Pull-Out Performance of T-Stub End Plate Connected To Concrete Filled Thin-Walled Steel Tube (CFTST) using Lindapter Hollo-Bolts

2018 ◽  
Vol 15 (1) ◽  
pp. 59
Author(s):  
NAZRUL AZMI AHMAD ZAMRI ◽  
CLOTILDA PETRUS ◽  
AZMI IBRAHIM ◽  
HANIZAH AB HAMID
Keyword(s):  
Limit Load ◽  
Steel Tube ◽  
Limit States ◽  
End Plate ◽  
Pull Out ◽  
Pullout Load ◽  
Thin Walled ◽  
Stub End ◽  
Concrete Filled Steel Tubes ◽  
Ultimate Limit

The application of concrete filled steel tubes (CFSTs) as composite members has widely been used around the world and is becoming popular day by day for structural application especially in earthquake regions. This paper indicates that an experimental study was conducted to comprehend the behaviour of T-stub end plates connected to concrete filled thin-walled steel tube (CFTST) with different types of bolts and are subjected to pullout load. The bolts used are normal type bolt M20 grade 8.8 and Lindapter Hollo-bolt HB16 and HB20. A series of 10 mm thick T-stub end plates were fastened to 2 mm CFTST of 200 mm x 200 mm in cross-section. All of the specimens were subjected to monotonic pull-out load until failure. Based on test results, the Lidapter Hollo-bolts showed better performance compare to normal bolts. The highest ultimate limit load for T-stub end plate fasten with Lindapter Hollo-bolt is four times higher than with normal bolt although all end plates show similar behaviour and failure mode patterns. It can be concluded that T-stub end plate with Lindapter Hollo-bolt shows a better performance in the service limit and ultimate limit states according to the regulations in the design codes.

scholarly journals Pull-out performance of T-stub end plate connected to concrete filled thin-walled steel tube (CFTST) using lindapter hollo-bolts

2018 ◽  
Vol 15 (1) ◽  
pp. 59-74
Author(s):  
Nazrul Azmi Ahmad Zamri ◽  
Clotilda Petrus ◽  
Azmi Ibrahim ◽  
Hanizah Ab Hamid
Keyword(s):  
Limit Load ◽  
Steel Tube ◽  
Limit States ◽  
End Plate ◽  
Pull Out ◽  
Pullout Load ◽  
Thin Walled ◽  
Stub End ◽  
Concrete Filled Steel Tubes ◽  
Ultimate Limit

The application of concrete filled steel tubes (CFSTs) as composite members has widely been used around the world and is becoming popular day by day for structural application especially in earthquake regions. This paper indicates that an experimental study was conducted to comprehend the behaviour of T-stub end plates connected to concrete filled thin-walled steel tube (CFTST) with different types of bolts and are subjected to pullout load. The bolts used are normal type bolt M20 grade 8.8 and Lindapter Hollo-bolt HB16 and HB20. A series of 10 mm thick T-stub end plates were fastened to 2 mm CFTST of 200 mm x 200 mm in cross-section. All of the specimens were subjected to monotonic pull-out load until failure. Based on test results, the Lidapter Hollo-bolts showed better performance compare to normal bolts. The highest ultimate limit load for T-stub end plate fasten with Lindapter Hollo-bolt is four times higher than with normal bolt although all end plates show similar behaviour and failure mode patterns. It can be concluded that T-stub end plate with Lindapter Hollo-bolt shows a better performance in the service limit and ultimate limit states according to the regulations in the design codes.

Pull-Out Performance of T-Stub End Plate Connected To Concrete Filled Thin-Walled Steel Tube (CFTST) using Lindapter Hollo-Bolts

2018 ◽  
Vol 15 (1) ◽  
pp. 59
Author(s):  
Nazrul Azmi Ahmad Zamri ◽  
Clotilda Petrus ◽  
Azmi Ibrahim ◽  
Hanizah Ab Hamid
Keyword(s):  
Limit Load ◽  
Steel Tube ◽  
Test Results ◽  
Limit States ◽  
End Plate ◽  
Pull Out ◽  
Thin Walled ◽  
Stub End ◽  
Concrete Filled Steel Tubes ◽  
Ultimate Limit

