Prediction of Welding-Induced Distortion of Fixed Plate Edge Using Design of Experiment Approach

2020 ◽  
Vol 27 (1) ◽  
pp. 134-142
Author(s):  
Tomasz Urbański ◽  
Andrzej Banaszek ◽  
Wojciech Jurczak

AbstractThe paper presents the results of experimental studies on distortion of the fixed plate edge due to formation of a butt joint. This is a hidden form of weld distortion present in structural nodes and identified at the ship hull pre-fabrication stages. The investigations were performed according to a design of experiment (DoE) approach in laboratory conditions resembling those encountered in the shipbuilding industry. The presented analysis includes the technological–construction parameters influencing the evaluated distortion shape. The implemented method of experimental results evaluation allows the utilisation of the approximation dependence to predict the fixed plate edge distortion in large-scale steel structures.

2009 ◽  
Vol 627 ◽  
pp. 423-449 ◽  
Author(s):  
JOEL C. ROWLAND ◽  
MARK T. STACEY ◽  
WILLIAM E. DIETRICH

Jets arising from rivers, streams and tidal flows entering still waters differ from most experimental studies of jets both in aspect ratio and in the presence of a solid bottom boundary and an upper free surface. Despite these differences, the applicability of experimental jet studies to these systems remains largely untested by either field or realistically scaled experimental studies. Here we present experimental results for a wall-bounded plane jet scaled to jets created by flow discharging into floodplain lakes. A characteristic feature of both our prototype and experimental jets is the presence of large-scale meandering turbulent structures that span the width of the jets. In our experimental jets, we observe self-similarity in the distribution of mean streamwise velocities by a distance of six channel widths downstream of the jet outlet. After a distance of nine channel widths the velocity decay and the spreading rates largely agree with prior experimental results for plane jets. The magnitudes and distributions of the cross-stream velocity and lateral shear stresses approach self-preserving conditions in the upper half of the flow, but decrease in magnitude, and deviate from self-preserving distributions with proximity to the bed. The presence of the meandering structure has little influence on the mean structure of the jet, but dominates the jet turbulence. A comparison of turbulence analysed at time scales both greater than and less than the period of the meandering structure indicates that these structures increase turbulence intensities by 3–5 times, and produce lateral shear stresses and momentum diffusivities that are one and two orders of magnitude greater, respectively, than turbulence generated by bed friction alone.


2016 ◽  
Vol 138 (7) ◽  
Author(s):  
Nicolas Blet ◽  
Vincent Platel ◽  
Vincent Ayel ◽  
Yves Bertin ◽  
Cyril Romestant

Improvement of a new design for a capillary pumped loop (CPL) ensuring high-dissipation electronics cooling in ground transportation has been carried out over recent years. Experimental studies on the hybrid loop, which share some characteristics with the standard CPL and loop heat pipe (LHP), have underlined the sizable potential of this new system, particularly with regard to its upcoming industrial applications. In order to obtain a reliable tool for sizing and design of this CPL for terrestrial applications (CPLTA), the present transient thermohydraulic modeling has been developed. Based on the nodal method, the model's originality consists of transcribing balance equations under electrical networks by analogy. The model's validation is provided by experimental results from a new CPLTA bench with three parallel evaporators. Large-scale numerical evaluation of loop behavior in a gravity field with a single evaporator shall facilitate understanding of the different couplings between loop parts. In addition, modeling of a multi-evaporator loop is introduced and compared with recent experimental results.


2018 ◽  
pp. 311
Author(s):  
J. Agustian ◽  
L. Hermida

As insoluble substrates such as tapioca can be used to make chemical compounds, saccharification of tapioca by glucoamylase immobilised on mesostructured cellular foam (MCF) silica using Box-Behnken Design of experiment was conducted to optimize this process so that the experimental results can be used to develop large-scale operations. The experiments gave dextrose equivalent (DE) values of 6.15–69.50% (w/w). Factors of pH and temperature affected the process highly. The suggested quadratic polynomial model is significant and considered acceptable (R2 = 99.78%). Justification of the model confirms its validity and adequacy where the predicted DE shows a good agreement with the experimental results. The kinetic constants (Vmax, KM) produced by the immobilised enzyme differed highly from the values yielded by free glucoamylase indicating reduction of substrate access to enzyme active sites had occurred.


