Role of High Fidelity Nonequilibrium Modeling in Laminar and Turbulent Flows for High Speed ISR Missions

2016 ◽  
Author(s):  
Konstantinos Vogiatzis ◽  
Eswar Josyula ◽  
Prakash Vedula
Keyword(s):  
Turbulent Flows ◽  
High Speed ◽  
High Fidelity ◽  
Laminar And Turbulent Flows

scholarly journals Performance of high-speed hydrodynamic sliding bearings with lubricating oils combining laminar and turbulent flows

2020 ◽  
Vol 12 (6) ◽  
pp. 168781402093338
Author(s):  
Yingjia Wang ◽  
Minshan Liu ◽  
Dongchen Qin ◽  
Zhenwei Yan
Keyword(s):  
Turbulent Flows ◽  
Working Conditions ◽  
High Speed ◽  
Flow State ◽  
Mixed Flow ◽  
Sliding Bearings ◽  
Oil Film ◽  
Flow Changes ◽  
Laminar And Turbulent Flows ◽  
Flow States

High-speed hydrodynamic sliding bearings use lubricating oil that can have laminar and turbulent flow states, yet turbulent states remain relatively unstudied. This study combines theoretical analysis, numerical modeling, and experiments to analyze lubrication fluids in such bearings. It considers Reynolds equations, energy equations, and temperature-viscosity relationships under laminar and turbulent flows. The governing equations are solved by the finite difference method. Two-dimensional distributions of Reynolds number, pressure, and temperature in the bearing film, as well as the lubrication characteristics like bearing capacity and frictional force under working conditions, are analyzed. Single and mixed flow states are compared, which demonstrates the coexistence states of laminar and turbulent flows in an oil film under specific working conditions. Oil film flow distributions differ significantly according to rotational speed and eccentric conditions. Flow changes under high eccentricity are complex. The characteristics of oil films in a single flow state deviate significantly from those in mixed flow. Changes in flow state and heat should not be ignored during analysis of the lubrication performance of high-speed bearings.

scholarly journals CompoundRay: An open-source tool for high-speed and high-fidelity rendering of compound eyes

2021 ◽  
Author(s):  
Blayze F Millward ◽  
Steve Maddock ◽  
Michael Mangan
Keyword(s):  
Open Source ◽  
Visual Information ◽  
High Speed ◽  
Compound Eye ◽  
Compound Eyes ◽  
High Fidelity ◽  
Desert Ant ◽  
New Generation ◽  
The Impact

Revealing the functioning of non-standard visual systems such as compound eyes is of interest to biologists and engineers alike. A key investigative method is to replicate the sensory apparatus using artificial systems, allowing for investigation of the visual information that drives animal behaviour when exposed to environmental cues. To date, 'Compound Eye Models' (CEMs) have largely explored the impact of features such as spectral sensitivity, field of view, and angular resolution on behaviour. Yet, the role of shape and overall structure have been largely overlooked due to modelling complexity. However, modern real-time raytracing technologies are enabling the construction of a new generation of computationally fast, high-fidelity CEMs. This work introduces new open-source CEM software (CompoundRay) alongside standardised usage techniques, while also discussing the difficulties inherent with visual data display and analysis of compound eye perceptual data. CompoundRay is capable of accurately rendering the visual perspective of a desert ant at over 5,000 frames per second in a 3D mapped natural environment. It supports ommatidial arrangements at arbitrary positions with per-ommatidial heterogeneity.

The sedimentary environment

2021 ◽  
pp. 3-18
Author(s):  
Simon F. Thrush ◽  
Judi E. Hewitt ◽  
Conrad A. Pilditch ◽  
Alf Norkko
Keyword(s):  
Turbulent Flows ◽  
Sedimentary Environment ◽  
Critical Factor ◽  
Ecosystem Functions ◽  
Soft Sediment ◽  
Earth System ◽  
Hydrodynamic Conditions ◽  
Habitat Variation ◽  
Laminar And Turbulent Flows

This chapter introduces the roles of sediment properties and hydrodynamic conditions in influencing soft-sediment communities. It identifies environmental factors that are commonly used to characterise soft-sediment habitats and used to tease out the role of habitat variation from other factors that influence populations and communities. The differences between cohesive and non-cohesive sediments that profoundly influence ecosystem functions are described. Hydrodynamics particularly at the sediment–water interface are introduced as a critical factor affecting many ecosystem processes. The chapter introduces the differences in laminar and turbulent flows. Coastal soft sediments in particular are places of high organic matter remineralisation and thus critical for the recycling of primary nutrients and primary production, particularly by microphytobenthos. These factors underpin the important role of marine sediments in biogeochemistry and earth system processes.

Evaluation of Reattaching Shear-Layer in Compressible Turbulent Flows: A Large Eddy Simulation Approach

2020 ◽  
Author(s):  
Rozie Zangeneh
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Shear Layer ◽  
Turbulent Flows ◽  
High Speed ◽  
High Fidelity ◽  
Free Shear Layer ◽  
Eddy Simulation ◽  
Shock Unsteadiness ◽  
Large Eddy

