scholarly journals The Role of Inorganic Metal Salts in Wastewater Clarification

2008 ◽  
Vol 4 (1) ◽  
pp. 318-322 ◽  
Author(s):  
Lugard Ukiwe ◽  
I.C. Iwu ◽  
Chijioke Okere M

An investigation into the ability of four inorganic coagulants namely; alum (Al2(SO4)3.18H2O), ammonium aluminum sulphate (NH4Al(SO4)2.12H2O), ferrous sulphate (FeSO4) and ammonium ferrous sulphate (NH4)2Fe(SO4)2.6H2O) in clarifying wastewater was examined. Results obtained from conventional standard ‘jar-test’ experiments indicated that alum was the most effective coagulant since it reduced turbidity of the wastewater to 0.64 NTU at a contact time of 300 min. Ferrous sulphate was the least effective coagulant, reducing turbidity of the wastewater to 3.45 NTU only at 240 min contact time, but when the contact time of the experiment was increased from 240 to 300 min, re-coloration of the solution was observed indicating re-stabilization of suspended particles. These findings tend to support the claim that alum is a choice coagulant for wastewater clarification.   

2013 ◽  
Vol 8 (1) ◽  
pp. 318-322
Author(s):  
Lugard Ukiwe ◽  
I.C. Iwu ◽  
Chijioke Okere M

An investigation into the ability of four inorganic coagulants namely; alum (Al2(SO4)3.18H2O), ammonium aluminum sulphate (NH4Al(SO4)2.12H2O), ferrous sulphate (FeSO4) and ammonium ferrous sulphate (NH4)2Fe(SO4)2.6H2O) in clarifying wastewater was examined. Results obtained from conventional standard ‘jar-test’ experiments indicated that alum was the most effective coagulant since it reduced turbidity of the wastewater to 0.64 NTU at a contact time of 300 min. Ferrous sulphate was the least effective coagulant, reducing turbidity of the wastewater to 3.45 NTU only at 240 min contact time, but when the contact time of the experiment was increased from 240 to 300 min, re-coloration of the solution was observed indicating re-stabilization of suspended particles. These findings tend to support the claim that alum is a choice coagulant for wastewater clarification.   


2013 ◽  
Vol 12 (2) ◽  
pp. 318-322
Author(s):  
Lugard Ukiwe ◽  
I.C. Iwu ◽  
Chijioke Okere M

An investigation into the ability of four inorganic coagulants namely; alum (Al2(SO4)3.18H2O), ammonium aluminum sulphate (NH4Al(SO4)2.12H2O), ferrous sulphate (FeSO4) and ammonium ferrous sulphate (NH4)2Fe(SO4)2.6H2O) in clarifying wastewater was examined. Results obtained from conventional standard ‘jar-test’ experiments indicated that alum was the most effective coagulant since it reduced turbidity of the wastewater to 0.64 NTU at a contact time of 300 min. Ferrous sulphate was the least effective coagulant, reducing turbidity of the wastewater to 3.45 NTU only at 240 min contact time, but when the contact time of the experiment was increased from 240 to 300 min, re-coloration of the solution was observed indicating re-stabilization of suspended particles. These findings tend to support the claim that alum is a choice coagulant for wastewater clarification.   


2016 ◽  
Vol 12 (8) ◽  
pp. 318-322
Author(s):  
Lugard Ukiwe ◽  
I.C. Iwu ◽  
Chijioke Okere M

An investigation into the ability of four inorganic coagulants namely; alum (Al2(SO4)3.18H2O), ammonium aluminum sulphate (NH4Al(SO4)2.12H2O), ferrous sulphate (FeSO4) and ammonium ferrous sulphate (NH4)2Fe(SO4)2.6H2O) in clarifying wastewater was examined. Results obtained from conventional standard ‘jar-test’ experiments indicated that alum was the most effective coagulant since it reduced turbidity of the wastewater to 0.64 NTU at a contact time of 300 min. Ferrous sulphate was the least effective coagulant, reducing turbidity of the wastewater to 3.45 NTU only at 240 min contact time, but when the contact time of the experiment was increased from 240 to 300 min, re-coloration of the solution was observed indicating re-stabilization of suspended particles. These findings tend to support the claim that alum is a choice coagulant for wastewater clarification.   


