The Application of Mesoporous ZSM-5 Zeolite in the ULSD Catalysts

2020 ◽  
Vol 4 (4) ◽  
pp. 1-3
Author(s):  
Liu L
Keyword(s):  
Catalytic Performance ◽  
Nitrogen Compounds ◽  
In Situ Ftir ◽  
X Ray Diffraction ◽  
N2 Adsorption ◽  
X Ray ◽  
Acidic Sites ◽  
Adsorption Desorption ◽  
Al2o3 Catalyst

The mesoporous ZSM-5 zeolite containing MoCoP/Al2O3 catalyst (C12-ZSM5) with the mixture of Al2O3 and mesoporous ZSM- 5 zeolite as carrier was synthesized. The catalytic performance of C12-ZSM5 catalyst was evaluated by the hydrodesulfurization (HDS) of different diesel feedstock. The carriers and catalysts were characterized by N2 adsorption-desorption, pyridine-FTIR, X-ray diffraction (XRD) and CO in-situ FTIR (CO-FTIR) techniques. Results showed that mesoporous ZSM-5 can improve the acidity of the catalyst and increase the number of MoCoS active phases. The C12-ZSM5 catalyst had low HDS and HDN activity, because the acidic sites of mesoporous ZSM-5 were easily occupied by nitrogen compounds. The HDS activity of C12-ZSM5 catalyst was fully exploited by using graded packing technology, the sulfur content of product oil was 5.9 ng/μL. The relative HDS activity of C12-ZSM5 catalyst is 1.47 times that of FHUDS-8 catalyst.

Comparison of TiO2/RH-MCM-41 and TiO2/TEOS-MCM-41 Hybrid Catalysts in Characteristics and Photodegradation of Tetramethylammonium

2010 ◽  
Vol 93-94 ◽  
pp. 22-26 ◽  
Author(s):  
Surachai Artkla ◽  
Won Yong Choi ◽  
Jatuporn Wittayakun
Keyword(s):  
Irradiation Time ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
N2 Adsorption ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Adsorption Desorption ◽  
Two Hybrid ◽  
Mcm 41

This work compared properties and catalytic performance of two hybrid photocatalysts, TiO2/RH-MCM-41 and TiO2/TEOS-MCM-41 prepared by loading nanoparticles of TiO2 (10 wt.%) on MCM-41 synthesized with rice husk silica and tetraethyl orthosilicate respectively. The supports and catalysts were characterized by X-ray diffraction, N2 adsorption-desorption, transmission electron microscopy and zeta potential. The photocatalytic activities of the TiO2/RH-MCM-41 and TiO2/TEOS-MCM-41 for the degradation of tetramethylammonium (TMA) in aqueous slurry were similar with a complete conversion after irradiation time of 90 min at pH 7.

scholarly journals Synthesis of Dimethyl Carbonate from CO2 and Methanol over Zr-Based Catalysts with Different Chemical Environments

Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 710
Author(s):  
Linmeng Huo ◽  
Tian Wang ◽  
Keng Xuan ◽  
Lei Li ◽  
Yanfeng Pu ◽  
...  
Keyword(s):  
Dimethyl Carbonate ◽  
Lewis Acid Site ◽  
Catalytic Performance ◽  
Lewis Base ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Good Catalytic Activity ◽  
Adsorption Desorption

The adsorption and activation of both CO2 and methanol are mainly affected by the distance of the Lewis acid site, Zr4+, and Lewis base, Zr4+/O2−, of the Zr-based catalysts. In this paper, Zr-incorporated SBA-15 (Zr-SBA-15) and Zr-grafted SBA-15 (Zr/SBA-15) catalysts were prepared with different Zr environments, and were analyzed with N2 adsorption–desorption isotherms, X-ray diffraction, UV-vis spectra, and XPS. It was proposed that Zr-SBA-15 catalyst with Si-O-Zr-OH and Zr-O-Si-OH structure exhibited non-adjacent sites between Zr4+ and Zr4+/O2−, while Zr/SBA-15 catalyst with Zr-O-Zr-OH structure showed neighboring sites between Zr4+ and Zr4+/O2−. Furthermore, the Zr/SBA-15 catalyst exhibited good catalytic activity, while no DMC was detected over the Zr-SBA-15 catalyst at the same reaction conditions. For combined in situ infrared and catalytic performance, it was indicated that the methanol and CO2 could be activated to form DMC, only when the Zr4+ and Zr4+/O2− sites existed and were adjacent to each other in the Zr-O-Zr-OH of Zr/SBA-15 catalyst.