Abstract The boundary-layer separation and subsequent reattachment due to the free shear-layer and Shockwave interaction have a significant impact on the aerothermal design of supersonic aerospace systems. This problem is prevalent in high-speed flights and can significantly affect the skin friction, aerodynamic loads, and heat transfer. In recent years, considerable progress has been achieved in the prediction of turbulent compressible flows using high-fidelity models. However, the prediction of reattaching free shear-layer and shockwave interactions still needs to be modified for accurate predictivity. The objective of this study is to investigate the ability of a new computational fluid dynamics model to predict these critical flow phenomena accurately. The new high-fidelity model is based on a collocated central scheme, which has the advantage of being a Riemann free solver, and therefore easy to implement on unstructured grids. It is developed to capture any discontinuities at shocks while it is able to capture broadband spatial and temporal variations in turbulent flows with minimal dissipation and dispersion. Large Eddy Simulation is performed on a compression corner at a Mach number of 2.92 and a high Reynolds number. The geometry of the model is specifically designed to isolate the reattachment process of a high-speed separated flow. To examine the accuracy of the predicted results, results of velocity profiles in the free shear-layer, boundary layer development, turbulent fluctuations, and pressure are compared to an experimental effort by Princeton. Excellent agreement is observed, and it is recommended that the model can be used to investigate the physics of the shock unsteadiness due to interaction with a free shear-layer.

A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater: Part I

TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 20-26 ◽  
Author(s):  
PEEYUSH TRIPATHI ◽  
MARGARET JOYCE ◽  
PAUL D. FLEMING ◽  
MASAHIRO SUGIHARA
Keyword(s):  
Boundary Layer ◽  
Experimental Design ◽  
High Speed ◽  
Statistical Study ◽  
Process Variables ◽  
High Speeds ◽  
The Stability ◽  
Air Removal ◽  
Removal System

Using an experimental design approach, researchers altered process parameters and material prop-erties to stabilize the curtain of a pilot curtain coater at high speeds. Part I of this paper identifies the four significant variables that influence curtain stability. The boundary layer air removal system was critical to the stability of the curtain and base sheet roughness was found to be very important. A shear thinning coating rheology and higher curtain heights improved the curtain stability at high speeds. The sizing of the base sheet affected coverage and cur-tain stability because of its effect on base sheet wettability. The role of surfactant was inconclusive. Part II of this paper will report on further optimization of curtain stability with these four variables using a D-optimal partial-facto-rial design.

LANDSLIDE RISK MANAGEMENT IN THE COASTAL ZONE OF THE KUIBYSHEV RESERVOIR DUE THE DESIGN OF HIGH-SPEED LINE "MOSCOW-KAZAN"

2017 ◽  
Author(s):  
Nikolai Petrov ◽  
Nikolai Petrov ◽  
Inna Nikonorova ◽  
Inna Nikonorova ◽  
Vladimir Mashin ◽  
...  
Keyword(s):  
High Speed ◽  
Computational Models ◽  
Stable State ◽  
Landslide Risk ◽  
Kuibyshev Reservoir ◽  
Stepped Surface ◽  
The Stability ◽  
Landslide Slope ◽  
The Village

High-speed railway "Moscow-Kazan" by the draft crosses the Volga (Kuibyshev reservoir) in Chuvashia region 500 m below the village of New Kushnikovo. The crossing plot is a right-bank landslide slope with a stepped surface. Its height is 80 m; the slope steepness -15-16o. The authors should assess the risk of landslides and recommend anti-landslide measures to ensure the safety of the future bridge. For this landslide factors have been analyzed, slope stability assessment has been performed and recommendations have been suggested. The role of the following factors have been analyzed: 1) hydrologic - erosion and abrasion reservoir and runoff role; 2) lithologyc (the presence of Urzhum and Northern Dvina horizons of plastically deformable rocks, displacement areas); 3) hydrogeological (the role of perched, ground and interstratal water); 4) geomorphological (presence of the elemental composition of sliding systems and their structure in the relief); 5) exogeodynamic (cycles and stages of landslide systems development, mechanisms and relationship between landslide tiers of different generations and blocks contained in tiers). As a result 6-7 computational models at each of the three engineering-geological sections were made. The stability was evaluated by the method “of the leaning slope”. It is proved that the slope is in a very stable state and requires the following measures: 1) unloading (truncation) of active heads blocks of landslide tiers) and the edge of the plateau, 2) regulation of the surface and groundwater flow, 3) concrete dam, if necessary.

scholarly journals Getting High: High Fidelity Simulation of High Granularity Calorimeters with High Speed

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Erik Buhmann ◽  
Sascha Diefenbacher ◽  
Engin Eren ◽  
Frank Gaede ◽  
Gregor Kasieczka ◽  
...  
Keyword(s):  
Particle Physics ◽  
High Speed ◽  
Deep Neural Networks ◽  
High Fidelity ◽  
High Fidelity Simulation ◽  
Physical Processes ◽  
Electromagnetic Showers ◽  
Information Bottleneck ◽  
First Time ◽  
Processing Network

AbstractAccurate simulation of physical processes is crucial for the success of modern particle physics. However, simulating the development and interaction of particle showers with calorimeter detectors is a time consuming process and drives the computing needs of large experiments at the LHC and future colliders. Recently, generative machine learning models based on deep neural networks have shown promise in speeding up this task by several orders of magnitude. We investigate the use of a new architecture—the Bounded Information Bottleneck Autoencoder—for modelling electromagnetic showers in the central region of the Silicon-Tungsten calorimeter of the proposed International Large Detector. Combined with a novel second post-processing network, this approach achieves an accurate simulation of differential distributions including for the first time the shape of the minimum-ionizing-particle peak compared to a full Geant4 simulation for a high-granularity calorimeter with 27k simulated channels. The results are validated by comparing to established architectures. Our results further strengthen the case of using generative networks for fast simulation and demonstrate that physically relevant differential distributions can be described with high accuracy.

Sign in / Sign up

Export Citation Format

Share Document