INFLUENCE OF ROAD SURFACES ON THE CALCULATION OF A TARGET VISIBILITY TAKING INTO ACCOUNT THE DIRECT AND INDIRECT LIGHTING

2021 ◽  
Author(s):  
L. Lebouc ◽  
V. Boucher ◽  
F. Greffier ◽  
S. Liandrat ◽  
A. Nicolaï ◽  
...  
Keyword(s):  
Road Surface ◽  
Street Lighting ◽  
Target Luminance ◽  
The Road ◽  
Road Lighting ◽  
Road Users ◽  
Road Surfaces ◽  
Indirect Lighting ◽  
On The Road ◽  
Target Visibility

Street lighting ensures visibility and legibility for road users. In this paper, performances of the lighting installation of four road sections with different type of road surface are simulated in accordance with guidelines and road lighting standards. Then, the calculation of the visibility level of a target according to the Adrian’s model is included. Next, the light reflections on the road surface are added to the calculation of the target luminance. For this, the area considered in front of the target as well as the number of elementary surfaces are fixed and a Q_0-scaling of the r-table obtained for α=45° is performed. We compare the results obtained for each section with and without considering the light reflections and conclude that there is negligible incidence of the nature of the road surface on the target luminance. However, an effect of the road surface on the visibility level of the target is observed.

A new procedure for determining the road surface reduced luminance coefficient table by on-site measurements

2018 ◽  
Vol 51 (1) ◽  
pp. 65-81 ◽  
Author(s):  
N Strbac-Hadzibegovic ◽  
S Strbac-Savic ◽  
M Kostic
Keyword(s):  
Road Surface ◽  
Surface Reflection ◽  
The Road ◽  
Road Lighting ◽  
Average Luminance ◽  
Road Surfaces ◽  
Q Values

Numerous measurements have shown that the standard R classes do not represent adequately many road surfaces used nowadays. Therefore, the construction of portable reflectometers intended for on-site measurements of road surface reflection properties has been given particular attention during the last decade. This paper presents a new procedure for the improvement of the accuracy of such a portable reflectometer. Optimally extrapolating the values of the 20 luminance coefficients (q), each measured by the portable reflectometer for a set of angles of observation (α = 5°–80°), the 20 q-values referring to α = 1° are calculated. This enables their comparison with the corresponding q elements from each of the 447 reduced q-tables derived from the available r-table database, obtained by using a precise laboratory reflectometer on a wide variety of road samples. Selecting the closest reduced q-table, the corresponding r-table and the actual average luminance coefficient can be determined. In order to validate the proposed procedure, which can also be applied to other similar portable reflectometers, measurements of the luminance and overall and longitudinal luminance uniformities were carried out on eleven road-lighting installations. They showed that the results obtained by this procedure deviate only slightly from those obtained using r-tables determined by the laboratory reflectometer.

scholarly journals Assessment of Colorimetric Parameters for HPS Lamp with Electromagnetic Control Gear and Electronic Ballast

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2909
Author(s):  
Roman Sikora ◽  
Przemysław Markiewicz
Keyword(s):  
New Technologies ◽  
Technical Condition ◽  
Road Accident ◽  
Electronic Ballast ◽  
The Road ◽  
Advantages And Disadvantages ◽  
Road Lighting ◽  
Road Users ◽  
Electromagnetic Control ◽  
On The Road

Road lighting is an important element of road infrastructure influencing on the road safety. It helps road users to identify potential hazards on the road and reduces the risk of a road accident. Improving the energy efficacy of road lighting installations requires using new technologies. Currently, high-pressure sodium (HPS) lamps are still most commonly used in road lighting. Many of the luminaires with HPS lamps are still in good technical condition and there is no economic justification for replacing them (except improving energy efficacy). One of the methods of improving their energy efficacy is to replace the electromagnetic control gear (ECG) with an electronic ballast (EB). This replacement may affect the colorimetric parameters of the HPS lamps. Two methods to the estimation change of colorimetric parameters after the replacement of ECG to EB were used. The first is CIE TN 001:2014 and the second is ANSI/IES TM-30-15. The article also presents the advantages and disadvantages of these methods in relation to the evaluation of changes in colorimetric parameters of HPS lamps after the replacement of the ECG with an EB. After the replacement of ECG to EB, the smallest reduction of Ra (colour rendering index) occurred for the 150 W lamp by 31.30% and the highest reduction for the 70 W lamp by 65.52%. Considering the changes of the fidelity indicator Rf and gamut indicator Rg, their changes are significantly smaller than for Ra. The smallest change of Rf value was observed for a 150 W lamp (6.00%) and the largest for a 70 W lamp by 25.00%. In case of Rg, similar changes were observed—for 150 W lamp by 9.26% and for 70 W lamp by 21.88%. The ANSI/IES TM-30-15 method is more suitable for evaluating colorimetric parameters after replacing ECG with EB. Using only Ra to evaluate changes of HPS lamps colorimetric parameters after replacing the ballast type can lead to incorrect conclusions concerning changes of colorimetric parameters. Based on the ANSI/IES TM-30-15 method, it has been proposed to introduce the Δf,g indicator which determines the change of colorimetric parameters based on fidelity and gamut colour indicator.

