scholarly journals In vitro release study of 2-aminobenzothiazole from microspheres as drug carriers

2020 ◽  
Vol 85 (4) ◽  
pp. 531-545 ◽  
Author(s):  
Asma Merdoud ◽  
Meryem Mouffok ◽  
Abderrezzak Mesli ◽  
Nafa Chafi ◽  
Messaoud Chaib
Keyword(s):  
Release Rate ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Process Conditions ◽  
Prolonged Release ◽  
Solvent Ratio ◽  
Cellulose Derivatives ◽  
Vitro Release ◽  
Polymer Solvent

The aim of the present study was the preparation of 2-aminobenzothiazole- loaded microspheres based on cellulose derivatives for controlled and prolonged release. Micro-encapsulation by the simple emulsion (O/W) solvent evaporation method was performed to prepare these formulations using two cellulose derivatives as matrices: ethyl cellulose (EC) and cellulose acetate butyrate (CAB). Optimization of the experimental parameters, such as the polymer/ solvent ratio, the matrix type, stirring speed and the number of blades, was performed to obtain a high encapsulation efficiency of the drug. The effect of the selected parameters on microsphere characteristics, as well as the release rate was investigated. SEM images show that the obtained microparticles were spherical in shape. The effective entrapment of 2-amino-benzothiazole (2-ABZT) in the microspheres was confirmed by FTIR spectroscopy and XRD diffraction analysis. The encapsulation efficiency was improved when the polymer concentration increased reaching 89 %. Microspheres in the size range of 61?278 ?m with EC and close to 113 ?m with CAB were obtained by varying the process conditions. The in vitro release kinetics of the cation of 2-ABZT were established at 37 ?C in simulated gastric medium pH 1.2 and the obtained data were analyzed according to the Fick law. The results showed that the surface morphology and encapsulation efficiency of the microspheres depended strongly on the polymer/solvent ratio and the release rate could be controlled by adjusting the process conditions.

Formulation and Evaluation of Sustained Release Dosage Forms of Norfloxacin

2018 ◽  
Vol 11 (6) ◽  
pp. 4331-4337
Author(s):  
C Suja ◽  
Sismy C
Keyword(s):  
Sustained Release ◽  
Guar Gum ◽  
In Vitro Release ◽  
Angle Of Repose ◽  
Prolonged Release ◽  
Weight Variation ◽  
Sustained Release Tablets ◽  
Release Study ◽  
Vitro Release

The goal of this study was to formulate and evaluate norfloxacin sustained release tablets. Norfloxacin sustained release tablets were prepared by wet granulation method using two polymers such as HPMC K 100 M (hydrophilic polymer) and guar gum (natural polymer) and with three polymer ratios (0.5, 1.0 and 1.5). The prepared granules were evaluated to preformulation studies such as angle of repose, bulk density, tapped density, bulkiness, compressibility index and Hauser’s ratio. All the parameters shows that the granules having good flow properties. Then the formulated tablets were taken to evaluation studies such as hardness, weight variation, friability, drug content and thickness. All the parameters were within the acceptable limits. IR spectral analysis showed that there was no interaction between the drug and polymers. The in vitro release study was performed in phosphate buffer pH 7.4 at 293 nm. The in vitro release study showed that if the polymer ratio is increased, then the release of the drug is prolonged. HPMC K 100M shows a prolonged release when compared to guar gum.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals pH-Responsive Liposomes of Dioleoyl Phosphatidylethanolamine and Cholesteryl Hemisuccinate for the Enhanced Anticancer Efficacy of Cisplatin

Pharmaceutics ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 129
Author(s):  
Hassan Shah ◽  
Asadullah Madni ◽  
Muhammad Muzamil Khan ◽  
Fiaz-ud-Din Ahmad ◽  
Nasrullah Jan ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Release Rate ◽  
In Vitro Release ◽  
Chemotherapeutic Agents ◽  
Ph Responsive ◽  
Scanning Calorimetry ◽  
Cholesteryl Hemisuccinate ◽  
Vitro Release

The current study aimed to develop pH-responsive cisplatin-loaded liposomes (CDDP@PLs) via the thin film hydration method. Formulations with varied ratios of dioleoyl phosphatidylethanolamine (DOPE) to cholesteryl hemisuccinate (CHEMS) were investigated to obtain the optimal particle size, zeta potential, entrapment efficiency, in vitro release profile, and stability. The particle size of the CDDP@PLs was in the range of 153.2 ± 3.08–206.4 ± 2.26 nm, zeta potential was −17.8 ± 1.26 to −24.6 ± 1.72, and PDI displayed an acceptable size distribution. Transmission electron microscopy revealed a spherical shape with ~200 nm size. Fourier transform infrared spectroscopic analysis showed the physicochemical stability of CDDP@PLs, and differential scanning calorimetry analysis showed the loss of the crystalline nature of cisplatin in liposomes. In vitro release study of CDDP@PLs at pH 7.4 depicted the lower release rate of cisplatin (less than 40%), and at a pH of 6.5, an almost 65% release rate was achieved compared to the release rate at pH 5.5 (more than 80%) showing the tumor-specific drug release. The cytotoxicity study showed the improved cytotoxicity of CDDP@PLs compared to cisplatin solution in MDA-MB-231 and SK-OV-3 cell lines, and fluorescence microscopy also showed enhanced cellular internalization. The acute toxicity study showed the safety and biocompatibility of the developed carrier system for the potential delivery of chemotherapeutic agents. These studies suggest that CDDP@PLs could be utilized as an efficient delivery system for the enhancement of therapeutic efficacy and to minimize the side effects of chemotherapy by releasing cisplatin at the tumor site.

