scholarly journals Development and validation of kinetic spectrophotometric method for herbicide bromfenoxim determination

2016 ◽  
Vol 14 (2) ◽  
pp. 115-123
Author(s):  
Emilija Pecev-Marinkovic ◽  
Zora Grahovac ◽  
Snezana Mitic ◽  
Aleksandra Pavlovic ◽  
Ivana Rasic-Misic ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Detection Limit ◽  
Spectrophotometric Method ◽  
Inhibitory Effect ◽  
Sulfanilic Acid ◽  
Hplc Method ◽  
Optimum Conditions ◽  
Relative Standard ◽  
Kinetic Spectrophotometric ◽  
Development And Validation

A kinetic spectrophotometric method for determining the residues of herbicide bromofenoxim (BrFX) has been developed and validated. The proposed method is based on the inhibitory effect of BrFX on the oxidation of sulfanilic acid (SA) by hydrogen peroxide in the presence of Cu(II) ion, which was monitored at 370 nm. The variables affecting the rate of the reaction were investigated and the optimum conditions were established. BrFX can be measured in the range of 0.041 - 0.46 ?g/ml and 0.46 - 13.86 ?g/ml. The detection limit of the method with 3? criteria is 0.0077 ?g/ml. The relative standard deviations for five replicate determinations of 0.041, 0.24 and 0.46 ?g/ml BrFX are 3.0, 5.32 and 2.85%, respectively. This method can be successfully used to determine BrFX concentration in baby juice samples. The HPLC method is used to verify the results. The results obtained for the same samples by the two methods are quite comparable.

scholarly journals Development of a kinetic spectrophotometric method for insecticide diflubenzuron determination in water and baby food samples

2018 ◽  
Vol 72 (5) ◽  
pp. 305-314 ◽  
Author(s):  
Emilija Pecev-Marinkovic ◽  
Zora Grahovac ◽  
Aleksandra Pavlovic ◽  
Snezana Tosic ◽  
Ivana Rasic-Misic ◽  
...  
Keyword(s):  
Spectrophotometric Method ◽  
Solid Phase ◽  
Kinetic Method ◽  
Inhibitory Effect ◽  
Food Samples ◽  
Hplc Method ◽  
Baby Food ◽  
Relative Standard ◽  
Concentration Interval ◽  
Kinetic Spectrophotometric

A kinetic spectrophotometric method for determining residues of insecticide diflubenzuron 1(4-chlorphenyl)-3-(2,6-diflubenzoyl)urea (DFB) has been developed and validated. Kinetic method was based on the inhibitory effect of DFB on the oxidation reaction of sulfanilic acid (SA) by hydrogen peroxide in the presence of Co2+ ions in a phosphate buffer, which was monitored at 370 nm. DFB can be measured in the concentration interval 0.102 ? 3.40 ?g mL-1 and 3.40 ? 23.80 ?g mL-1. The detection and quantification limits of the method were calculated according to the 3? criteria and found to be 0.077 ?g mL-1 and 0.254 ?g Ml-1, respectively. The relative standard deviations for five replicate determinations of 0.102, 1.70 and 3.40 ?g mL-1 DFB were 2.08, 1.22 and 1.21 %, respectively, for the first concentration interval, and the recovery percentage values were from 94.12 to 97.35 %. HPLC method was used as a parallel method to verify results of the kinetic method. The kinetic method was successfully applied to determine diflubenzuron concentrations in spiked water and baby food samples after solid phase extraction of the samples. The F and t values at 95% confidence level are lower than the theoretical ones, confirming agreement of the developed and the HPLC method.

scholarly journals Kinetic-Spectrophotometric Determination of Iodide Based on its Inhibitory Effect on the Decolorization Reaction of Methyl Orange

2009 ◽  
Vol 6 (4) ◽  
pp. 1267-1273
Author(s):  
Reyhaneh Rahnama Kozani ◽  
Ferydoun Ashrafi ◽  
Masuod Khalilnezhad ◽  
Mohammad Reza Jamali
Keyword(s):  
Methyl Orange ◽  
Spectrophotometric Determination ◽  
Limit Of Detection ◽  
Inhibitory Effect ◽  
Calibration Graph ◽  
Reaction Products ◽  
Optimum Conditions ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple, sensitive, rapid and reliable method has been developed for spectrophotometric determination of iodide based on its inhibition effect on the redox reaction between bromate and hydrochloric acid. The decolorization of methyl orange by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. The variables affecting the rate of the reaction were investigated. Under the optimum conditions, the limit of detection is 1.5 × 10-7mol L-1and calibration range is 2.0 × 10-6–1.3 × 10-4mol L-1of iodide. The linearity range of the calibration graph is depends on bromate concentration. The relative standard deviation of ten-replication determination of 8.2 × 10-5mol L-1iodide was 1.4%. The proposed method was applied to the determination of iodide in natural water samples with satisfactory results.

