Measurement System for Determination of Supercapacitor Equivalent Parameters

2013 ◽  
Vol 20 (4) ◽  
pp. 581-590 ◽  
Author(s):  
Ryszard Kopka ◽  
Wiesław Tarczyński
Keyword(s):  
Measurement System ◽  
Properties Of Materials ◽  
Materials Used ◽  
Measurement Capabilities

Abstract In this paper a measurement system for determination of supercapacitor equivalent parameters is proposed. Specific properties of materials used for supercapacitor construction require some advanced tools and measurement procedures to be applied during tests. The measurement system allows to measure values of equivalent parameters by both the DC and AC method whilst keeping appropriate time criteria required by this type of devices. Furthermore, in this paper the most relevant properties and measurement capabilities of the proposed system are described as well as some exemplary values of the supercapacitor equivalent parameters measured experimentally are presented.

Development of Methodological Support for the Study of Materials’ Air Permeability

2019 ◽  
Vol 945 ◽  
pp. 938-943
Author(s):  
I.A. Sheromova ◽  
A.S. Zheleznyakov
Keyword(s):  
Air Permeability ◽  
Control Procedure ◽  
Fibrous Materials ◽  
Additional Advantage ◽  
Textile Materials ◽  
The Subject ◽  
Properties Of Materials ◽  
Materials Used ◽  
Different Levels

The object of research of the article is the methodological and technical support for the process of studying the characteristics of ergonomic properties of materials used in the manufacture of garments, and the subject – the method for the determination of textile materials’ air permeability. The aim of the work is to simplify the method for determination of fibrous materials’ air permeability and to expand the technological capabilities of its instrument base while increasing the flexibility of the control procedure. To achieve this goal, the tasks related to the analysis of existing methods and technical means, and the development of a new method for determining the air permeability of textile materials were solved. The principal difference in the developed method is the possibility to conduct studies on the air permeability of textile materials at different levels of pressure drop on both sides of the sample, and not only in accordance with the standardized requirements. An additional advantage of the method is the possibility to create an online electronic database on the properties of materials. In comparison with analogues, the proposed method for the determination of air permeability ensures the accuracy and reliability of the data obtained, as well as facilitates the testing process by automation.

scholarly journals Determination of mechanical properties of materials used for 3D printing

2020 ◽  
Vol 20 (2) ◽  
pp. 190-194
Author(s):  
Josef Sedlak ◽  
Josef Chladil ◽  
Martin Cerny ◽  
Ales Polzer ◽  
Matus Varhanik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Mechanical Properties Of Materials ◽  
Properties Of Materials ◽  
Materials Used

scholarly journals EXPERIMENTAL CHARACTERIZATION OF A PHOTO-ACOUSTIC MEASUREMENT SYSTEM

2017 ◽  
pp. 053 ◽  
Author(s):  
Slobodan Todosijević ◽  
Dejan Ćirić ◽  
Branko Radičević ◽  
Zlatan Šoškić
Keyword(s):  
Transfer Function ◽  
Measurement System ◽  
Photoacoustic Signal ◽  
Electronic System ◽  
Photoacoustic Effect ◽  
Properties Of Materials ◽  
Optical Properties Of Materials ◽  
Non Destructive

The photoacoustic effect, as a non-destructive method, has increased application in defining thermal and optical properties of materials. Since the measurement of photoacoustic signal requires use of an electronic system, knowledge of the transfer function of the measurement system is a prerequisite for its application. This paper presents two different experimental techniques for the determination of the transfer function of a PA measurement system.