scholarly journals Predicting the Evenness of Road Surfaces

2021 ◽  
Vol 20 (3) ◽  
pp. 216-223
Author(s):  
Yu. V. Burtyl ◽  
M. G. Salodkaya ◽  
Ya. N. Kovalev
Keyword(s):  
Traffic Safety ◽  
Evaluation Criteria ◽  
Road Surface ◽  
The Road ◽  
Number Of Factors ◽  
Road Surfaces ◽  
Strength Based ◽  
On The Road ◽  
Comprehensive Indicator

The design of road surfaces involves application of  a sophisticated algorithm system based on mathematical calculations and engineering solutions, with the calculation of evaluation criteria.  It is precisely the observance of the standardized requirements in terms of design criteria that makes it possible to consider the design of the pavement as reliable, and the road as safe and convenient for traffic during the specified service life. When calculating the strength, based on the predicted traffic intensity and the composition of the traffic flow, calculations are carried out according to the main criteria: admissible elastic deflection, shear in layers of non-reinforced materials and in asphalt concrete, as well as the ultimate tensile stresses in cast-in-situ materials with the specified reliability level.  However, in the accepted concepts for  calculating the strength and reliability of road pavements,  only the force effect is directly taken into account. To take into account environmental factors, it is necessary to develop a comprehensive indicator of the resulting impact of all factors. The paper presents a complex of factors influencing on traffic safety, road deformations and irregularities the height of unevenness, in particular, an increase in the dynamic impact on the road and the amplitude of vibration of a car wheel on a road with an uneven surface (when detached from the road surface), the coincidence of the vibration frequency of the car with the natural frequencies of vibration of the road surface, and as a consequence, on the behavioral features of driving. The arguments have been substantiated that the predictive models do not take into account a number of factors that have a significant impact on the formation of irreversible deformation in the layers of materials of road structures.

scholarly journals Perancangan Dan Penataan Penerangan Jalan Umum Dengan Aplikasi Dialux evo 8.2 Di Jalan Depok Cilodong

2020 ◽  
Vol 12 (2) ◽  
pp. 111-120
Author(s):  
JUARA MANGAPUL TAMBUNAN ◽  
Albert Gifson Hutajulu ◽  
Hendrianto Husada
Keyword(s):  
Road Construction ◽  
Road User ◽  
Long Distance ◽  
Street Lighting ◽  
The Road ◽  
Road Lighting ◽  
Material Procurement ◽  
On The Road ◽  
New Research ◽  
The Impact

The increase in population, urban development and road construction are the demands of many communities in obtaining public street lighting for road users by providing better services. Public street lighting has become a necessity for many people, which is very important for two-wheeled, four-wheeled, and many-wheeled drivers for safety and comfort in traffic, especially at night. Therefore, the authors conducted a new research design by arranging public street lighting in the area of ​​the Depok Cilodong highway, with the aim of providing the beauty of the road environment by the model of the arrangement and installation of poles, pole height and PJU lamp models to the road body. Its uniqueness is seen from the perspective of the side of social and environmental impacts that are generally not seen by the local government and the level of evenness of road lighting on road materials is still lacking, so that the impact on the road user community is better and more modern. The method used with the Dialux EVO 8.2 Program for short road lengths can choose street lights taken from the IES Lighting data on the 10W Eco Led, 10 VAC Milky Way, which is installed with a height of 8 meters with a distance between poles 15 meters with a large amount of procurement allows for high costs. For the long distance of the road, you can use the 20W Led Bimasakti Eco street light, 10 VAC, which is installed with a height of 8 meters and 20 meters between the poles. So by analyzing the selection criteria, it is capable of producing street lighting with lighting levels in accordance with SNI 7391-2008 and considering the quantity of material procurement as well as the tipping point which has an impact on financing for installation services.      

DEVICE FOR THE DESTRUCTION OF SNOW-ICE FORMATIONS

2016 ◽  
Vol 3 (1) ◽  
pp. 59-62
Author(s):  
Лысянников ◽  
A. Lysyannikov ◽  
Малянов ◽  
V. Malyanov ◽  
Пашаев ◽  
...  
Keyword(s):  
Road Surface ◽  
The Road ◽  
Road Surfaces ◽  
The Creation ◽  
On The Road

The article presents the classification of snowplows, the analysis of author´s certificates and patents in the field of removal and destruction of snow-ice formations from the road surfaces and design of the working body of the machine for the destruction of snow-ice formations on the road surface due to the creation of vibration

scholarly journals Generation of effective orthophotos for road surfaces using MMS

2014 ◽  
Vol XL-5 ◽  
pp. 621-628
Author(s):  
D. Yagishita ◽  
H. Chikatsu
Keyword(s):  
Laser Scanner ◽  
Road Surface ◽  
Mobile Mapping ◽  
Video Cameras ◽  
The Road ◽  
Lack Of Information ◽  
Mapping System ◽  
Road Surfaces ◽  
Mobile Mapping System ◽  
On The Road

In recent years, high precision and high resolution road surface orthophotos have been generated using video cameras mounted on surveying vehicles. However, there is a serious issue in generating an orthophoto from this image. The shadows of the surrounding structures and vehicles on the road surface cause a lack of information and decrease in visibility. Therefore, the shadows should be removed from the images for exact road management. On the other hand, the Mobile Mapping System with a laser scanner mounted on vehicles has been receiving more attention because the laser scanner intensity is almost unaffected by shadows. This paper presents shadow extraction and shadow correction for generating road surface orthophotos using the laser scanner intensity.