scholarly journals Development and validation of a rapid turbidimetric assay to determine the potency of norfloxacin in tablets

2015 ◽  
Vol 51 (3) ◽  
pp. 629-635 ◽  
Author(s):  
Lucas Chierentin ◽  
Hérida Regina Nunes Salgado
Keyword(s):  
Inhibitory Effect ◽  
Hplc Method ◽  
Assay Method ◽  
Test Microorganism ◽  
Fluoroquinolone Antibiotics ◽  
Relative Standard ◽  
Significant Difference ◽  
Turbidimetric Assay ◽  
Student’S T ◽  
Development And Validation

Norfloxacin is one of the first commercially available (and most widely used) fluoroquinolone antibiotics. This paper reports the development and validation of a simple, sensitive, accurate and reproducible turbidimetric assay method to quantify norfloxacin in tablets formulations in only 4 hours. The bioassay is based on the inhibitory effect of norfloxacin upon the strain ofStaphylococcus epidermidis ATCC 12228 IAL 2150 used as test microorganism. The assay was performed 3x3 parallel lines like, three tubes for each concentration of reference substance and three tubes for each sample concentration. The results were treated statistically by analysis of variance and were found to be linear (r2 = 0.9999) in the selected range of 25-100 μg mL-1; precise (intra-assay: relative standard deviation (RSD) = 1.33%; inter-assay: RSD = 0.21%), accurate (100.74%) and robust with RSD lower than 4.5%. The student's t-test showed no statistically significant difference between the proposed turbidimetric method and an HPLC method previously validated. However the turbidimetric assay can be used as a valuable alternative methodology for the routine quality control of this medicine, complementary to other physical-chemical methods.

scholarly journals A New Inhibition Kinetic Spectrophotometric Method for the Determination of Resorcinol

2010 ◽  
Vol 7 (3) ◽  
pp. 727-732
Author(s):  
Mohsen Keyvanfard
Keyword(s):  
Spectrophotometric Method ◽  
Fixed Time ◽  
Inhibitory Effect ◽  
Cresyl Violet ◽  
Relative Standard ◽  
Fast Kinetic ◽  
Kinetic Spectrophotometric ◽  
Replicate Measurements ◽  
Catalyzed Oxidation

A new, simple, inexpensive and fast kinetic spectrophotometric method was developed for the determination of trace amounts of resorcinol over the range of 0.02-0.80 μg/mL. The method is based on the inhibitory effect of resorcinol on the formaldehyde catalyzed oxidation reaction of of cresyl violet by bromate in acidic media is reported. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of cresyl violet at 596 nm with a fixed-time 0.5–2.5 min from initiation of the reaction.The detection limit is 0.017 μg/mL and relative standard deviation of 0.1 and 0.5 μg/mL resorcinol for six replicate measurements was 2.6 and 2.9 %, respectively. The method was applied to the determination of resorcinol in water samples.

scholarly journals Thionine-Bromate as a New Reaction System for Kinetic Spectrophotometric Determination of Hydrazine in Cooling Tower Water Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Masoud Reza Shishehbore ◽  
Ali Sheibani ◽  
Masoumeh Eslami
Keyword(s):  
Water Samples ◽  
Kinetic Method ◽  
Reaction System ◽  
Fixed Time ◽  
Inhibitory Effect ◽  
Optimum Conditions ◽  
Acid Media ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple, selective, and inexpensive kinetic method was developed for the determination of hydrazine based on its inhibitory effect on the thionine-bromate system in sulfuric acid media. The reaction was monitored spectrophotometrically at 601 nm by a fixed time method. The effect of different parameters such as concentration of reactants, ionic strength, temperature, and time on the rate of reaction was investigated, and the optimum conditions were obtained. Under optimum conditions, the calibration curve was linear in the concentration range from 0.8–23.0 μg mL−1of hydrazine, and the detection limit of the method was 0.22 μg mL−1. The relative standard deviation for five replicate determinations of 1.0 μg mL−1of hydrazine was 0.74%. The potential of interfering effect of foreign species on the hydrazine determination was studied. The proposed method was successfully applied for the determination of hydrazine in different water samples.

scholarly journals The Development of a New Inhibition Kinetic Spectrophotometric Method for the Determination of Phenylhydrazine Based on its Inhibitory Effect on Oxidation of Methyl Red by Bromate in Micellar Medium

2010 ◽  
Vol 7 (4) ◽  
pp. 1591-1597
Author(s):  
Mohsen Keyvanfard
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Fixed Time ◽  
Inhibitory Effect ◽  
Methyl Red ◽  
Micellar Medium ◽  
Relative Standard ◽  
Inhibition Kinetic ◽  
Kinetic Spectrophotometric