2017 ◽  
Vol 107 (5) ◽  
pp. 282-286 ◽  
Author(s):  
Omar Al-Ubaydli ◽  
John A. List ◽  
Dana L. Suskind

Policymakers often consider interventions at the scale of the population, or some other large scale. One of the sources of information about the potential effects of such interventions is experimental studies conducted at a significantly smaller scale. A common occurrence is for the treatment effects detected in these small-scale studies to diminish substantially in size when applied at the larger scale that is of interest to policymakers. This paper provides an overview of the main reasons for a breakdown in scalability. Understanding the principal mechanisms represents a first step toward formulating countermeasures that promote scalability.


2015 ◽  
Vol 1 (2) ◽  
pp. 22-48 ◽  
Author(s):  
Владимир Фролов ◽  
Vladimir Frolov

In the review, the results of experimental studies of spatial structure of small-, middle-, and large-scale plasma density perturbations induced in the ionosphere by its pumping by powerful HF O-mode (ordinary) radio waves, are analyzed. It is shown that the region with induced plasma density perturbations occupied all ionosphere body from its E-region up to the topside ionosphere in the height and it has the horizontal length of about of 300–500 km. Peculiarities of generation of artificial ionosphere irregularities of different scale-lengths in the magnetic zenith region are stated. Experimental results obtained under conditions of iono-sphere periodical pumping when the generation of travel ionosphere disturbances is revealed are also discussed.


Author(s):  
Michael Mutz ◽  
Anne K. Reimers ◽  
Yolanda Demetriou

Abstract Observational and experimental studies show that leisure time sporting activity (LTSA) is associated with higher well-being. However, scholars often seem to assume that 1) LTSA fosters “general” life satisfaction, thereby ignoring effects on domain satisfaction; 2) the effect of LTSA on well-being is linear and independent of a person’s general activity level; 3) the amount of LTSA is more important than the repertoire of LTSA, i.e. the number of different activities; 4) all kinds of LTSA are equal in their effects, irrespective of spatial and organisational context conditions. Using data from the German SALLSA-Study (“Sport, Active Lifestyle and Life Satisfaction”), a large-scale CAWI-Survey (N = 1008) representing the population ≥ 14 years, the paper takes a closer look on these assumptions. Findings demonstrate that LTSA is associated with general life satisfaction and domain-specific satisfaction (concerning relationships, appearance, leisure, work and health), but that the relationship is most pronounced for leisure satisfaction. Associations of sport with life satisfaction, leisure satisfaction and subjective health are non-linear, approaching an injection point from which on additional LTSA is no longer beneficial. Moreover, findings lend support to the notion that diversity in LTSA matters, as individuals with higher variation in sports activities are more satisfied. Finally, results with regard to spatial and organizational context suggest that outdoor sports and club-organized sports have additional benefits.


2021 ◽  
Vol 149 ◽  
Author(s):  
Jincheng Wei ◽  
Shurui Guo ◽  
Enshen Long ◽  
Li Zhang ◽  
Bizhen Shu ◽  
...  

Abstract The severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) is highly contagious, and the coronavirus disease 2019 (COVID-19) pandemic caused by it has forced many countries to adopt ‘lockdown’ measures to prevent the spread of the epidemic through social isolation of citizens. Some countries proposed universal mask wearing as a protection measure of public health to strengthen national prevention efforts and to limit the wider spread of the epidemic. In order to reveal the epidemic prevention efficacy of masks, this paper systematically evaluates the experimental studies of various masks and filter materials, summarises the general characteristics of the filtration efficiency of isolation masks with particle size, and reveals the actual efficacy of masks by combining the volume distribution characteristics of human exhaled droplets with different particle sizes and the SARS-CoV-2 virus load of nasopharynx and throat swabs from patients. The existing measured data show that the filtration efficiency of all kinds of masks for large particles and extra-large droplets is close to 100%. From the perspective of filtering the total number of pathogens discharged in the environment and protecting vulnerable individuals from breathing live viruses, the mask has a higher protective effect. If considering the weighted average filtration efficiency with different particle sizes, the filtration efficiencies of the N95 mask and the ordinary mask are 99.4% and 98.5%, respectively. The mask can avoid releasing active viruses to the environment from the source of infection, thus maximising the protection of vulnerable individuals by reducing the probability of inhaling a virus. Therefore, if the whole society strictly implements the policy of publicly wearing masks, the risk of large-scale spread of the epidemic can be greatly reduced. Compared with the overall cost of social isolation, limited personal freedoms and forced suspension of economic activities, the inconvenience for citizens caused by wearing masks is perfectly acceptable.