The application of concrete filled steel tubes (CFSTs) as composite members has widely been used around the world and is becoming popular day by day for structural application especially in earthquake regions. This paper indicates that an experimental study was conducted to comprehend the behaviour of T-stub end plates connected to concrete filled thin-walled steel tube (CFTST) with different types of bolts and are subjected to pull-out load. The bolts used are normal type bolt M20 grade 8.8 and Lindapter Hollo-bolt HB16 and HB20. A series of 10 mm thick T-stub end plates were fastened to 2 mm CFTST of 200 mm x 200 mm in cross-section. All of the specimens were subjected to monotonic pull-out load until failure. Based on test results, the Lidapter Hollo-bolts showed better performance compare to normal bolts. The highest ultimate limit load for T-stub end plate fasten with Lindapter Hollo-bolt is four times higher than with normal bolt although all end plates show similar behaviour and failure mode patterns. It can be concluded that T-stub end plate with Lindapter Hollo-bolt shows a better performance in the service limit and ultimate limit states according to the regulations in the design codes.

Theoretical Study on Axial Capacity of CFRP Reinforced Self-Stressing Concrete Filled Steel Tubes

2011 ◽  
Vol 121-126 ◽  
pp. 3025-3029
Author(s):  
Hui Li ◽  
Jun Deng ◽  
Jun Hong Lin
Keyword(s):  
Theoretical Study ◽  
Steel Tube ◽  
Limit States ◽  
Steel Tubes ◽  
Concrete Core ◽  
Cfrp Sheets ◽  
Axial Capacity ◽  
Ultimate Equilibrium ◽  
Concrete Filled Steel Tubes ◽  
Cfrp Wrapping

Since the expansion of the cement during curing was constraint by the steel tube, the concrete core in the self-stressing concrete-filled steel tubes (SSCFST) is under tri-axially compression before applying load, which increases the axial capacity of the SSCFST. In addition, Carbon fiber reinforced polymer (CFRP) wrapping can avoid bucking of the steel tube, increase the axial capacity and improve the durability of SSCFST. This study presents a theoretical study on axial capacity of the SSCFST wrapped with CFRP sheets. Several basic assumptions are proposed. The ultimate equilibrium method was employed to analyze the axial capacity, of which two limit states, including steel tube bucking and CFRP sheets rupturing were considered. The analytical results from an example show that the initial self-stress improves axial capacity of the SSCFST by about 30% and the CFRP reinforcement improves axial capacity by about 15%.

scholarly journals Structural Behavior of Thin-Walled Concrete-Filled Steel Tube Used in Cable Tunnel: An Experimental and Numerical Investigation

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Hetao Hou ◽  
Su Ma ◽  
Bing Qu ◽  
Yanhong Liang ◽  
Yanjun Jin ◽  
...  
Keyword(s):  
Steel Tube ◽  
Fe Model ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Thin Walled ◽  
The Stability ◽  
Short Time ◽  
Concrete Filled Steel Tubes ◽  
Compression Resistance ◽  
Rock And Soil

One steel grid and five thin-walled concrete-filled steel tubes (CTST) used as the supports of tunnel were tested in site for investigating the mechanical behavior. The mechanical influences of thickness, node form, and concrete on CTST were gained and compared with the impacts on steel grid. It is indicated that high antideformation capacity of CTST improved the stability of surrounding rock in short time. The cementitious grouted sleeve connection exhibited superior flexibility when CTST was erected and built. Although the deformation of rock and soil in the tunnel was increasing, good compression resistance was observed by CTST with the new connection type. It was also seen that vault, tube foot, and connections were with larger absolute strain values. The finite element analysis (FEA) was carried out using ABAQUS program. The results were validated by comparison with experimental results. The FE model could be referred by similar projects.

