scholarly journals Insitu Nasal Gel of Granisetron For Enhancement of Bioavailability Over Oral Delivery: Formulation, Optimization and In-Vivo Evaluation

2020 ◽  
pp. 544-553
Author(s):  
Rahul Padalkar ◽  
ASHWINI MADGULKAR
Keyword(s):  
Drug Release ◽  
Fulvic Acid ◽  
Nasal Mucosa ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Penetration Enhancer ◽  
Histological Evaluation ◽  
In Vivo Evaluation ◽  
Formulation Optimization

The objective of the present work was formulation, optimization and in-vivo evaluation of in-situ nasal gel of granisetron that shows liquid to gel transformation at nasal temperature (32-34°C) and maximum drug release after 4 hr; shows biovailability enhancement over oral delivery. Formulations were prepared using poloxamer PF 127 as gel forming polymer, carbopol as mucoadhesive agent and fulvic acid as penetration enhancer. A Box Benhken Design was used to prepare the experimental batches and Design Expert software for optimization of the formulation. Ex-vivo evaluations were carried out on sheep nasal mucosa and for in-vivo evaluation, rabbits were used. It was observed that optimized formulation showed gelation temperature near 33°C and drug release of 96% after 4hr. Fulvic acid was evaluated as penetration enhancer in this work and showed significant enhancement of drug diffusion across nasal mucosal membrane. Ex-vivo histological evaluation of nasal mucosa treated with optimized formulation showed no significant destructive effects. In-vivo evaluations showed that the plasma level profile of prepared insitu nasal gel was enhanced significantly over oral delivery. The findings suggested that nasal route nasal transmucosal delivery of granisetron can result in enhancement of its bioavailability over oral route.

Synthesis and characterization of Chitosan-Catechol conjugates: Development and in vitro, in silico and in vivo evaluation of mucoadhesive pellets of lafutidine

2021 ◽  
pp. 088391152199784
Author(s):  
Loveleen Kaur ◽  
Ajay Kumar Thakur ◽  
Pradeep Kumar ◽  
Inderbir Singh
Keyword(s):  
Drug Release ◽  
In Silico ◽  
Ex Vivo ◽  
Strong Interactions ◽  
Dissolution Time ◽  
Sem Images ◽  
In Vivo Evaluation ◽  
Release Studies

Present study was aimed to synthesize and characterize Chitosan-Catechol conjugates and to design and develop mucoadhesive pellets loaded with lafutidine. SEM images indicated the presence of fibrous structures responsible for enhanced mucoadhesive potential of Chitosan-Catechol conjugates. Thermodynamic stability and amorphous nature of conjugates was confirmed by DSC and XRD studies respectively. Rheological studies were used to evaluate polymer mucin interactions wherein strong interactions between Chitosan-Catechol conjugate and mucin was observed in comparison to pristine chitosan and mucin. The mucoadhesion potential of Chitosan-Catechol (Cht-C) versus Chitosan (Cht) was assessed in silico using molecular mechanics simulations and the results obtained were compared with the in vitro and ex vivo results. Cht-C/mucin demonstrated much higher energy stabilization (∆E ≈ −65 kcal/mol) as compared to Cht/mucin molecular complex. Lafutidine-loaded pellets were prepared from Chitosan (LPC) and Chitosan-Catechol conjugates (LPCC) and were evaluated for various physical properties viz. flow, circularity, roundness, friability, drug content, particle size and percent mucoadhesion. In vitro drug release studies on LPC and LPCC pellets were performed for computing t50%, t90% and mean dissolution time. The values of release exponent from Korsmeyer-Peppas model was reported to be 0.443 and 0.759 for LPC and LPCC pellets suggesting Fickian and non-Fickian mechanism representing drug release, respectively. In vivo results depicted significant controlled release and enhanced residence of the drug after being released from the chitosan-catechol coated pellets. Chitosan-Catechol conjugates were found to be a promising biooadhesive polymer for the development of various mucoadhesive formulations.

scholarly journals In Vitro, Ex Vivo and In Vivo Evaluation of Microcontainers for Oral Delivery of Insulin

Pharmaceutics ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 48 ◽  
Author(s):  
Jacob Rune Jørgensen ◽  
Feiyang Yu ◽  
Ramakrishnan Venkatasubramanian ◽  
Line Hagner Nielsen ◽  
Hanne Mørck Nielsen ◽  
...  
Keyword(s):  
Oral Delivery ◽  
Ex Vivo ◽  
Sodium Dodecyl ◽  
Insulin Absorption ◽  
Oral Gavage ◽  
In Vivo Evaluation ◽  
Sodium Caprate ◽  
Intestinal Membrane

