensor shows excellent selectivity in the presence of common interfering species. The Bi2O3/C-dmgH2 sensor showed good viability for nickel analysis in food samples (cocoa, spinach, cabbage, and red wine) and demonstrated significant advancement in sensor technology for practical applications.

Morphometric Registration of Cytotoxic Changes of Epithelial Cells In Vitro: A Methodological Study

1990 ◽  
Vol 17 (3) ◽  
pp. 174-176
Author(s):  
Lis Andersen ◽  
Dorthe Arenholt-Bindslev
Keyword(s):  
Culture System ◽  
Optimal Allocation ◽  
Volume Density ◽  
Cell Culture System ◽  
Allocation Of Resources ◽  
Methodological Study ◽  
Epithelial Cell Culture ◽  
Coefficients Of Variation ◽  
And Control

Quantification of toxicity-induced cytomorphological effects in an epithelial cell culture system is described. Estimates of volume density and star volume of mitochondria and lysosomes are given. Mean volumes (n = 5) and coefficients of variation of these parameters were equal in experimental (TPA-treatment) and control cultures. An optimal allocation of resources for estimating cytomorphometric parameters would be to increase the number of culture flasks.

scholarly journals Assessment of Linearization Approaches for Multibody Dynamics Formulations

2017 ◽  
Vol 12 (4) ◽  
Author(s):  
Francisco González ◽  
Pierangelo Masarati ◽  
Javier Cuadrado ◽  
Miguel A. Naya
Keyword(s):  
Mechanical System ◽  
Multibody Dynamics ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Practical Applications ◽  
Linearization Methods ◽  
Highly Nonlinear ◽  
Wide Range ◽  
The Way

Formulating the dynamics equations of a mechanical system following a multibody dynamics approach often leads to a set of highly nonlinear differential-algebraic equations (DAEs). While this form of the equations of motion is suitable for a wide range of practical applications, in some cases it is necessary to have access to the linearized system dynamics. This is the case when stability and modal analyses are to be carried out; the definition of plant and system models for certain control algorithms and state estimators also requires a linear expression of the dynamics. A number of methods for the linearization of multibody dynamics can be found in the literature. They differ in both the approach that they follow to handle the equations of motion and the way in which they deliver their results, which in turn are determined by the selection of the generalized coordinates used to describe the mechanical system. This selection is closely related to the way in which the kinematic constraints of the system are treated. Three major approaches can be distinguished and used to categorize most of the linearization methods published so far. In this work, we demonstrate the properties of each approach in the linearization of systems in static equilibrium, illustrating them with the study of two representative examples.

Periodic wavelet descriptor of plant leaf and its application in botany

2015 ◽  
Vol 13 (06) ◽  
pp. 1550043 ◽  
Author(s):  
Qing-Mao Zeng ◽  
Tong-Lin Zhu ◽  
Xue-Ying Zhuang ◽  
Ming-Xuan Zheng
Keyword(s):  
Species Identification ◽  
Plant Species ◽  
Shape Descriptor ◽  
Plant Leaf ◽  
Practical Applications ◽  
Wide Range ◽  
Periodic Wavelet ◽  
Plant Species Identification ◽  
Botanical Research ◽  
Wavelet Descriptor

Leaf is one of the most important organs of plant. Leaf contour or outline, usually a closed curve, is a fundamental morphological feature of leaf in botanical research. In this paper, a novel shape descriptor based on periodic wavelet series and leaf contour is presented, which we name as Periodic Wavelet Descriptor (PWD). The PWD of a leaf actually expresses the leaf contour in a vector form. Consequently, the PWD of a leaf has a wide range in practical applications, such as leaf modeling, plant species identification and classification, etc. In this work, the plant species identification and the leaf contour reconstruction, as two practical applications, are discussed to elaborate how to employ the PWD of a plant leaf in botanical research.

Long-offset moveout for VTI using Padé approximation

Geophysics ◽  
2016 ◽  
Vol 81 (5) ◽  
pp. C219-C227 ◽  
Author(s):  
Hanjie Song ◽  
Yingjie Gao ◽  
Jinhai Zhang ◽  
Zhenxing Yao
Keyword(s):  
Padé Approximation ◽  
Pade Approximation ◽  
Practical Applications ◽  
Long Offset ◽  
Wide Range ◽  
Isotropic Media ◽  
Transversally Isotropic ◽  
Error Accumulation ◽  
Anisotropy Parameters ◽  
Vti Media

The approximation of normal moveout is essential for estimating the anisotropy parameters of the transversally isotropic media with vertical symmetry axis (VTI). We have approximated the long-offset moveout using the Padé approximation based on the higher order Taylor series coefficients for VTI media. For a given anellipticity parameter, we have the best accuracy when the numerator is one order higher than the denominator (i.e., [[Formula: see text]]); thus, we suggest using [4/3] and [7/6] orders for practical applications. A [7/6] Padé approximation can handle a much larger offset and stronger anellipticity parameter. We have further compared the relative traveltime errors between the Padé approximation and several approximations. Our method shows great superiority to most existing methods over a wide range of offset (normalized offset up to 2 or offset-to-depth ratio up to 4) and anellipticity parameter (0–0.5). The Padé approximation provides us with an attractive high-accuracy scheme with an error that is negligible within its convergence domain. This is important for reducing the error accumulation especially for deeper substructures.

Sign in / Sign up

Export Citation Format

Share Document