Author(s):  
Tamara Kawther Hussein ◽  
Nidaa Adil Jasim

The ability of using each of the following: aluminum sulphate (Al2(SO4)3.16H2O), ferric chloride (FeCl3), and ferrous sulphate (FeSO4) as chemical coagulants was investigated for removing of reactive green 12 (RG 12) dye and chemical oxygen demand (COD) from simulated wastewater. Best pH , coagulants dosages, and initial concentrations were obtained by jar test. The maximum efficiency for removing RG-12 and COD recorded by ferric chloride were 98% and 88 %,  by alum were 95% and 88%, and by ferrous sulphate were 70% and 50%. All these results obtained at the best pH 6, dosage 100 mg/l and initial concentrations for RG-12 and COD 50 mg/l and 600 mg/l respectively. The maximum volume of sludge was for alum coagulant 14 ml/l, 12 ml/l for ferric chloride and 0.5 ml/l for ferrous sulphate. The study improved that it is possible to use each of aluminum sulphate, ferric chloride and ferrous sulphate as an economical coagulant to treat the wastewater which it is polluted with RG 12 dye and COD.


2020 ◽  
Vol 6 (3) ◽  
pp. 180-191
Author(s):  
Kavitha Chandrasekaran

Background:: In the long run, synthetic tints were found to be harmful to the chemicals. As a result natural tints have come to be used for their many intrinsic values. The main reason being, then availability of local plants as the main source of natural colorants. Their easy availability in the country being zero cost – effective and planted for other purposes are the main reasons for utilizing them as natural tints. Almost all the parts of the plants, namely stem, leaves, fruits, seeds, barks etc. are used for extracting natural colour. In addition, they are antimicrobial antifungal, insect – repellant deodorant, disinfectant having medicinal values. Methods:: Sweet Indrajao leaves were cleaned by washing with water and dried under direct sunlight and ground as fine powder. A fine strainer was used to remove the wastages. After all these processes, 1-kilogram leaves weighed 318 grams. Then, it is put in 75% ethanol 25% water and heated in a breaker which in kept over a water bath for 2 hours. After this, the contents were filtered and kept in a separate beaker. Bleached fleece draperies stained with stain extract were made to become wet and put into different stain baths which contain the required amount of stain extract and water. Acetic acid was added to it after 20 minutes. The fleece drapery was stained for about one hour at 60oC. The draperies thus stained were removed, squeezed, and put to treatment with metal salts without washing. Different metal salts were used for the treatment using 3% of any one of the chemical mordants like alum, stannous chloride, potassium dichromate, ferrous sulphate, nickel sulphate, copper sulphate and natural mordants such as myrobolan, turmeric, cow dung, Banana sap juice at 60oC for 30 minutes with MLR of 1:30. The stained draperies were washed repeatedly in all the three methods in water and dried in air. At last, the stained draperies were put to soap with soap solution at 60oC for 10 minutes. The draperies were repeatedly washed in water and dried under the sun. Results:: Sweet Indrajao leaves discharged colour easily in alcoholic water. The fleece draperies were stained with chemical and natural mordants. It was observed that the stain uptake was found to be good in post-mordanting method. Ultrasonication has clearly improved the stainability of the draperies at pH 3 and 3.5 values. The pH decreases the stain ability under both Conventional and Ultrasonic conditions. The colour strength increases with an increase in staining temperature in both cases of US and CH methods. Conclusion:: Sweet Indrajao.L has been found to have good ultrasonic potential as a stain plant. The stain uptake as well as the fastness properties of the fleece drapery were found to enhance when metal mordant was used in conjugation with ultra-sonication for the extract of Sweet Indrajao. It was also found that the enhancement of staining ability was better without mordant draperies. The dye extract showed good antibacterial activity against the three bacterial pathogens. Among the three bacterial pathogens, dye extract showed more effective against Escherichia coli pathogens and dye extract showed more effective against Aspergillus pathogens. Hence, the ultrasonic method of drapery staining may be appropriate and beneficial for society at large in future.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Viet Cao ◽  
Ghinwa Alyoussef ◽  
Nadège Gatcha-Bandjun ◽  
Willis Gwenzi ◽  
Chicgoua Noubactep