Synthesis and catalytic performance of MCM-41 modified with tetracarboxylphthalocyanine

2013 ◽  
Vol 67 (4) ◽  
Author(s):  
Ya-Ping Zhang ◽  
Ke-Chuang Xue ◽  
Wei-Ping Zhang ◽  
Chao Song ◽  
Rong-Lan Zhang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Performance ◽  
Conversion Ratio ◽  
X Ray Diffraction ◽  
Amino Groups ◽  
N2 Adsorption ◽  
X Ray ◽  
Adsorption Desorption ◽  
Mcm 41 ◽  
Scanning Electron

AbstractA series of tetracarboxylphthalocyanines (MPc(COOH)4, M = H, Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Zn(II)) were anchored onto MCM-41 by the following procedures: functionalization of MCM-41 with (EtO)3SiCH2CH2CH2NH2 reacting with surface Si-OH, and anchoring MPc(COOH)4 onto MCM-41 with a substitution reaction between chloroformyl and amino groups. The samples were characterized by infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, N2 adsorption-desorption, and X-ray photoelectron spectroscopy. Catalytic activity of oxidation was tested using solutions of ethanethiol in petroleum ether and thiophene in octane; CoPc-CONH-MCM-41 displayed the highest conversion ratio of 90.15 % and 93.79 %, respectively.

scholarly journals Fabrication of the Hierarchical HZSM-5 Membrane with Tunable Mesoporosity for Catalytic Cracking of n-Dodecane

Catalysts ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 155 ◽  
Author(s):  
Zhenheng Diao ◽  
Lushi Cheng ◽  
Xu Hou ◽  
Di Rong ◽  
Yanli Lu ◽  
...  
Keyword(s):  
Catalytic Cracking ◽  
Inductively Coupled Plasma ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Swelling Agent ◽  
Ft Ir ◽  
Temperature Programmed ◽  
Adsorption Desorption

Hierarchical HZSM-5 membranes were prepared on the inner wall of stainless steel tubes, using amphiphilic organosilane (TPOAC) and mesitylene (TMB) as a meso-porogen and a swelling agent, respectively. The mesoporosity of the HZSM-5 membranes were tailored via formulating the TPOAC/Tetraethylorthosilicate (TPOAC/TEOS) ratio and TMB/TPOAC ratio, in synthesis gel, and the prepared membranes were systematically characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), N2 adsorption–desorption, N2 permeation, inductively coupled plasma (ICP), in situ fourier transform infrared (FT-IR), ammonia temperature-programmed desorption (NH3-TPD), etc. It was found that the increase of the TPOAC/TEOS ratio promoted a specific surface area and diffusivity of the HZSM-5 membranes, as well as decreased acidity; the increase of the TMB/TPOAC ratios led to an enlargement of the mesopore size and diffusivity of the membranes, but with constant acid properties. The catalytic performance of the prepared HZSM-5 membranes was tested using the catalytic cracking of supercritical n-dodecane (500 °C, 4 MPa) as a model reaction. The hierarchical membrane with the TPOAC/TEOS ratio of 0.1 and TMB/TPOAC ratio of 2, exhibited superior catalytic performances with the highest activity of up to 13% improvement and the lowest deactivation rate (nearly a half), compared with the microporous HZSM-5 membrane, due to the benefits of suitable acidity, together with enhanced diffusivity of n-dodecane and cracking products.

Preparation and Catalytic Performance of Ti(SO4)2/γ-Al2O3 Catalysts for Oligomerization of 1-Butene

2013 ◽  
Vol 634-638 ◽  
pp. 696-700
Author(s):  
Lin Jiu Xiao ◽  
Peng Li ◽  
Yong Gang Sheng
Keyword(s):  
Heat Treatment ◽  
Physicochemical Properties ◽  
Heat Treatment Temperature ◽  
Catalytic Performance ◽  
Treatment Temperature ◽  
Impregnation Method ◽  
X Ray Diffraction ◽  
Isothermal Adsorption ◽  
X Ray ◽  
Adsorption Desorption