A new, simple, sensitive and selective kinetic spectrophotometric method was developed for the determination of trace amounts of phenylhydrazine over the range of 0.02-0.30 μg/mL. The method is based on the inhibitory effect of phenylhydrazine on the oxidation of methyl red by bromate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of methyl red at 518 nm with a fixed-time 0.5–2.0 min from initiation of the reaction..The relative standard deviation of 0.08 and 0.2 μg/mL phenylhydrazine was 1.7 and 2.4%, respectively. The method was applied to the determination of phenylhydrazine in water samples.

scholarly journals Development and Validation of UV Spectrophotometric Method for the Determination of Cefuroxime Axetil in Bulk and Pharmaceutical Formulation

2013 ◽  
Vol 6 (1) ◽  
pp. 133-141 ◽  
Author(s):  
S. Binte Amir ◽  
M. A. Hossain ◽  
M. A. Mazid
Keyword(s):  
Spectrophotometric Method ◽  
Cost Effective ◽  
Cefuroxime Axetil ◽  
Pharmaceutical Formulation ◽  
Uv Spectrum ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Label Claim ◽  
Development And Validation

The present study was undertaken to develop and validate a simple, sensitive, accurate, precise and reproducible UV spectrophotometric method for cefuroxime axetil using methanol as solvent. In this method the simple UV spectrum of cefuroxime axetil in methanol was obtained which exhibits absorption maxima (?max) at 278 nm. The quantitative determination of the drug was carried out at 278 nm and Beer’s law was obeyed in the range of (0.80-3.60) µg/ml. The proposed method was applied to pharmaceutical formulation and percent amount of drug estimated (95.6% and 96%) was found in good agreement with the label claim. The developed method was successfully validated with respect to linearity, specificity, accuracy and precision. The method was shown linear in the mentioned concentrations having line equation y = 0.05x + 0.048 with correlation coefficient of 0.995. The recovery values for cefuroxime axetil ranged from 99.85-100.05. The relative standard deviation of six replicates of assay was less than 2%. The percent relative standard deviations of inter-day precision ranged between 1.45-1.92% and intra-day precision of cefuroxime axetil was 0.96-1.51%. Hence, proposed method was precise, accurate and cost effective.  Keywords: UV-Vis spectrophotometer; Method validation; Cefuroxime axetil; Recovery studies.  © 2013 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.   doi: http://dx.doi.org/10.3329/jsr.v6i1.14879 J. Sci. Res. 6 (1), 133-141 (2013)  

scholarly journals The Development of a New Kinetic Spectrophotometric Method for the Determination of Vanadium(V) Based on its Catalytic Effect on the Oxidation of Malachite Green Oxalate by Bromate in Acidic and Micellar Medium

2010 ◽  
Vol 7 (4) ◽  
pp. 1612-1620 ◽  
Author(s):  
M. Keyvanfard ◽  
N. Abedi
Keyword(s):  
Malachite Green ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric ◽  
Malachite Green Oxalate

A new, simple, sensitive and selective kinetic spectrophotometric method was developed for the determination of ultra trace amounts of vanadium(V). The method is based on the catalytic effect of vanadium(V) on the oxidation of malachite green oxalate (MG) by bromate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of malachite green oxalate (MG) at 625 nm with a fixed-time method. The decrease in the absorbance of MG is proportional to the concentration of vanadium(V) in the range of 1-100 ng/mL with a fixed time of 0.5-2 min from the initiation of the reaction. The limit of detection is 0.71 ng/mL of vanadium(V). The relative standard deviation for the determination of 5, 30, 50 ng/mL of vanadium(V) was2.5% 2.6%, 2.4% and respectively. The method was applied to the determination of vanadium(V) in water samples.

scholarly journals Determination of Sodium Cromoglycate by a New Kinetic Spectrophotometric Method in Biological Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Mohsen Keyvanfard ◽  
Khadijeh Alizad ◽  
Razieh Shakeri
Keyword(s):  
Standard Deviation ◽  
Sodium Cromoglycate ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Biological Samples ◽  
Limit Of Detection ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A new kinetic spectrophotometric method is described for the determination of ultratrace amounts of sodium cromoglycate (SCG). The method based on catalytic action of SCG on the oxidation of amaranth with periodate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the amaranth at 518 nm, for the first 4 min from initiation of the reaction. Calibration curve was linear in the range of 4.0−36.0 ng mL−1SCG. The limit of detection is 2.7 ng mL−1SCG. The relative standard deviation (RSD) for ten replicate analyses of 12, 20, and 28 ng mL−1SCG was 0.40%, 0.32%, and 0.53%, respectively. The proposed method was used for the determination of SCG in biological samples.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

Sign in / Sign up

Export Citation Format

Share Document