scholarly journals Boundary-integral model of permanent magnet of a tube segment as shape

2011 ◽  
Vol 60 (4) ◽  
pp. 413-432
Author(s):  
Krystyn Pawluk ◽  
Renata Sulima
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Permanent Magnets ◽  
Boundary Integral ◽  
General Idea ◽  
Integral Approach ◽  
Integral Model ◽  
Magnetic Flux Density ◽  
The Magnetic Field ◽  
Tube Segment

Boundary-integral model of permanent magnet of a tube segment as shape The magnetic field due to a permanent magnet of a tube-side segment as shape and of radial-oriented magnetization is considered. Such a sheet modelling a single pole of the magnet is used to express the suitable contribution to magnetic quantities. A boundary-integral approach is applied that is based on a virtual scalar quantity attributed to the magnet pole. Such an approach leads to express analytically the scalar magnetic potential and the magnetic flux density by means of the elliptic integrals. Numerical examples of the computed fields are given. The general idea of the presented approach is mainly directed towards designing the magnetic field within the air gap of electric machines with permanent magnets as an excitation source. Other technical structures with permanent magnets may be a subject of this approach as well.

scholarly journals Design of a New 1D Halbach Magnet Array with Good Sinusoidal Magnetic Field by Analyzing the Curved Surface

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2522
Author(s):  
Guangdou Liu ◽  
Shiqin Hou ◽  
Xingping Xu ◽  
Wensheng Xiao
Keyword(s):  
Magnetic Field ◽  
Magnetic Flux ◽  
Permanent Magnet ◽  
Flux Density ◽  
Permanent Magnets ◽  
Air Gap ◽  
Curved Surface ◽  
Magnetic Flux Density ◽  
Sinusoidal Magnetic Field ◽  
The Magnetic Field

In the linear and planar motors, the 1D Halbach magnet array is extensively used. The sinusoidal property of the magnetic field deteriorates by analyzing the magnetic field at a small air gap. Therefore, a new 1D Halbach magnet array is proposed, in which the permanent magnet with a curved surface is applied. Based on the superposition of principle and Fourier series, the magnetic flux density distribution is derived. The optimized curved surface is obtained and fitted by a polynomial. The sinusoidal magnetic field is verified by comparing it with the magnetic flux density of the finite element model. Through the analysis of different dimensions of the permanent magnet array, the optimization result has good applicability. The force ripple can be significantly reduced by the new magnet array. The effect on the mass and air gap is investigated compared with a conventional magnet array with rectangular permanent magnets. In conclusion, the new magnet array design has the scalability to be extended to various sizes of motor and is especially suitable for small air gap applications.

Platform Design for Characterizing Shear Force Produced by Magnetized Magnetorheological Fluid

2019 ◽  
Author(s):  
Ping-Hsun Lee ◽  
Jen-Yuan (James) Chang
Keyword(s):  
Magnetic Field ◽  
Magnetic Flux ◽  
Yield Stress ◽  
Flux Density ◽  
Shear Force ◽  
Permanent Magnets ◽  
Magnetic Flux Density ◽  
Finite Element Method Result ◽  
Mr Fluid ◽  
The Magnetic Field

Abstract In this paper we proposed a platform for measuring shear force of magnetorheological (MR) fluid by which the relationship of yield stress and magnetic flux density of specific material can be determined. The device consisted of a rotatable center tube in a frame body and the magnetic field was provided by two blocks of permanent magnets placed oppositely outside the frame body. The magnitude and direction of the magnetic field were manipulated by changing the distance of the two permanent magnets from the frame body and rotating the center tube, respectively. For determining the magnetic field of the device, we adopted an effective method by fitting the FEM (finite element method) result to the measured one and then rebuilt the absent components to approximate the magnetic field, which was hardly to be measured simultaneously as different device setup were required. With the proposed platform and analytical methods, the drawing shear force and the corresponding yield stress contributed by MR fluid could be evaluated in respect to the magnitude and direction of given magnetic flux density with acceptable accuracy for specific designing purposes without a large, complex, and expensive instrument.

scholarly journals Alternative Approach for the Calculation of Magnetic Field due to Magnet for Magnetic Field Visualization and Evaluation

