scholarly journals Thermal Conductivity and Interconnectivity of Hexamethylene Diisocyanate Contained Polyurethane Grafted Multiwall Carbon Nanotube/Polyurethane Nanocomposite Film

2011 ◽  
Vol 52 (3) ◽  
pp. 564-567 ◽  
Author(s):  
Sungjin Yun ◽  
Hyungu Im ◽  
Jooheon Kim
2016 ◽  
Vol 53 (2) ◽  
pp. 215-230 ◽  
Author(s):  
JJ Espadas-Escalante ◽  
F Avilés ◽  
PI Gonzalez-Chi ◽  
AI Oliva

The thermal conductivity and fire response of multiwall carbon nanotube/polyurethane foam composites are investigated for ∼45 kg/m3 foams with multiwall carbon nanotube concentrations of 0.1, 1, and 2 wt.%. The thermal conductivity of such nanocomposites shows a modest increase with increased multiwall carbon nanotube content, which is explained by a high value of interfacial thermal resistance, as predicted by existent thermal models. A strong correlation between multiwall carbon nanotube content, foam’s cellular morphology, and fire behavior was observed. The flame propagation speed increases with the addition of 0.1 wt.% multiwall carbon nanotubes and then reduces as the multiwall carbon nanotube content increases. The mass lost after flame extinction reduces with the addition of multiwall carbon nanotubes, suggesting an increased resistance to flame attack due the multiwall carbon nanotube presence.


Author(s):  
Sajjad Porgar ◽  
Leila Vafajoo ◽  
Nader Nikkam ◽  
Gholamreza Vakili-Nezhaad

The transformer-oil based (TOB) nanofluid suspensions were prepared through adding 0.05 to 0.80 wt% multiwall carbon nanotube (MWCNTs) functionalized with a -COOH group. The sodium dodecyl sulfate was used to stabilize the suspensions. The resulting material was used as a coolant in a double pipe heat exchanger operated under co- and counter-current flow conditions. The nanofluid thermo-physical features such as the thermal conductivity, viscosity, and density were determined at various temperatures and mass fractions. Then pertinent semi-empirical relations were developed. To verify any multiwall carbon nanotube’s (MWCNT’s) and sodium dodecyl sulfate’s (SDS) interactions with the transformer-oil based (TOB) material, the Fourier-transform infrared (FTIR) analysis was performed. Moreover, the stability of the nanofluid suspension was understudied through the UV-Visible and thermogravimetric analysis (TGA) techniques. In addition, the maximum heat transfer coefficient improvement was determined to be 86.7% at a multiwall carbon nanotube (MWCNT) mass fraction of 0.8 wt%. Meanwhile, average increments of the overall heat transfer coefficient and thermal conductivity of the prepared nanofluid were revealed about 37.2% and 138%, respectively in comparison with that of the base fluid. Furthermore, the optimum thermal conductivity of 0.388 W/m.K was obtained at 45 °C and 0.8 wt% of the multiwall carbon nanotube (MWCNT). Ultimately, a sensitivity analysis emphasized that, the understudied system’s behaviors were within an accuracy limit of ±97%.


2016 ◽  
Vol 1133 ◽  
pp. 131-135
Author(s):  
Adli Zil Ikram Abdullah ◽  
Mohd Fadzli bin Abdollah ◽  
Boon Tuan Tee ◽  
Hilmi Amiruddin ◽  
Ahmad Kamal Mat Yamin ◽  
...  

The aim of this study is to investigate the thermal properties of microencapsulated phase change material (μPCM) / multiwall carbon nanotube (MWCNT) composites. Several disc samples with 30mm diameter x 5mm width of μPCM/MWCNT composites were prepared with different mass fractions of MWCNT of 2, 4, 7 and 10 wt% using a compaction method. The thermal conductivity test was performed according to ASTM standard, while the latent heat property was calculated based on the theoretical equations. It was found that the thermal conductivity increase with mass fraction of MWCNT. However, the latent heat decreases with mass fraction of MWCNT. From these results, the optimized mass fraction of MWCNT approximately 5%, could be selected due it stable-form in thermal conductivity and latent heat capacity for electric vehicles (EVs) application. Furthermore, the reducing in melting time with increasing of MWCNT is accordance with the improvement of thermal conductivity.


2015 ◽  
Vol 1743 ◽  
Author(s):  
Gregory A. Konesky

ABSTRACTCarbon Nanotubes (CNTs) exhibit exceptional properties in terms of high strength-to-weight, high electrical conductivity, and high thermal conductivity, and have been employed as a reinforcement in various composites and other materials. Their tolerance to radiation environments may be suggested by their response to energetic ion bombardment. We discuss the effects of argon ion bombardment of both thin and thick multiwall carbon nanotube films over a range of 4 to 11 keV at fluence levels up to the order of 1021 ions/cm2. While individual carbon atoms are readily displaced from a carbon nanotube by bombardment at these energies, these nanotubes also exhibit a self-healing capability. At moderate energies and fluence, if two or more carbon nanotubes are touching and an ion strikes this point, they heal together where a junction or cross-link between them is created and the nanotubes interpenetrate. Even though some of the properties of the carbon nanotubes may be degraded by ion bombardment at non-junction regions, we have demonstrated a bulk cross-linked thin film of randomly oriented multiwall carbon nanotubes with an isotropic thermal conductivity of 2150 W/m K. At higher energies and fluence, the carbon nanotubes appear to collapse and reform aligned parallel to the incoming ion bombardment trajectory, producing high aspect ratio tapered structures. These structures are, in general, fully dense, unlike the loosely packed random carbon nanotube array from which they originated. There is also a sharp transition at the base of these structures from the dense form to the loose-packed form, suggesting that these structures may inhibit further penetration of the energetic ions.


2021 ◽  
Author(s):  
Biswajit Mahanty ◽  
Sujoy Kumar Ghosh ◽  
Kuntal Maity ◽  
KRITTISH ROY ◽  
Subrata Sarkar ◽  
...  

In this work, an all-fiber pyro- and piezo-electric nanogenerator (PPNG) is designed by multiwall carbon nanotube (MWCNT) doped poly(vinylidene fluoride) (PVDF) electrospun nanofibers as the active layer and interlocked conducting...


2005 ◽  
Vol 65 (11-12) ◽  
pp. 1703-1710 ◽  
Author(s):  
Hsu-Chiang Kuan ◽  
Chen-Chi M. Ma ◽  
Wei-Ping Chang ◽  
Siu-Ming Yuen ◽  
Hsin-Ho Wu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document