scholarly journals DESIGN FOR ADDITIVE MANUFACTURING: IS IT AN EFFECTIVE ALTERNATIVE? PART 2 – COST EVALUATION

2021 ◽  
Author(s):  
FRANCO CONCLI ◽  
MARGHERITA MOLINARO ◽  
ELEONORA RAMPAZZO
Keyword(s):  
Additive Manufacturing ◽  
Cost Evaluation ◽  
Effective Alternative ◽  
Design For Additive Manufacturing

Design for additive manufacturing: a comprehensive review of the tendencies and limitations of methodologies

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Luis Lisandro Lopez Taborda ◽  
Heriberto Maury ◽  
Jovanny Pacheco
Keyword(s):  
Additive Manufacturing ◽  
Design Methodology ◽  
Functional Performance ◽  
Cost Evaluation ◽  
Product Management ◽  
Design For Additive Manufacturing ◽  
Content Type ◽  
Starting Point ◽  
The Subject ◽  
Future Work

Purpose There are many investigations in design methodologies, but there are also divergences and convergences as there are so many points of view. This study aims to evaluate to corroborate and deepen other researchers’ findings, dissipate divergences and provide directing to future work on the subject from a methodological and convergent perspective. Design/methodology/approach This study analyzes the previous reviews (about 15 reviews) and based on the consensus and the classifications provided by these authors, a significant sample of research is analyzed in the design for additive manufacturing (DFAM) theme (approximately 80 articles until June of 2017 and approximately 280–300 articles until February of 2019) through descriptive statistics, to corroborate and deepen the findings of other researchers. Findings Throughout this work, this paper found statistics indicating that the main areas studied are: multiple objective optimizations, execution of the design, general DFAM and DFAM for functional performance. Among the main conclusions: there is a lack of innovation in the products developed with the methodologies, there is a lack of exhaustivity in the methodologies, there are few efforts to include environmental aspects in the methodologies, many of the methods include economic and cost evaluation, but are not very explicit and broad (sustainability evaluation), it is necessary to consider a greater variety of functions, among other conclusions Originality/value The novelty in this study is the methodology. It is very objective, comprehensive and quantitative. The starting point is not the case studies nor the qualitative criteria, but the figures and quantities of methodologies. The main contribution of this review article is to guide future work on the subject from a methodological and convergent perspective and this article provides a broad database with articles containing information on many issues to make decisions: design methodology; optimization; processes, selection of parts and materials; cost and product management; mechanical, electrical and thermal properties; health and environmental impact, etc.

scholarly journals GEOMETRICAL BENCHMARKING OF LASER POWDER BED FUSION SYSTEMS BASED ON DESIGNER NEEDS

2021 ◽  
Vol 1 ◽  
pp. 1657-1666
Author(s):  
Joaquin Montero ◽  
Sebastian Weber ◽  
Christoph Petroll ◽  
Stefan Brenner ◽  
Matthias Bleckmann ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Use Case ◽  
Powder Bed Fusion ◽  
Design For Additive Manufacturing ◽  
Laser Powder Bed Fusion ◽  
Measuring Systems ◽  
Powder Bed ◽  
Geometric Dimensioning And Tolerancing ◽  
Uncertainty Map ◽  
New System

AbstractCommercially available metal Laser Powder Bed Fusion (L-PBF) systems are steadily evolving. Thus, design limitations narrow and the diversity of achievable geometries widens. This progress leads researchers to create innovative benchmarks to understand the new system capabilities. Thereby, designers can update their knowledge base in design for additive manufacturing (DfAM). To date, there are plenty of geometrical benchmarks that seek to develop generic test artefacts. Still, they are often complex to measure, and the information they deliver may not be relevant to some designers. This article proposes a geometrical benchmarking approach for metal L-PBF systems based on the designer needs. Furthermore, Geometric Dimensioning and Tolerancing (GD&T) characteristics enhance the approach. A practical use-case is presented, consisting of developing, manufacturing, and measuring a meaningful and straightforward geometric test artefact. Moreover, optical measuring systems are used to create a tailored uncertainty map for benchmarking two different L-PBF systems.

scholarly journals REVIEW OF DESIGN HEURISTICS AND DESIGN PRINCIPLES IN DESIGN FOR ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 2571-2580
Author(s):  
Filip Valjak ◽  
Angelica Lindwall
Keyword(s):  
Additive Manufacturing ◽  
Design Process ◽  
Research Question ◽  
Design Principles ◽  
Current Status ◽  
Design For Additive Manufacturing ◽  
Design Heuristics ◽  
Similarities And Differences ◽  
Definition Of ◽  
Support Methods