Enhancing the oral bioavailability of peptides has received a lot of attention for decades but remains challenging, partly due to low intestinal membrane permeability. Combining a permeation enhancer (PE) with unidirectionally releasing microcontainers (MCs) has previously been shown to increase insulin permeation across Caco-2 cell monolayers. In the present work, this setup was further employed to compare three common PEs—sodium caprate (C10), sodium dodecyl sulfate (SDS), and lauroyl carnitine. The concept was also studied using porcine intestinal tissue with the inclusion of 70 kDa fluorescein isothiocyanate-dextran (FD70) as a pathogen marker. Moreover, a combined proteolysis and Caco-2 cell permeation setup was developed to investigate the effect of soybean trypsin inhibitor (STI) in the MCs. Lastly, in vivo performance of the MCs was tested in an oral gavage study in rats by monitoring blood glucose and insulin absorption. SDS proved to be the most potent PE without increasing the ex vivo uptake of FD70, while the implementation of STI further improved insulin permeation in the combined proteolysis Caco-2 cell setup. However, no insulin absorption in rats was observed upon oral gavage of MCs loaded with insulin, PE and STI. Post-mortem microscopic examination of their gastrointestinal tract indicated lack of intestinal retention and optimal orientation by the MCs, possibly precluding the potential advantage of unidirectional release.

scholarly journals Development and Optimization of Proniosomal Gel Containing Etodolac: In-vitro, Ex-vivo and In-vivo Evaluation

2021 ◽  
Vol 62 (3) ◽  
pp. 290-304
Author(s):  
Moreshwar Patil ◽  
Prashant Pandit ◽  
Pavan Udavant ◽  
Sandeep Sonawane ◽  
Deepak Bhambere
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
In Vivo Evaluation ◽  
Vesicle Size ◽  
Skin Delivery ◽  
The Stability

Introduction: Etodolac is used in the treatment of acute pain and inflammation. It has low solubility because of high hydrophobicity and it is reported that upon oral administration shows gastric disturbances. This encourages the development of topical vesicular formulation. Method: In this work we used coacervation-phase separation method for the development of etodolac loaded vesicular system by using non-ionic surfactants, cholesterol and soya lecithin. Central composite design (rotatble) was used to optimize the concentrations of soy lecithin, surfactant and cholesterol. The prepared formulations were characterized by number of vesicles formed, vesicle size, zeta potential, entrapment efficiency, in-vitro permeation, ex-vivo permeation and anti-inflammatory study. Results: Etodolac was successfully entrapped in all formulations having efficiency in the range of 74.36% to 90.85%, which was more at 4 °C than room temperature. When hydrated with water; niosome in the range of 54 to 141 (per cubic mm) were spontaneously produced. The results of in-vitro diffusion study revealed that etodolac was released in the range of 71.86 to 97.16% over a period of 24 hrs. The average vesicle size of optimized formulation was found 211.9 nm with PDI of 0.5. The observed responses i.e. % encapsulation efficiency and drug release were 74.12 and 95.08 respectively. The zeta potential was -19.4mV revealed the stability of formulation which was further confirmed by no changes in drug content and drug release after stability studies. The % inhibition in paw volume was 40.52% and 43.61% for test and marketed proniosomal gel. Conclusion: Proniosomal gel formulation was stable and could enhance skin delivery of etodolac because of excellent permeation capability of vesicular system.

In vitro and In vivo Evaluation of Propranolol Microspheres Loaded Buccal Gel

2017 ◽  
Vol 10 (2) ◽  
pp. 3661-3668
Author(s):  
Gajanan J Deshmukh ◽  
M. Mohan Varma ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Ex Vivo ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
In Vivo Evaluation ◽  
Mechanical Stirring ◽  
Zero Order Kinetics

The selected propranolol microsphere formulation, S6 was employed for gel formulation with a variety of polymers like Carbopol 934, HPMC and Sodium CMC by mechanical stirring method in order to develop a sustained release propranolol microspheres containing bioadhesive gel. The prepared bioadhesive gels were evaluated for pH, viscosity, %drug content, in vitro drug release studies, bioadhesion, ex vivo permeation studies, accelerated stability and in vivo bioavailability studies. From all the above studies FG3 was found to be optimized formulation. In vitro experiments indicated a sustained release of 98.92% over 12 h and an acceptable bioadhesion quality for formulation FG3. Optimized formulation was characterized for FTIR, SEM and stability studies and found to be stable. Propranolol Optimized formulation exhibited significant increased bioavailability in vivo when compared with marketed tablet. The drug release from the optimized formulation follows zero order kinetics with anomalous Non-fickian diffusion. In vivo studies revealed that Propranolol Optimized formulation FG3 exhibited significant increased bioavailability when compared with marketed product, due to reduced first pass metabolism, when it is administered by the buccal route. Hence, it can be concluded that the formulation FG3 has potential to deliver Propranolol in a controlled and constant manner for prolong period over other formulations and can be adopted for a successful delivery of propranolol for buccal use.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Sign in / Sign up

Export Citation Format

Share Document