Author(s):  
Anne Spinewine ◽  
Perrine Evrard ◽  
Carmel Hughes

Abstract Purpose Polypharmacy, medication errors and adverse drug events are frequent among nursing home residents. Errors can occur at any step of the medication use process. We aimed to review interventions aiming at optimization of any step of medication use in nursing homes. Methods We narratively reviewed quantitative as well as qualitative studies, observational and experimental studies that described interventions, their effects as well as barriers and enablers to implementation. We prioritized recent studies with relevant findings for the European setting. Results Many interventions led to improvements in medication use. However, because of outcome heterogeneity, comparison between interventions was difficult. Prescribing was the most studied aspect of medication use. At the micro-level, medication review, multidisciplinary work, and more recently, patient-centered care components dominated. At the macro-level, guidelines and legislation, mainly for specific medication classes (e.g., antipsychotics) were employed. Utilization of technology also helped improve medication administration. Several barriers and enablers were reported, at individual, organizational, and system levels. Conclusion Overall, existing interventions are effective in optimizing medication use. However there is a need for further European well-designed and large-scale evaluations of under-researched intervention components (e.g., health information technology, patient-centered approaches), specific medication classes (e.g., antithrombotic agents), and interventions targeting medication use aspects other than prescribing (e.g., monitoring). Further development and uptake of core outcome sets is required. Finally, qualitative studies on barriers and enablers for intervention implementation would enable theory-driven intervention design.


Author(s):  
Shivanand M. Teli ◽  
Channamallikarjun S. Mathpati

AbstractThe novel design of a rectangular external loop airlift reactor is at present the most used large-scale reactor for microalgae culture. It has a unique future for a large surface to volume ratio for exposure of light radiation for photosynthesis reaction. The 3D simulations have been performed in rectangular EL-ALR. The Eulerian–Eulerian approach has been used with a dispersed gas phase for different turbulent models. The performance and applicability of different turbulent model’s i.e., K-epsilon standard, K-epsilon realizable, K-omega, and Reynolds stress model are used and compared with experimental results. All drag forces and non-drag forces (turbulent dispersion, virtual mass, and lift coefficient) are included in the model. The experimental values of overall gas hold-up and average liquid circulation velocity have been compared with simulation and literature results. It is seemed to give good agreements. For the different elevations in the downcomer section, liquid axial velocity, turbulent kinetic energy, and turbulent eddy dissipation experimental have been compared with different turbulent models. The K-epsilon Realizable model gives better prediction with experimental results.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Mehdi Srifi ◽  
Ahmed Oussous ◽  
Ayoub Ait Lahcen ◽  
Salma Mouline

AbstractVarious recommender systems (RSs) have been developed over recent years, and many of them have concentrated on English content. Thus, the majority of RSs from the literature were compared on English content. However, the research investigations about RSs when using contents in other languages such as Arabic are minimal. The researchers still neglect the field of Arabic RSs. Therefore, we aim through this study to fill this research gap by leveraging the benefit of recent advances in the English RSs field. Our main goal is to investigate recent RSs in an Arabic context. For that, we firstly selected five state-of-the-art RSs devoted originally to English content, and then we empirically evaluated their performance on Arabic content. As a result of this work, we first build four publicly available large-scale Arabic datasets for recommendation purposes. Second, various text preprocessing techniques have been provided for preparing the constructed datasets. Third, our investigation derived well-argued conclusions about the usage of modern RSs in the Arabic context. The experimental results proved that these systems ensure high performance when applied to Arabic content.


Sign in / Sign up

Export Citation Format

Share Document