A series of Ti(SO4)2/γ-Al2O3 catalysts were prepared by impregnation method and the catalytic performance of these catalysts in 1-butene oligomerization was investigated. The heat treatment temperature played great influences on the catalytic performance of these catalysts in the oligomerization. 90.1 wt.% conversion of 1-butene and 92.2 wt.% selectivity of dimers were obtained on Ti(SO4)2/γ-Al2O3(450) catalyst at 80 °C, 1.0 Mpa and LHSV=0.6 h−1. The heat treatment temperature determined the crystallinity of TiOSO4 and specific surface area of these catalysts, which affected the catalytic performance of these catalysts in 1-butene oligomerization. In addition, the physicochemical properties of these catalysts were comparatively characterized by powder X-ray diffraction (XRD), N2 isothermal adsorption-desorption techniques.

scholarly journals Effects of Chlorinated Polypropylene on the Conformation of Polypropylene in Polypropylene/Chlorinated Polypropylene/Polyaniline Composites

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jianjun Chen ◽  
Yueyue Jia ◽  
Zhiye Zhang ◽  
Xinlong Wang ◽  
Lin Yang
Keyword(s):  
Intensity Ratio ◽  
Maximum Level ◽  
In Situ Ftir ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Infrared Band ◽  
X Ray ◽  
Polyaniline Composites

We investigated the changes in the conformation and crystalline structure of polypropylene (PP) using a combination of Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) based on PP/chlorinated PP (CPP)/polyaniline (PANI) composites. The DSC heating thermograms and WAXD patterns of the PP/CPP/PANI composites showed that theβ-crystal was affected greatly by the CPP content. Characterization of the specific regularity in the infrared band variation showed that the conformational orders of the helical sequences in PP exhibited major changes that depended on the CPP content. Initially, the intensity ratio ofA840/A810increased with the CPP concentration and reached its maximum level when the CPP content was <13.22% before decreasing as the CPP content increased further. The effect of increased temperature on the conformation of PP was studied by in situ FTIR. Initially, the intensity ratio ofA999/A973decreased slowly with increasing the temperature up to 105°C before decreasing sharply with further increases in temperature and then decreasing slowly again when the temperature was higher than 128°C.

Elucidating the structure, redox properties and active entities of high-temperature thermal aged CuOx-CeO2 catalysts for CO-PROX

2021 ◽  
Author(s):  
Zhihuan Qiu ◽  
Xiaolin Guo ◽  
Jianxin Mao ◽  
Renxian Zhou
Keyword(s):  
High Temperature ◽  
Rietveld Refinement ◽  
Copper Content ◽  
Redox Properties ◽  
Coprecipitation Method ◽  
Desorption Isotherm ◽  
X Ray Diffraction ◽  
N2 Adsorption ◽  
X Ray ◽  
Adsorption Desorption

CuOx-CeO2 catalysts with different copper content are synthesized via a coprecipitation method and thermal treated at 700 oC. Various characterization techniques including X-ray diffraction (XRD) Rietveld refinement, N2 adsorption-desorption isotherm,...

The Different Morphology of Co3O4 Catalysts and Application in the Abatement of Carbon Monoxide

2021 ◽  
Vol 21 (12) ◽  
pp. 6082-6087
Author(s):  
Chih-Wei Tang ◽  
Hsiang-Yu Shih ◽  
Ruei-Ci Wu ◽  
Chih-Chia Wang ◽  
Chen-Bin Wang
Keyword(s):  
Carbon Monoxide ◽  
Catalytic Activity ◽  
Co Oxidation ◽  
Nitrogen Adsorption ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Programmed ◽  
Adsorption Desorption