Benefit of Ultra-High Strength Infill in Concrete-Filled Steel Tubular Columns

2021 ◽  
Vol 898 ◽  
pp. 93-99
Author(s):  
Pavla Bukovská ◽  
Marcela Karmazínová ◽  
Michal Štrba
Keyword(s):  
Limit State ◽  
High Strength ◽  
Steel Tube ◽  
Ultimate Limit State ◽  
Steel Tubes ◽  
Tubular Columns ◽  
Circular Column ◽  
Buckling Resistance ◽  
Concrete Filled Steel Tubes ◽  
Ultimate Limit

Concrete filled steel tubes (CFST) represent a composite building member suitable especially for the construction of columns of a skeleton frame. Filling the steel tube with concrete allows the use of suitable properties of both materials and their interaction. This is very beneficial in a fire exposure, where a circular column has slightly better fire resistance than a square column. In case of an assessment of columns at the ultimate limit state (ULS), a buckling resistance decides. In previous research, it was found that increasing the strength of concrete increases buckling resistance only to a certain extent. The main aim of the article is to show through a theoretical study what benefit the use of ultra-high strength concrete has for buckling resistance of CFST.

Experimental Study of Blind Bolted Joints to Concrete-Filled Thin-Walled Steel Tubular Columns under Cyclic Loading

2012 ◽  
Vol 166-169 ◽  
pp. 78-82
Author(s):  
Jing Feng Wang ◽  
Xin Yi Chen ◽  
He Tao Hou
Keyword(s):  
Failure Modes ◽  
Steel Tube ◽  
Test Results ◽  
Seismic Behaviour ◽  
Tubular Columns ◽  
End Plate ◽  
Composite Frames ◽  
Layer Composite ◽  
Thin Walled ◽  
Plate Type

This paper discusses results of experiments on blind bolted end plate joints to concrete-filled thin-walled steel tubular (CFTST) columns. Four exterior joints to CFTST columns subjected to cyclic loadings. A feature of this novel joint is the use of the blind bolts and extensions to these bolts into the concrete-filled square steel tubular column. Failure modes, moment-rotation hysteretic curves and energy consumption of the connections were analyzed. Further, the connection rigidity and ductility were also elevated by present specifications. The test results showed that the end plate type and the steel tube thickness affect the seismic behaviour of the typed blind bolted end plate joints. The proposed joint has reasonable strength, stiffness and ductility by taking reasonable end plate type, steel tube thickness and blind bolt anchorage; its ultimate connection rotation satisfies the ductility design requirements, and could be reliably and safety used in low-layer or multi-layer composite frames.

ELASTIC BUCKLING OF THIN-WALLED CIRCULAR TUBES CONTAINING AN ELASTIC INFILL

2006 ◽  
Vol 06 (04) ◽  
pp. 457-474 ◽  
Author(s):  
M. A. BRADFORD ◽  
A. ROUFEGARINEJAD ◽  
Z. VRCELJ
Keyword(s):  
Axial Compression ◽  
A Priori ◽  
Local Buckling ◽  
Steel Tube ◽  
Transcendental Equation ◽  
Buckling Mode ◽  
Buckling Stress ◽  
Elastic Tubes ◽  
Thin Walled ◽  
Energy Formulation

Circular thin-walled elastic tubes under concentric axial loading usually fail by shell buckling, and in practical design procedures the buckling load can be determined by modifying the local buckling stress to account empirically for the imperfection sensitive response that is typical in Donnell shell theory. While the local buckling stress of a hollow thin-walled tube under concentric axial compression has a solution in closed form, that of a thin-walled circular tube with an elastic infill, which restrains the local buckling mode, has received far less attention. This paper addresses the local buckling of a tubular member subjected to axial compression, and formulates an energy-based technique for determining the local buckling stress as a function of the stiffness of the elastic infill by recourse to a transcendental equation. This simple energy formulation, with one degree of buckling freedom, shows that the elastic local buckling stress increases from 1 to [Formula: see text] times that of a hollow tube as the stiffness of the elastic infill increases from zero to infinity; the latter case being typical of that of a concrete-filled steel tube. The energy formulation is then recast into a multi-degree of freedom matrix stiffness format, in which the function for the buckling mode is a Fourier representation satisfying, a priori, the necessary kinematic condition that the buckling deformation vanishes at the point where it enters the elastic medium. The solution is shown to converge rapidly, and demonstrates that the simple transcendental formulation provides a sufficiently accurate representation of the buckling problem.

Sign in / Sign up

Export Citation Format

Share Document