AbstractThe advent of additive manufacturing (AM) in recent years have had a significant impact on the design process. Because of new manufacturing technology, a new area of research emerged – Design for Additive Manufacturing (DfAM) with newly developed design support methods and tools. This paper looks into the current status of the field regarding the conceptual design of AM products, with the focus on how literature sources treat design heuristics and design principles in the context of DfAM. To answer the research question, a systematic literature review was conducted. The results are analysed, compared and discussed on three main points: the definition of the design heuristics and the design principles, level of support they provide, as well as where and how they are used inside the design process. The paper highlights the similarities and differences between design heuristics and design principles in the context of DfAM.

scholarly journals Smooth Design of 3D Self-Supporting Topologies Using Additive Manufacturing Filter and SEMDOT

2020 ◽  
Vol 11 (1) ◽  
pp. 238
Author(s):  
Yun-Fei Fu ◽  
Kazem Ghabraie ◽  
Bernard Rolfe ◽  
Yanan Wang ◽  
Louis N. S. Chiu
Keyword(s):  
Additive Manufacturing ◽  
Compliant Mechanism ◽  
Optimization Method ◽  
Light Weight ◽  
Design For Additive Manufacturing ◽  
Compliance Minimization ◽  
Performance Requirements ◽  
Specific Performance ◽  
Smooth Design ◽  
Compliant Mechanism Design

The smooth design of self-supporting topologies has attracted great attention in the design for additive manufacturing (DfAM) field as it cannot only enhance the manufacturability of optimized designs but can obtain light-weight designs that satisfy specific performance requirements. This paper integrates Langelaar’s AM filter into the Smooth-Edged Material Distribution for Optimizing Topology (SEMDOT) algorithm—a new element-based topology optimization method capable of forming smooth boundaries—to obtain print-ready designs without introducing post-processing methods for smoothing boundaries before fabrication and adding extra support structures during fabrication. The effects of different build orientations and critical overhang angles on self-supporting topologies are demonstrated by solving several compliance minimization (stiffness maximization) problems. In addition, a typical compliant mechanism design problem—the force inverter design—is solved to further demonstrate the effectiveness of the combination between SEMDOT and Langelaar’s AM filter.

scholarly journals An Optimization Workflow in Design for Additive Manufacturing

2021 ◽  
Vol 11 (6) ◽  
pp. 2572
Author(s):  
Stefano Rosso ◽  
Federico Uriati ◽  
Luca Grigolato ◽  
Roberto Meneghello ◽  
Gianmaria Concheri ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Structural Optimization ◽  
Geometric Model ◽  
Complex Geometries ◽  
Design Phase ◽  
Design For Additive Manufacturing ◽  
Engineering Software ◽  
Embodiment Design ◽  
Pros And Cons

Additive Manufacturing (AM) brought a revolution in parts design and production. It enables the possibility to obtain objects with complex geometries and to exploit structural optimization algorithms. Nevertheless, AM is far from being a mature technology and advances are still needed from different perspectives. Among these, the literature highlights the need of improving the frameworks that describe the design process and taking full advantage of the possibilities offered by AM. This work aims to propose a workflow for AM guiding the designer during the embodiment design phase, from the engineering requirements to the production of the final part. The main aspects are the optimization of the dimensions and the topology of the parts, to take into consideration functional and manufacturing requirements, and to validate the geometric model by computer-aided engineering software. Moreover, a case study dealing with the redesign of a piston rod is presented, in which the proposed workflow is adopted. Results show the effectiveness of the workflow when applied to cases in which structural optimization could bring an advantage in the design of a part and the pros and cons of the choices made during the design phases were highlighted.

Study on using generative and topology design for feature enrichment in Mars Rovers

2021 ◽  
pp. 87-93
Author(s):  
Abhijith Ram C ◽  
D Ajith
Keyword(s):  
Additive Manufacturing ◽  
Solar System ◽  
Weight Reduction ◽  
Topology Design ◽  
Space Travel ◽  
Design For Additive Manufacturing ◽  
And Topology ◽  
Flexibility Design ◽  
The Origin Of Life ◽  
The Universe

Space travel has always been a crucial task. Exploration and experimenting on Planets in our solar system will help us understand the universe better and also, we could find the origin of life. Rovers play an important role in finding these answers. The problem we have at present is not only with technology to explore the universe but also the ability of our rockets to carry rovers to other rocks. Since a large amount of fuel is required for Space travel, we end with very little cargo that can be sent to explore. As additive manufacturing started to play a vital part in Mechanical Science, we are going to try to use that tool to build a Generative design that helps in parts consolidation, weight reduction, increase flexibility, design optimisation and cost consolidation. Since weight is an important aspect, we could reduce the present rover weight and add additional scientific tools to the rover to increase its scope of search and applications. This project focuses on features enrichment in Rovers by optimizing rover weight and design using Design for Additive Manufacturing concept.

Sign in / Sign up

Export Citation Format

Share Document