The increase of harmful carbon monoxide (CO) caused by incomplete combustion can affect human health even lead to suffocation. Therefore reducing the CO discharged by vehicles or factories is urgent to improve the air quality. The spinel cobalt (II, III) oxide (Co3O4) is an active catalyst for CO abatement. In this study, we tried to fabricate dispersing Co3O4 via the dispersion-precipitation method with acetic acid, formic acid, and oxalic acid as the chelating dispersants. Then, the asprepared samples were calcined at 300 ºC for 4 h to obtain active catalysts, and assigned as Co(A), Co(F) and Co(O) respectively, the amount of the dispersants used are labeled as I (0.12 mole), II (0.03 mole) and III (0.01 mole). For comparison, another CoAP sample was prepared via alkaliinduced precipitation and calcined at 300 ºC. All samples were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), scanning electron microscope (SEM), and nitrogen adsorption/desorption system, and the catalytic activity focused on the CO oxidation. The influence of chelating dispersant on the performance of abatement of CO was pursued in this study. Apparently, the results showed that the chelating dispersant can influence the catalytic activity of CO abatement. An optimized ratio of dispersant can improve the performance, while excess dispersant lessens the surface area and catalytic performance. The series of Co(O) samples can easily donate the active oxygen since the labile Co–O bonding and indicated the preferential performance than both Co(A) and Co(F) samples. The nanorod Co(O)-II showed preferential for CO oxidation, T50 and T90 approached 96 and 127 ºC, respectively. Also, the favorable durability of Co(O)-II sample maintains 95% conversion still for 50 h at 130 ºC and does not emerge deactivation.

Biosorption of crystal violet dye using inactive biomass of the fungus Diaporthe schini

2019 ◽  
Vol 79 (4) ◽  
pp. 709-717 ◽  
Author(s):  
Patrícia Grassi ◽  
Caroline Reis ◽  
Fernanda C. Drumm ◽  
Jordana Georgin ◽  
Denise Tonato ◽  
...  
Keyword(s):  
Crystal Violet ◽  
X Ray Diffraction ◽  
N2 Adsorption ◽  
Biosorption Capacity ◽  
X Ray ◽  
Crystal Violet Dye ◽  
Endothermic Process ◽  
Desorption Isotherms ◽  
Adsorption Desorption ◽  
Scanning Electron

Abstract An inactive biomass of a new fungus recently discovered, Diaporthe schini, was evaluated for the biosorption of crystal violet (CV) in simulated textile effluents. The characterization assays were performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and N2 adsorption/desorption isotherms. The influences of pH and biosorbent dosage on the biosorption capacity were evaluated. Kinetics, equilibrium and thermodynamic studies were also carried out. Characterization techniques showed an amorphous biosorbent, with a rough surface containing irregular particles and surface area of 6.5 m2 g−1. The most adequate values of pH and biosorbent dosage were 7.5 and 0.4 g L−1, respectively. The Elovich kinetic model and the Sips equilibrium model were suitable to fit the experimental data. The biosorption capacity increased with temperature, reaching a maximum biosorption capacity of 642.3 mg g−1 at 328 K. The biosorption was a spontaneous and endothermic process. Diaporthe schini inactive biomass was an interesting biosorbent to treat colored effluents, presenting efficiency of 87% in the decolorization of a simulated dye house effluent.

scholarly journals Efficiency of TiO2 catalyst supported by modified waste fly ash during photodegradation of RR45 dye

2019 ◽  
Vol 26 (1) ◽  
pp. 292-300 ◽  
Author(s):  
Vanja Gilja ◽  
Zvonimir Katančić ◽  
Ljerka Kratofil Krehula ◽  
Vilko Mandić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Fly Ash ◽  
Gas Adsorption ◽  
Sol Gel ◽  
Efficiency Evaluation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Synthesis ◽  
Adsorption Desorption

AbstractThe waste fly ash (FA) material was subjected to chemical treatment with HCl at elevated temperature for a different time to modify its porosity. Modified FA particles with highest surface area and pore volume were further used as a support for TiO2 catalyst during FA/TiO2 nanocomposite preparation. The nanocomposite photocatalysts were obtained by in situ sol–gel synthesis of titanium dioxide in the presence of FA particles. To perform accurate characterization of modified FA and FA/TiO2 nanocomposite photocatalysts, gas adsorption-desorption analysis, X-ray diffraction, scanning electron microscopy, UV/Vis and Infrared spectroscopy were used. Efficiency evaluation of the synthesized FA/TiO2 nanocomposites was performed by following the removal of Reactive Red 45 (RR45) azo dye during photocatalytic treatment under the UV-A irradiation. Photocatalysis has been carried out up to five cycles with the same catalysts to investigate their stability and the possible reuse. The FA/TiO2 photocatalyst showed very good photocatalytic activity and stability even after the fifth cycles. The obtained results show that successfully modified waste fly ash can be used as very good TiO2 support.

Sign in / Sign up

Export Citation Format

Share Document