2020 ◽  
Vol 15 (1) ◽  
pp. 150-160
Author(s):  
Kishor Kaphle ◽  
Gyanendra Karki ◽  
Amrit Panthi
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Field Distribution ◽  
Permanent Magnets ◽  
Magnetic Field Distribution ◽  
Geometrical Shape ◽  
Shape Transformation ◽  
Basic Principles ◽  
Alternative Approach ◽  
The Magnetic Field

 The magnetic field of different geometry of the permanent magnet is analytically calculated by using basic principles of the magnetism in very easier approach. Concept of origin shifting and geometrical shape transformation are used to formulate the formula for cuboidal, cubical and cylindrical permanent magnets. This concept can be used for the analysis of magnetic field distribution in space around for permanent magnet as well as electromagnet in a very easier approach. Handy and simplified software is made to calculate the magnetic field due to permanent magnet and electromagnet at any desired position on space. Magnetic field visualization is also done in both magnitude and direction by using MATLAB.  

Research on the Magnetic Force of a Blood Pump Driven by Large Gap External Magnetic Field

2012 ◽  
Vol 271-272 ◽  
pp. 1636-1640
Author(s):  
Xiao Yan Tang ◽  
Zhong Yun ◽  
Chuang Xiang
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Magnetic Force ◽  
Permanent Magnets ◽  
Magnetic Field Intensity ◽  
Current Theory ◽  
Calculation Model ◽  
Blood Pump ◽  
Single Turn ◽  
The Magnetic Field

The calculation model of the single turn rectangle current carrying coil was established. The theoretic formula for calculating the magnetic field intensity of any point in space was derived. For a pair of radial magnetizing permanent magnets, the formula for calculating the magnetic force of permanent magnet in the magnetic field was deduced based on the equivalent current theory of permanent magnet. According to the formula, the influencing factors and the changing rules for the magnetic force of permanent magnet can be seen directly: the current, the coil turns are proportional to its magnetic force, while the coupling distance is inversely proportional to its magnetic force.

Analytical calculation of magnetic field in surface-mounted permanent-magnet machines with air-gap eccentricity

2019 ◽  
Vol 38 (2) ◽  
pp. 893-914
Author(s):  
Jawad Faiz ◽  
Mohammadreza Hassanzadeh ◽  
Arash Kiyoumarsi
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Field Distribution ◽  
Analytical Calculation ◽  
Air Gap ◽  
Magnetic Field Distribution ◽  
Magnetic Flux Density ◽  
Content Type ◽  
Air Gap Magnetic Field ◽  
The Magnetic Field

Purpose This paper aims to present an analytical method, which combines the complex permeance (CP) and the superposition concept, to predict the air-gap magnetic field distribution in surface-mounted permanent-magnet (SMPM) machines with eccentric air-gap. Design/methodology/approach The superposition concept is used twice; first, to predict the magnetic field distribution in slot-less machine with eccentric air-gap, the machine is divided into a number of sections. Then, for each section, an equivalent air-gap length is determined, and the magnetic field distribution is predicted as a concentric machine model. The air-gap field in the slot-less machine with eccentricity can be combined from these concentric models. Second, the superposition concept is used to find the CP under eccentricity fault. At this end, the original machine is divided into a number of sections which may be different from the one for slot-less magnetic field prediction, and for each section, the CP is obtained by equivalent air-gap length of that section. Finally, the air-gap magnetic field distribution is predicted by multiplying the slot-less magnetic field distribution and the obtained CP. Findings The radial and tangential components of the air-gap magnetic flux density are obtained using the proposed method analytically. The finite element analysis is used to validate the proposed method results, showing good agreements with the analytical results. Originality/value This paper addresses the eccentricity fault impact upon the air-gap magnetic field distribution of SMPM machines. This is done by a combined analysis of the complex permeance (CP) method and the superposition concept. This contrasts to previous studies which have instead focused on the subdomain method.