Express-Method for Determination the Fibrous Materials Resistance to Bending

2019 ◽  
Vol 945 ◽  
pp. 407-411 ◽  
Author(s):  
I.A. Sheromova ◽  
G.P. Starkova ◽  
A.S. Zheleznyakov
Keyword(s):  
Universal Method ◽  
Fibrous Materials ◽  
Electronic Database ◽  
Natural Oscillations ◽  
The Subject ◽  
Properties Of Materials ◽  
Methodological Approaches ◽  
Materials Used ◽  
Express Methods

The object of research of the article is the characteristics of mechanical properties of fibrous systems under the bending deformation, and the subject is the method of determination of the resistance to bending. The aim of the work is to develop a new universal method for evaluating the resistance of fibrous materials to bending, including, among other things, the possibility of forming an electronic database on the characteristic properties of materials. To achieve this goal, a set of problems related to the analysis of existing methodological approaches and technical means, the rationale for possible solutions to the problem posed, and the development of a new patentable method for evaluating the materials’ resistance to bending, have been solved in the research. In the course of the project, a study was developed of the required characteristics for textile and leather-fur materials used for the manufacture of garments. The method is based on the use of natural oscillations frequencies of the material as an informative parameter of their resistance to bending. The method belongs to the class of express methods and provides an opportunity to create an electronic database on the properties of materials online. The approbation of the proposed solution by comparing the estimates obtained with the results of studies obtained on the basis of a standardized method (the method of the console), showed sufficient accuracy and the possibility of practical application of the developed method.

scholarly journals EFFECT OF DOSAGE OF REDISPUTABLE POWDERS AND THE TYPE OF LOW-MODULAR INCLUSIONS ON THE PROPERTIES OF FINE-AGGREGATE CONCRETE

2019 ◽  
Vol 46 (2) ◽  
pp. 167-175 ◽  
Author(s):  
A. V. Dolgova ◽  
G. V. Nesvetaev
Keyword(s):  
Fine Aggregate ◽  
Fine Grained ◽  
Deformation Properties ◽  
Low Modulus ◽  
Strength And Deformation ◽  
Properties Of Materials ◽  
Materials Used ◽  
Entrained Air ◽  
Polymer Powders

Objectives Reliability and durability of structures using materials with various properties (plaster coatings, cement glue, new concrete during repair and restoration of structures, etc.) largely depends on the adhesion of the layers and the deformation properties of the coatings. To obtain the required properties of materials used for coatings, modifiers based on polymers and low-modulus inclusions are introduced into the composition of new concretes, for example, entrained air. The aim of the work is to identify some patterns of change in the properties of concrete with the joint introduction of these modifiers.Method Experimental determination of the tensile strength in bending, compression, E-modulus, adhesion to the concrete base by standard methods.Result The influence of separate and joint introduction of dispersible polymer powders and various low-modulus inclusions into the composition of fine-grained concrete has been established.Conclusion The joint introduction to the composition of fine-grained concrete of various low-modulus inclusions and redispersible polymer powders provides a reduction in the stress level during forced deformations due to the different effects additives on the strength and deformation properties and contributes to increased adhesion to the concrete. 

Determination of cores electrification during the flow in the modified Wurster apparatus

2016 ◽  
Vol 1 (20) ◽  
pp. 5-15
Author(s):  
Wojciech Ludwig ◽  
Tadeusz Mączka
Keyword(s):  
Measurement System ◽  
Charge Accumulation ◽  
Laboratory Conditions ◽  
Pharmaceutical Materials

The purpose of this paper was presentation of the value of cores electrification during their flow in the modified Wurster apparatus, applied for dry encapsulation of pharmaceutical materials. Previous works of the authors dealt with vulnerability of the particles of different diameter, produced by SYNTAPHARM (Cellets 1000, 700 and 100) on electrification in laboratory conditions. The presented work gives the results of examination on particles electrification in real conditions of their stable circulation in a column. The measurement system, that was applied, allowed determination of electrification potential and electrification current. Those quantities, which are the measures of charge accumulation on cores were determined for several particles (Cellets 1000, 700 and 500) with the different humidity, for different mass of the bed and spouting gas velocities.

Sign in / Sign up

Export Citation Format

Share Document