AbstractMetallic iron (Fe0) has shown outstanding performances for water decontamination and its efficiency has been improved by the presence of sand (Fe0/sand) and manganese oxide (Fe0/MnOx). In this study, a ternary Fe0/MnOx/sand system is characterized for its discoloration efficiency of methylene blue (MB) in quiescent batch studies for 7, 18, 25 and 47 days. The objective was to understand the fundamental mechanisms of water treatment in Fe0/H2O systems using MB as an operational tracer of reactivity. The premise was that, in the short term, both MnO2 and sand delay MB discoloration by avoiding the availability of free iron corrosion products (FeCPs). Results clearly demonstrate no monotonous increase in MB discoloration with increasing contact time. As a rule, the extent of MB discoloration is influenced by the diffusive transport of MB from the solution to the aggregates at the bottom of the vessels (test-tubes). The presence of MnOx and sand enabled the long-term generation of iron hydroxides for MB discoloration by adsorption and co-precipitation. Results clearly reveal the complexity of the Fe0/MnOx/sand system, while establishing that both MnOx and sand improve the efficiency of Fe0/H2O systems in the long-term. This study establishes the mechanisms of the promotion of water decontamination by amending Fe0-based systems with reactive MnOx.


2012 ◽  
Vol 207-208 ◽  
pp. 44-50 ◽  
Author(s):  
K. Moustakas ◽  
Al. Mavropoulos ◽  
E. Katsou ◽  
K.-J. Haralambous ◽  
M. Loizidou

Author(s):  
LATIF MS ◽  
ABBAS S ◽  
KORMIN F ◽  
MUSTAFA MK

The use of metal nanoparticles (MNPs) in various fields is increasing day-by-day leading to a genuine concern about the issues related to their environmental and biological safety. The major approaches for the synthesis of NPs include physical and chemical methods which are expensive and hazardous to health in addition to being toxic to the environment. This review highlights the potential of plant extracts to carry out the synthesis of MNPs with a special emphasis on the role of flavonoids in nanosynthesis. This green and clean approach have been actively utilized in recent years as an alternative to conventional hazardous approaches. It has proved as cost-effective, non-toxic, less time and labor consuming, efficient, and eco-friendly method for the synthesis of MNPs with specific biological actions. This review also focuses on the role of polyphenols, including the flavonoids as bioreductants of metal salts for the synthesis of NPs along with their biomedical applications. Various examples of the MNPs, along with their biological actions, have also been summarized.


2002 ◽  
Vol 01 (05n06) ◽  
pp. 507-513
Author(s):  
JUNHUI HE ◽  
IZUMI ICHINOSE ◽  
SHIGENORI FUJIKAWA ◽  
TOYOKI KUNITAKE

In this work, we showed that metal salts were easily deposited as aggregates (e.g., ultrathin planar microcrystals) on the surface of TiO 2- gel films in the absence of ion-exchange sites. In contrast, metal ions were efficiently incorporated into ultrathin TiO 2- gel films, when ion-exchange sites were created using Mg ( O - Et )2 as template. A variety of metal ions, including those of main group, transition, and lanthanide elements were successfully doped into TiO 2 thin films by the current approach. Probable distribution of the ion-exchange site in the film interior was discussed.


2002 ◽  
Vol 2 (3) ◽  
pp. 235-242 ◽  
Author(s):  
E. Koukouraki ◽  
E. Diamadopoulos

Chlorination batch experiments were conducted in order to estimate the concentration of THM and their formation potential in nitrified and partially nitrified secondary effluent. The role of contact time (up to 2 hours), chlorine dose (3 levels), pH and temperature on the formation of THM was evaluated. THM formation, as measured by individual concentration as well as formation potential, was high for the nitrified secondary effluent, while for the partially nitrified effluent the respective concentrations were low, due to the reaction of chlorine with ammonia to form chloramines. In general, THM concentrations progressively increased as contact time, pH and chlorine dose increased. Increase in temperature (from 15-25°C) showed a rather limited effect. In addition, coagulation tests were applied prior to chlorination of the nitrified effluent for removing organic carbon and thereby controlling the formation of THM. Alum was used as the coagulant in doses varying from 0.1 mM to 2.5 mM. As the coagulant dose increased, the removal of both DOC and absorbance at 254 nm increased, while THM formation decreased. The reduction in THM formation was more pronounced for coagulant doses higher than 1.5 mM.


Sign in / Sign up

Export Citation Format

Share Document