scholarly journals Enhanced Lymphatic Delivery of Methotrexate Using W/O/W Nanoemulsion: In Vitro Characterization and Pharmacokinetic Study

Pharmaceutics ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 978 ◽  
Author(s):  
Ji-Hun Jang ◽  
Seung-Hyun Jeong ◽  
Yong-Bok Lee
Keyword(s):  
Plasma Concentration ◽  
Zeta Potential ◽  
Intravenous Administration ◽  
Half Life ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Lymphatic Delivery ◽  
Vitro Release ◽  
Lymphatic Targeting

Methotrexate, which is widely used in the treatment of cancer and immune-related diseases, has limitations in use because of its low bioavailability, short half-life, and tissue toxicity. Thus, in this study, a nano-sized water-in-oil-in-water (W/O/W) double emulsion containing methotrexate was prepared to enhance its lymphatic delivery and bioavailability. Based on the results from solubility testing and a pseudo-ternary diagram study, olive oil as the oil, Labrasol as a surfactant, and ethanol as a co-surfactant, were selected as the optimal components for the nanoemulsion. The prepared nanoemulsion was evaluated for size, zeta potential, encapsulation efficiency, pH, morphology, and in vitro release profiles. Furthermore, pharmacokinetics and lymphatic targeting efficiency were assessed after oral and intravenous administration of methotrexate-loaded nanoemulsion to rats. Mean droplet size, zeta potential, encapsulation efficiency, and pH of formulated nanoemulsion were 173.77 ± 5.76 nm, −35.63 ± 0.78 mV, 90.37 ± 0.96%, and 4.07 ± 0.03, respectively. In vitro release profile of the formulation indicated a higher dissolution and faster rate of methotrexate than that of free drug. The prepared nanoemulsion showed significant increases in maximum plasma concentration, area under the plasma concentration-time curve, half-life, oral bioavailability, and lymphatic targeting efficiency in both oral and intravenous administration. Therefore, our research proposes a methotrexate-loaded nanoemulsion as a good candidate for enhancing targeted lymphatic delivery of methotrexate.

scholarly journals Thymoquinone-Loaded Soluplus®-Solutol® HS15 Mixed Micelles: Preparation, In Vitro Characterization, and Effect on the SH-SY5Y Cell Migration

Molecules ◽  
2020 ◽  
Vol 25 (20) ◽  
pp. 4707
Author(s):  
Maria Camilla Bergonzi ◽  
Marzia Vasarri ◽  
Giulia Marroncini ◽  
Emanuela Barletta ◽  
Donatella Degl’Innocenti
Keyword(s):  
Cell Migration ◽  
Load Capacity ◽  
Drug Loading ◽  
Neuroblastoma Cell ◽  
In Vitro Release ◽  
Human Neuroblastoma Cell ◽  
Prolonged Release ◽  
Human Neuroblastoma ◽  
Vitro Release

Thymoquinone (TQ) is the main active ingredient of Nigella sativa essential oil, with remarkable anti-neoplastic activities with anti-invasive and anti-migratory abilities on a variety of cancer cell lines. However, its poor water solubility, high instability in aqueous solution and pharmacokinetic drawbacks limits its use in therapy. Soluplus® and Solutol® HS15 were employed as amphiphilic polymers for developing polymeric micelles (SSM). Chemical and physical characterization studies of micelles are reported, in terms of size, homogeneity, zeta potential, critical micelle concentration (CMC), cloud point, encapsulation efficiency (EE%), load capacity (DL), in vitro release, and stability. This study reports for the first time the anti-migratory activity of TQ and TQ loaded in SSM (TQ-SSM) in the SH-SY5Y human neuroblastoma cell line. The inhibitory effect was assessed by the wound-healing assay and compared with that of the unformulated TQ. The optimal TQ-SSM were provided with small size (56.71 ± 1.41 nm) and spherical shape at ratio of 1:4 (Soluplus:Solutol HS15), thus increasing the solubility of about 10-fold in water. The entrapment efficiency and drug loading were 92.4 ± 1.6% and 4.68 ± 0.12, respectively, and the colloidal dispersion are stable during storage for a period of 40 days. The TQ-SSM were also lyophilized to obtain a more workable product and with increased stability. In vitro release study indicated a prolonged release of TQ. In conclusion, the formulation of TQ into SSM allows a bio-enhancement of TQ anti-migration activity, suggesting that TQ-SSM is a better candidate than unformulated TQ to inhibit human SH-SY5Y neuroblastoma cell migration.