Tire-Road Interactions — Harmony or Conflict?

1989 ◽  
Vol 17 (1) ◽  
pp. 66-84
Author(s):  
A. R. Williams
Keyword(s):  
Rolling Resistance ◽  
Major Effect ◽  
Road Surface ◽  
Interactive Effects ◽  
Central Theme ◽  
Water Drainage ◽  
The Road ◽  
Truck Tires ◽  
Road Surfaces ◽  
Tire Wear

Abstract This is a summary of work by the author and his colleagues, as well as by others reported in the literature, that demonstrate a need for considering a vehicle, its tires, and the road surface as a system. The central theme is interaction at the footprint, especially that of truck tires. Individual and interactive effects of road and tires are considered under the major topics of road aggregate (macroscopic and microscopic properties), development of a novel road surface, safety, noise, rolling resistance, riding comfort, water drainage by both road and tire, development of tire tread compounds and a proving ground, and influence of tire wear on wet traction. A general conclusion is that road surfaces have both the major effect and the greater potential for improvement.

scholarly journals Laboratory experiment on the nano-TiO2 photocatalytic degradation effect of road surface oil pollution

2020 ◽  
Vol 9 (1) ◽  
pp. 922-933
Author(s):  
Qing’e Wang ◽  
Kai Zheng ◽  
Huanan Yu ◽  
Luwei Zhao ◽  
Xuan Zhu ◽  
...  
Keyword(s):  
Photocatalytic Degradation ◽  
Oil Pollution ◽  
Road Surface ◽  
Test Method ◽  
Driving Safety ◽  
The Road ◽  
Road Surfaces ◽  
The Many ◽  
The Impact ◽  
Degradation Effect

AbstractOil leak from vehicles is one of the most common pollution types of the road. The spilled oil could be retained on the surface and spread in the air voids of the road, which results in a decrease in the friction coefficient of the road, affects driving safety, and causes damage to pavement materials over time. Photocatalytic degradation through nano-TiO2 is a safe, long-lasting, and sustainable technology among the many methods for treating oil contamination on road surfaces. In this study, the nano-TiO2 photocatalytic degradation effect of road surface oil pollution was evaluated through the lab experiment. First, a glass dish was used as a substrate to determine the basic working condition of the test; then, a test method considering the impact of different oil erosion degrees was proposed to eliminate the effect of oil erosion on asphalt pavement and leakage on cement pavement, which led to the development of a lab test method for the nano-TiO2 photocatalytic degradation effect of oil pollution on different road surfaces.

scholarly journals Effects of Speeds and Weights of Travelling Vehicles on the Road Surface Temperature

2021 ◽  
pp. 100077
Author(s):  
Samim Mustafa ◽  
Hidehiko Sekiya ◽  
Aya Hamajima ◽  
Iwao Maeda ◽  
Shuichi Hirano
Keyword(s):  
Surface Temperature ◽  
Road Surface ◽  
The Road ◽  
Road Surface Temperature ◽  
On The Road

scholarly journals The Effects of ITS Application in Speed Management on State Road From Mali Pozarevac to Kragujevac

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Tomislav Petrović ◽  
Miloš Milosavljević ◽  
Milan Božović ◽  
Danislav Drašković ◽  
Milija Radović
Keyword(s):  
Traffic Safety ◽  
Traffic Management ◽  
Quality Data ◽  
Transport Systems ◽  
Speed Limit ◽  
Accident Risk ◽  
The Road ◽  
Road Users ◽  
Speed Management ◽  
On The Road

The application of intelligent transport systems (hereinafter ITSs) on roads enables continuous monitoring of road users during a whole year with the aim to collect good-quality data based on which the more complex analyses could be done, such as monitoring of certain traffic safety indicators. Automatic traffic counters are one of the most commonly implemented ITSs for collecting traffic flow parameters that are relevant for traffic management on state roads in Republic of Serbia. This paper presents one of the possible ways to collect, analyze and present data on road users’ speeds using automatic traffic counters, where certain traffic safety indicators are analyzed in terms of road users’ compliance with the speed limit on the road section from Mali Pozarevac to Kragujevac. Based on the analyses of data downloaded from automatic traffic counters, it is observed that an extremely high percentage of vehicles drive at speed higher than the speed limit, indicating clearly to higher traffic accident risk, as well as to the need for a tendency to implement speed management on roads using ITS in the forthcoming period.

Sign in / Sign up

Export Citation Format

Share Document