scholarly journals Formulation and in vitro Evaluation of Piroxicam Emulgel

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
Y Bindu Vani ◽  
C. Surya Prakash Reddy
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Evaluation Studies ◽  
Tween 80 ◽  
Zero Order ◽  
In Vitro Drug Release ◽  
Zero Order Kinetics ◽  
Release Studies ◽  
Span 80

The present work is concerned with the formulation and evaluation of Piroxicam emulgel employing carbopol 934 and xanthan gum as polymers. The emulgel is prepared by combining the gel and emulsion. The gel in formulations were prepared by dispersing Carbopol 934 and xanthan gum separately in purified water with constant stirring at a moderate speed and then the pH was adjusted to 4 to 5.4 using Tri-ethanol amine (TEA). The oil phase in the emulsion consists of oleic acid and span-80. The aqueous phase in the emulsion was prepared using Tween-80, propylene glycol and distilled water. The prepared emulgel formulations were subjected to evaluation studies like Physical appearance, rheological studies, estimation of drug content and in-vitro drug release. The appearance of prepared emulgel was white. The pH of the emulgel was found to be 5.4. The in vitro drug release studies revealed that formulation F1 showed 85.20% and formulation F2 showed 79.23% of drug release at the end of 8 hrs. The drug release of F1 formulation follows zero order kinetics.

scholarly journals FORMULATION AND EVALUATION OF IBUPROFEN GASTRO-RETENTIVE FLOATING TABLETS

2018 ◽  
Author(s):  
Saddam C Shaikh ◽  
Dnyaneshwar Sanap ◽  
Dipak V Bhusari ◽  
Shirish Jain ◽  
Pooja P Kochar ◽  
...  
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Trial And Error ◽  
In Vitro Drug Release ◽  
Floating Tablets ◽  
Weight Variation ◽  
Release Studies ◽  
Floating Systems ◽  
Gastro Retentive

The objective of the present study was to formulate the gastro-retentive floating tablets containing Ibuprofen, which would remain in stomach and/or upper part of GIT for prolonged period of time. Floating systems have low bulk density so that they can float on the gastric juice in the stomach. Ibuprofen is an anti inflammatory drug.  On trial and error basis formulation design was done. Four different batches of floating tablets of Ibuprofen were prepared using HPMC, Xanthan gum, and gas generating agent sodium bicarbonate and citric acid. The tablets were characterized for the pre and post compression parameters such as friability, hardness, thickness, drug content, weight variation, in-vitro buoyancy studies and 13 hrs in-vitro drug release studies and the results were within the limits. From the results obtained, it was concluded that the optimized formulation F4 desired drug release properties and floating behavior.

scholarly journals Formulation and Evaluation of Mupirocin Nimosomal Gel for Topical Drug Delivery System

2020 ◽  
Vol 13 (2) ◽  
pp. 7-17
Author(s):  
Rajesh Akki ◽  
Munagala Gayatri Ramya ◽  
K Navyasri ◽  
Singaram Kathirvel
Keyword(s):  
Drug Release ◽  
Evaluation Studies ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Drug Uptake ◽  
Ph Gradient ◽  
Release Studies ◽  
Uptake Process ◽  
Span 80 ◽  
Niosomal Gel

The present study was to formulate and evaluate the mupirocin niosomal gel using surfactants span 80 & tween 80 for the preparation of niosomes. Mupirocin entrapped niosomes were prepared by ether injection method and transmembrane pH gradient drug uptake process. Niosomes were prepared by altering the ratios between various non-ionic surfactants (span 80 & tween 80) whereas the concentration of cholesterol and drug was kept constant. The prepared niosomes were characterized for size, shape, entrapment efficiency, invitro drug release studies. The highest entrapment efficiency(99.17%) and drug release (96.14%) was obtained for tween 80 (1:5:5) prepared by transmembrane pH gradient method. The best formulation among the two techniques was selected for incorporated into gel formulation. The prepared niosomal gel and plain gel were subjected to evaluation studies like drug content, invitro drug diffusion studies. The studies were demonstrated that niosomal gel was shown beter pharmacological activity than the conventional mupirocin gel. Based on the results it was concluded that niosomal preparations offers more advantageous than the conventional preparations.

Synthesis, Characterization and in-vitro drug release studies of a macromolecular prodrug of Didanosine.