Driving System Design of Lifting Permanent Magnet

2013 ◽  
Vol 765-767 ◽  
pp. 125-128 ◽  
Author(s):  
Ning Ding ◽  
Ding Tong Zhang ◽  
Yu Mei Song ◽  
Jian Shi ◽  
Li Gong Ding
Keyword(s):  
Magnetic Field ◽  
System Design ◽  
Permanent Magnet ◽  
Permanent Magnets ◽  
Superposition Principle ◽  
Drive System ◽  
Driving System ◽  
The Magnetic Field

Based on our proposed superposition principle of the magnetic field, the drive system of parallel moving type and rotation moving type lifting permanent magnet were designed. Industry prototypes were manufactured, respectively, and they verify that the designed lifting permanent magnets are feasible.

scholarly journals A Novel Augmented Railgun Using Permanent Magnets

2019 ◽  
Vol 8 (1) ◽  
pp. 99-105
Author(s):  
M. B. Heydari ◽  
M. Asgari ◽  
L. Gharib ◽  
A. Keshtkar ◽  
N. Jafari ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Lorentz Force ◽  
Permanent Magnets ◽  
Pulse Current ◽  
Current Source ◽  
The Finite Element Method ◽  
Current Densities ◽  
Constant External Magnetic Field ◽  
The Magnetic Field

A novel augmented railgun using a permanent magnet is proposed in this paper. The effects of the permanent magnet on the magnetic field and distribution of current density have been investigated. High current densities in the railguns can lead to high local temperature and erosion of the rails. Therefore, the current densities in the rails and armature should be decreased without the reduction of the Lorentz force which is required for acceleration. For this purpose, augmentation of the magnetic field can be used as an effective method. The Finite Element Method (FEM) simulations have been applied in this article to analyze the performance of the railgun in the presence of the magnets. Two augmented railgun structures have been introduced to produce a constant external magnetic field. For both structures, augmented railgun characteristics are studied in comparison to the railgun without the augmentation. The results show that augmentation with permanent magnet increases railgun efficiency, especially in low current railguns. For pulse current source I=30kA, Lorentz force of the augmented railgun with four magnets is 2.02 times greater than the conventional railgun.

External Magnetic Field Control during EDM of a Permanent Magnet

2014 ◽  
Vol 1017 ◽  
pp. 806-811
Author(s):  
Hideki Takezawa ◽  
Nobuhiro Yokote ◽  
Naotake Mohri
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Magnetic Flux ◽  
Permanent Magnet ◽  
Flux Density ◽  
Electrical Discharge Machining ◽  
Magnetic Flux Density ◽  
Internal Temperature ◽  
Set Up ◽  
The Magnetic Field

The effect of changes in the magnetic field on the magnetic flux density during the electrical discharge machining (EDM) of a permanent magnet is reported. During EDM of the permanent magnet, a second magnet for the external magnetic field was set up, and the internal temperature and surface magnetic flux density on the opposite surface of the permanent magnet during machining were evaluated. It was found that even though the internal temperature of the magnet remained unchanged, the surface magnetic flux density changed when the external magnetic field was varied. In addition, the magnetic field generated by the magnet changed when a plate with high permeability was pressed onto the surface of the permanent magnet.

Study on Magnetic Field for Navigation of Articulated Needle

2012 ◽  
Vol 152-154 ◽  
pp. 952-957
Author(s):  
Hua Fang Huang ◽  
Yi Zhong Wang ◽  
Zong Guo Zhou ◽  
Yong Hua Chen
Keyword(s):  
Magnetic Field ◽  
Magnetic Flux ◽  
Flux Density ◽  
Permanent Magnets ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Magnetic Flux Density ◽  
Variable Direction ◽  
The Magnetic Field ◽  
Three Dimensional Space

When the magnetic articulated needle is inserting, the magnetic field which can produce the magnetic force of variable direction is required in order to implement the magnetic navigation in three-dimensional space. The paper puts forward a method for generating three-dimensional magnetic field based on the rotaion and translation of multiple permanent magnets. In this method, multiple permanent magnets form a circumference array. Every permanent magnet can rotate around the spin axis of itself in the array plane and move along the direction vertical to the array plane. Thus, in the array center, a magnetic fied which can produce the uniform magnetic flux density is obtained. The direction of magnetic fied is controllable in three-dimensional space and the magnitude of magnetic flux density is variable in a certain range. The simulations by ANSYS verify the feasibility of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document