Development and Characterization of Olanzapine Loaded Poly(lactide-co-glycolide) Microspheres for Depot Injection: In vitro and In vivo Release Profiles

2019 ◽  
Vol 16 (4) ◽  
pp. 375-383 ◽  
Author(s):  
Fahad Pervaiz ◽  
Mahmood Ahmad ◽  
Lihong Li ◽  
Ghulam Murtaza
Keyword(s):  
Bulk Density ◽  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Infrared Spectrometry ◽  
Burst Release ◽  
In Vivo Release ◽  
Depot Injection ◽  
Vitro Release

Purpose: The purpose of this study was to develop a new PLGA based microsphere formulation aimed to release the olanzapine for the period of one month which will result in increased compliance. Methods: Microspheres loaded with olanzapine were prepared using oil in water emulsion and solvent evaporation technique. The microspheres were characterized by surface morphology, shape, size, bulk density, encapsulation efficiency, and Fourier transform infrared spectrometry. In vitro release studies were performed in phosphate buffer at 37°C and in vivo studies were conducted on male Sprague- Dawley rats. Results: The morphological results indicated that microspheres produced were having a smooth surface, spherical shape and the size in the range from 9.71 to 19.90 μm mean diameter. Encapsulation efficiency of olanzapine loaded microspheres was in the range of 78.53 to 96.12% and was affected by changing the ratio of lactic to glycolic acid in copolymer PLGA. The properties of PLGA and other formulation parameters had a significant impact on in vitro and in vivo release of drug from microspheres. In vitro release kinetics revealed that release of drug from microspheres is by both non-Fickian diffusion and erosion of PLGA polymer. In vivo data indicated an initial burst release and then sustained release depending on properties of PLGA, microsphere size, and bulk density. Conclusion: This study indicates that microsphere formulations developed with PLGA (75:25) and PLGA (85:15) have provided a sufficient steady release of drug for at least 30 days and can be potential candidates for 30-day depot injection drug delivery of olanzapine.

scholarly journals Encapsulation of Olive Pomace Extract in Rocket Seed Gum and Chia Seed Gum Nanoparticles: Characterization, Antioxidant Activity and Oxidative Stability

Foods ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 1735
Author(s):  
Alican Akcicek ◽  
Fatih Bozkurt ◽  
Cansu Akgül ◽  
Salih Karasu
Keyword(s):  
Encapsulation Efficiency ◽  
In Vitro Release ◽  
Olive Pomace ◽  
Pickering Emulsions ◽  
Chia Seed ◽  
Oil In Water ◽  
Wall Materials ◽  
Seed Gum ◽  
Vitro Release

The aim of this study was to determine the potential use of rocket seed and chia seed gum as wall materials, to encapsulate and to prevent degradation of olive pomace extract (OPE) in polymeric nanoparticles, and to characterize olive pomace extract-loaded rocket seed gum nanoparticles (RSGNPs) and chia seed gum nanoparticles (CSGNPs). The phenolic profile of olive pomace extract and physicochemical properties of olive pomace, rocket seed gum (RSG), and chia seed gum (CSG) were determined. The characterization of the nanoparticles was performed using particle size and zeta potential measurement, differential scanning calorimeter (DSC), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), encapsulation efficiency (EE%), in vitro release, and antioxidant activity analyses. Nanoparticles were used to form oil in water Pickering emulsions and were evaluated by oxitest. The RSGNPs and CSGNPs showed spherical shape in irregular form, had an average size 318 ± 3.11 nm and 490 ± 8.67 nm, and zeta potential values of-22.6 ± 1.23 and -29.9 ± 2.57, 25 respectively. The encapsulation efficiency of the RSGNPs and CSGNPs were found to be 67.01 ± 4.29% and 82.86 ± 4.13%, respectively. The OPE-RSGNP and OPE-CSGNP presented peaks at the 1248 cm−1 and 1350 cm−1 which represented that C-O groups and deformation of OH, respectively, shifted compared to the OPE (1252.53 cm−1 and 1394.69 cm−1). The shift in wave numbers showed interactions of a phenolic compound of OPE within the RSG and CSG, respectively. In vitro release study showed that the encapsulation of OPE in RSGNPs and CSGNPs led to a delay of the OPE released in physiological pH. The total phenolic content and antioxidant capacity of RSGNPs and CSGNPs increased when the OPE-loaded RSGNPs and CSGNPs were formed. The encapsulation of OPE in RSGNPs and CSGNPs and the IP values of the oil in water Pickering emulsions containing OPE-RSGNPs and OPE-CSGNPs were higher than OPE, proving that OPE-loaded RSGNPs and CSGNPs significantly increased oxidative stability of Pickering emulsions. These results suggest that the RSG and CSG could have the potential to be utilized as wall materials for nanoencapsulation and prevent degradation of cold-pressed olive pomace phenolic extract.

Sign in / Sign up

Export Citation Format

Share Document