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
Neeraj Agrawal ◽  
M.J. Chandrasekar ◽  
U.V. Sara ◽  
Rohini A.
Keyword(s):  
Drug Release ◽  
Drug Level ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Alkaline Environment ◽  
Stomach Acid ◽  
Release Studies ◽  
Macromolecular Prodrug

A macromolecular prodrug of didanosine (ddI) for oral administration was synthesized and evaluated for in-vitro drug release profile. Didanosine was first coupled to 2-hydroxy ethyl methacrylate (HEMA) through a succinic spacer to form HEMA-Suc-ddI monomeric conjugate which was subsequently polymerized to yield Poly(HEMA-Suc-ddI) conjugate. The structures of the synthesized compounds were characterized by FT-IR, Mass and 1H-NMR spectroscopy. The prodrug was subjected for in-vitro drug release studies in buffers of pH 1.2 and 7.4 mimicking the upper and lower GIT. The results showed that the drug release from the polymeric backbone takes place in a sustained manner over a period of 24 h and the amount of drug released was comparatively higher at pH 7.4 indicating that the drug release takes place predominantly at the alkaline environment of the lower GIT rather than at the acidic environment of the upper GIT. This pH dependent sustained drug release behavior of the prodrug may be capable of reducing the dose limiting toxicities by maintaining the plasma drug level within the therapeutic range and increasing t1/2 of ddI. Moreover, the bioavailability of the drug should be improved as the prodrug releases ddI predominantly in the alkaline environment which will reduce the degradation of ddI in the stomach acid.

Development and Evaluation of Controlled Release Mucoadhesive Tablets of Captopril

1970 ◽  
Vol 9 (3) ◽  
pp. 3318-3329
Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

Fabrication and Release Kinetics of Liposomes Containing Leuprolide Acetate

2021 ◽  
Vol 7 (1) ◽  
pp. 35-38
Author(s):  
Sudipta Das ◽  
Arnab Samanta ◽  
Koushik Bankura ◽  
Debatri Roy ◽  
Amit Nayak
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Zero Order ◽  
Leuprolide Acetate ◽  
Lipid Film ◽  
In Vitro Drug Release ◽  
Liposomal Formulations ◽  
Kinetics Of

The present work is focused on the preparation and in vitro release kinetics of liposomal formulation of Leuprolide Acetate. In this work, “Thin Lipid Film Hydration Method” was used for preparation of Leuprolide Acetate loaded liposomes. Prepared liposomal formulations of Leuprolide acetate was evaluated by drug entrapment study, in-vitro drug release kinetics and stability studies. The percentage drug entrapment of Leuprolide acetate for F1 and F2 formulations were found to be 78.14 ± 0.67 and 66.70 ± 0.81% respectively. In-vitro drug release study of liposomal formulations had shown zero order release pattern. Regression co-efficient (R2) value of Zero order kinetics for F1 and F2 formulations were 0.9912 and 0.9676 respectively. After storing formulations for 1 month, stability testing was done at 40C.It was found that all batches were stable. These liposomal formulations of Leuprolide acetate can be formulated for parenteral application to treat prostate cancer and in women, to treat symptoms of endometriosis (overgrowth of uterine lining outside of the uterus) or uterine fibroids.

scholarly journals DESIGN AND IN VITRO EVALUATION OF EXTENDED RELEASE TABLET OF NATEGLINIDE

2018 ◽  
Vol 8 (5-s) ◽  
pp. 235-239
Author(s):  
NILESH M MAHAJAN ◽  
Kalyanee Wanaskar ◽  
Yogesh Bhutada ◽  
Raju Thenge ◽  
Vaibhav Adhao
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
In Vitro Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Tablet Properties ◽  
Vitro Release

The aim of present study is to formulate and evaluate extended release matrix tablet of Nateglinide by direct compression method using different polymer like HPMC K4 and HPMC K15. Matrix tablet of nateglidine were prepared in combination with the polymer HPMC K4, HPMC K15, along with the excipients and the formulations were evaluated for tablet properties and in vitro drug release studies. Nateglinide matrix tablet prepared by using polymer such as HPMC K4 and HPMC K15,  it was found that HPMC K15 having higher viscosity as compare to HPMC K4 therefore different concentration of polymer were studied to extend the drug release up to 12 h. The tablets of Nateglinide prepared by direct compression had acceptable physical characteristics and satisfactory drug release. The study demonstrated that as far as the formulations were concerned, the selected polymers proved to have an acceptable flexibility in terms of in-vitro release profile. In present the study the percent drug release for optimize batch was found to 94.62%.  Hence it can be conclude that Nateglinide extended release matrix tablet can prepared by using HPMC. The swollen tablet also maintains its physical integrity during the drug release study Keywords: Tablet, in-vitro drug release, Nateglinide, HPMC

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

Sign in / Sign up

Export Citation Format

Share Document